Android蓝牙打印机例子

上一篇是佳博网络打印机的，这一篇是关于蓝牙（不是低功耗4.0）打印机的例子。

/**
	 * 检查是否有纸指令
	 */
	public static final byte[] stateBype = new byte[] { 0x10, 0x04, 0x04 };
	/**
	 * 检查是否有纸指令
	 */
//	public static final byte[] stateBype2 = new byte[] { 0x1B, 0x76 };
	/**
	 * 居左对齐
	 */
	public static final Byte[] toLeft = new Byte[] { 0x1B, 0x61, 0x00 };
	/**
	 * 居中对齐
	 */
	public static final Byte[] toCenter = new Byte[] { 0x1B, 0x61, 0x01 };
	/**
	 * 加大2倍
	 */
	public static final Byte[] toLarge = new Byte[] { 0x1D, 0x21, 0x11 };
	/**
	 * 取消加大
	 */
	public static final Byte[] cancleLarge = new Byte[] { 0x1D, 0x21, 0x00 };
	/**
	 * 加粗
	 */
	public static final Byte[] toLarge2 = new Byte[] { 0x1B, 0x45, 0x01 };
	/**
	 * 取消加粗
	 */
	public static final Byte[] cancleLarge2 = new Byte[] { 0x1B, 0x45, 0x00 };
	/**
	 * 加载走纸命令
	 */
	public static final Byte[] cut = new Byte[] { 0x1D, 0x56, 0x42, 0x00 };// 切纸并且走纸

	
	/**
	 * 设置模型
	 */
	public static final Byte[] setCodeModel = new Byte[] { 0x1D, 0x28, 0x6B, 0x04, 0x00, 0x31, 0x41, 0x32, 0x00 };
	/**
	 * 设置单元格大小
	 */
	public static final Byte[] setCodeSize = new Byte[] { 0x1D, 0x28, 0x6B, 0x03, 0x00, 0x31, 0x43, 0x09 };
	/**
	 * 设置纠错正等级
	 */
	public static final Byte[] setCodeLevel = new Byte[] { 0x1D, 0x28, 0x6B, 0x03, 0x00, 0x31, 0x45, 0x30 };
	/**
	 * 加载二维码
	 */
	public static Byte[] setCode = new Byte[8];
	/**
	 * 打印二维码
	 */
	public static final Byte[] printCode = new Byte[] { 0x1D, 0x28, 0x6B, 0x03, 0x00, 0x31, 0x51, 0x30 };
	/**
	 * 设置加载二维码指令
	 * @param code
	 */
	public static void doSetCode(String code) {
		Common.showDeBug((byte) code.length());
		setCode[0] = 0x1D;
		setCode[1] = 0x28;
		setCode[2] = 0x6B;
		setCode[3] = (byte) (code.length()+3);
		setCode[4] = 0x00;
		setCode[5] = 0x31;
		setCode[6] = 0x50;
		setCode[7] = 0x30;
	}
	
	/**
	 * 合并两个byte数组
	 * 
	 * @param byte_1
	 * @param byte_2
	 * @return
	 */
	public static byte[] byteMerger(byte[] byte_1, byte[] byte_2) {
		byte[] byte_3 = new byte[byte_1.length+byte_2.length];
		System.arraycopy(byte_1, 0, byte_3, 0, byte_1.length);
		System.arraycopy(byte_2, 0, byte_3, byte_1.length, byte_2.length);
		return byte_3;
	}

	/**
	 * int[]转byte[]
	 * @param arg
	 * @return
	 */
	public static byte[] intTobyte(int arg[]) {
		byte[] byteTmp = new byte[arg.length];
		for (int i = 0; i < arg.length; i++) {
			byteTmp[i] = (byte)arg[i];
		}
		return byteTmp;
	}
	
	/**
	 * byte转Byte
	 * 
	 * @param srcArray
	 * @param cpyArray
	 */
	public static void CopyArray(byte[] srcArray, Byte[] cpyArray) {
		for (int index = 0; index < cpyArray.length; index++) {
			cpyArray[index] = srcArray[index];
		}
	}

	/**
	 * List<Byte>转换为byte[]
	 * @param ByteArray
	 * @return
	 */
	public static byte[] convertFromListByteArrayTobyteArray(
			List<Byte> ByteArray) {
		byte[] byteArray = new byte[ByteArray.size()];
		for (int index = 0; index < byteArray.length; index++) {
			byteArray[index] = ByteArray.get(index);
		}

		return byteArray;
	}
	
	/**
	 * 去重复
	 * @param li
	 * @return
	 */
	public static List<String> removeDuplicateWithOrder(List<String> li) {
		List<String> list = new ArrayList<String>();
        for(int i=0; i<li.size(); i++){
            String str = li.get(i);  //获取传入集合对象的每一个元素
            if(!list.contains(str)){   //查看新集合中是否有指定的元素，如果没有则加入
                list.add(str);
            }
        }
        return list;  //返回集合
    }

检查打印机纸的状态：

/**
	 * 佳博蓝牙打印机，检查纸的状态：
	 * 当接收状态为18时，表示蓝牙打印机是正常状态；接收状态为114(无纸)或114(没关盖)时，表示不正常状态
	 */
	public int doCheckJiaboPaperState() {
		/**1：正常，0：异常，-1：链接失败*/
		int flag = 0;
		try {
			InputStream bis = bluetoothSocket.getInputStream(); 
			outputStream.write(BlueThPrintInfo.stateBype);
			outputStream.flush();
			int tmp = bis.read();
			if (tmp == 18) {
				flag = 1;
			} else {
				flag = 0;
			}
		} catch (Exception e) {
			flag = -1;
			e.printStackTrace();
		}
		return flag;
	}

剩下的步骤和上一篇Android网络打印机一样。这里就不一一说明了。