linux下C语言errno

转载 2013年12月02日 13:48:49

转自http://www.virtsync.com/c-error-codes-include-errno

All the Linux/C error codes are listed below.

I occasionally google C error codes, but always end up grepping through /usr/include to find the answer. To save myself, and a few others, some time in the future...

/usr/include/asm-generic/errno-base.h

#ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H

#define EPERM        1  /* Operation not permitted */
#define ENOENT       2  /* No such file or directory */
#define ESRCH        3  /* No such process */
#define EINTR        4  /* Interrupted system call */
#define EIO      5  /* I/O error */
#define ENXIO        6  /* No such device or address */
#define E2BIG        7  /* Argument list too long */
#define ENOEXEC      8  /* Exec format error */
#define EBADF        9  /* Bad file number */
#define ECHILD      10  /* No child processes */
#define EAGAIN      11  /* Try again */
#define ENOMEM      12  /* Out of memory */
#define EACCES      13  /* Permission denied */
#define EFAULT      14  /* Bad address */
#define ENOTBLK     15  /* Block device required */
#define EBUSY       16  /* Device or resource busy */
#define EEXIST      17  /* File exists */
#define EXDEV       18  /* Cross-device link */
#define ENODEV      19  /* No such device */
#define ENOTDIR     20  /* Not a directory */
#define EISDIR      21  /* Is a directory */
#define EINVAL      22  /* Invalid argument */
#define ENFILE      23  /* File table overflow */
#define EMFILE      24  /* Too many open files */
#define ENOTTY      25  /* Not a typewriter */
#define ETXTBSY     26  /* Text file busy */
#define EFBIG       27  /* File too large */
#define ENOSPC      28  /* No space left on device */
#define ESPIPE      29  /* Illegal seek */
#define EROFS       30  /* Read-only file system */
#define EMLINK      31  /* Too many links */
#define EPIPE       32  /* Broken pipe */
#define EDOM        33  /* Math argument out of domain of func */
#define ERANGE      34  /* Math result not representable */

#endif

/usr/include/asm-generic/errno.h

#ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H

#include <asm-generic/errno-base.h>

#define EDEADLK     35  /* Resource deadlock would occur */
#define ENAMETOOLONG    36  /* File name too long */
#define ENOLCK      37  /* No record locks available */
#define ENOSYS      38  /* Function not implemented */
#define ENOTEMPTY   39  /* Directory not empty */
#define ELOOP       40  /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN  /* Operation would block */
#define ENOMSG      42  /* No message of desired type */
#define EIDRM       43  /* Identifier removed */
#define ECHRNG      44  /* Channel number out of range */
#define EL2NSYNC    45  /* Level 2 not synchronized */
#define EL3HLT      46  /* Level 3 halted */
#define EL3RST      47  /* Level 3 reset */
#define ELNRNG      48  /* Link number out of range */
#define EUNATCH     49  /* Protocol driver not attached */
#define ENOCSI      50  /* No CSI structure available */
#define EL2HLT      51  /* Level 2 halted */
#define EBADE       52  /* Invalid exchange */
#define EBADR       53  /* Invalid request descriptor */
#define EXFULL      54  /* Exchange full */
#define ENOANO      55  /* No anode */
#define EBADRQC     56  /* Invalid request code */
#define EBADSLT     57  /* Invalid slot */

#define EDEADLOCK   EDEADLK

#define EBFONT      59  /* Bad font file format */
#define ENOSTR      60  /* Device not a stream */
#define ENODATA     61  /* No data available */
#define ETIME       62  /* Timer expired */
#define ENOSR       63  /* Out of streams resources */
#define ENONET      64  /* Machine is not on the network */
#define ENOPKG      65  /* Package not installed */
#define EREMOTE     66  /* Object is remote */
#define ENOLINK     67  /* Link has been severed */
#define EADV        68  /* Advertise error */
#define ESRMNT      69  /* Srmount error */
#define ECOMM       70  /* Communication error on send */
#define EPROTO      71  /* Protocol error */
#define EMULTIHOP   72  /* Multihop attempted */
#define EDOTDOT     73  /* RFS specific error */
#define EBADMSG     74  /* Not a data message */
#define EOVERFLOW   75  /* Value too large for defined data type */
#define ENOTUNIQ    76  /* Name not unique on network */
#define EBADFD      77  /* File descriptor in bad state */
#define EREMCHG     78  /* Remote address changed */
#define ELIBACC     79  /* Can not access a needed shared library */
#define ELIBBAD     80  /* Accessing a corrupted shared library */
#define ELIBSCN     81  /* .lib section in a.out corrupted */
#define ELIBMAX     82  /* Attempting to link in too many shared libraries */
#define ELIBEXEC    83  /* Cannot exec a shared library directly */
#define EILSEQ      84  /* Illegal byte sequence */
#define ERESTART    85  /* Interrupted system call should be restarted */
#define ESTRPIPE    86  /* Streams pipe error */
#define EUSERS      87  /* Too many users */
#define ENOTSOCK    88  /* Socket operation on non-socket */
#define EDESTADDRREQ    89  /* Destination address required */
#define EMSGSIZE    90  /* Message too long */
#define EPROTOTYPE  91  /* Protocol wrong type for socket */
#define ENOPROTOOPT 92  /* Protocol not available */
#define EPROTONOSUPPORT 93  /* Protocol not supported */
#define ESOCKTNOSUPPORT 94  /* Socket type not supported */
#define EOPNOTSUPP  95  /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT    96  /* Protocol family not supported */
#define EAFNOSUPPORT    97  /* Address family not supported by protocol */
#define EADDRINUSE  98  /* Address already in use */
#define EADDRNOTAVAIL   99  /* Cannot assign requested address */
#define ENETDOWN    100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET   102 /* Network dropped connection because of reset */
#define ECONNABORTED    103 /* Software caused connection abort */
#define ECONNRESET  104 /* Connection reset by peer */
#define ENOBUFS     105 /* No buffer space available */
#define EISCONN     106 /* Transport endpoint is already connected */
#define ENOTCONN    107 /* Transport endpoint is not connected */
#define ESHUTDOWN   108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS    109 /* Too many references: cannot splice */
#define ETIMEDOUT   110 /* Connection timed out */
#define ECONNREFUSED    111 /* Connection refused */
#define EHOSTDOWN   112 /* Host is down */
#define EHOSTUNREACH    113 /* No route to host */
#define EALREADY    114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE      116 /* Stale NFS file handle */
#define EUCLEAN     117 /* Structure needs cleaning */
#define ENOTNAM     118 /* Not a XENIX named type file */
#define ENAVAIL     119 /* No XENIX semaphores available */
#define EISNAM      120 /* Is a named type file */
#define EREMOTEIO   121 /* Remote I/O error */
#define EDQUOT      122 /* Quota exceeded */

#define ENOMEDIUM   123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED   125 /* Operation Canceled */
#define ENOKEY      126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED    129 /* Key was rejected by service */

/* for robust mutexes */
#define EOWNERDEAD  130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */

#endif

相关文章推荐

linux中c语言errno的使用

在linux中使用c语言编程时,errno是个很有用的动动。他可以把最后一次调用c的方法的错误代码保留。但是如果最后一次成功的调用c的方法,errno不会改变。因此,只有在c语言函数返回值异常时,再检...

c语言所有的errno枚举值含义

可以通过以下代码,获取所有的错误码信息: #include /* for strerror */ #include #include int main(int argc, char ** a...

Linux下errno错误信息对照

在库函数中有个errno变量,每个errno值对应着以字符串表示的错误类型。以下主要来自2.6.32的内核代码中的/usr/include/asm-generic/errno.h及errno-base...
  • gatieme
  • gatieme
  • 2016年01月22日 16:14
  • 1578

Linux下错误的捕获:errno和strerror的使用

经常在调用linux 系统api 的时候会出现一些错误,比方说使用open() write() creat()之类的函数有些时候会返回-1,也就是调用失败,这个时候往往需要知道失败的原因。这个时候使用...

Socket通信——Linux下,errno=EINTR的错误处理

socket接口,例如recv接口会做2件事情: 1.检查buffer是否有数据,有则复制清除返回 2.没有数据,则进入睡眠模式,当超时、数据到达、发生错误则唤醒进程处理 采用睡眠来等待,发生信...

【工控机开发】linux下错误的捕获:errno和strerror的使用

经常在调用linux 系统api 的时候会出现一些错误,比方说使用open() write() creat()之类的函数有些时候会返回-1,也就是调用失败,这个时候往往需要知道失败的原因。这个时候使用...

linux下特殊errno的处理

1.  对EINTR的处理   在errno对照表中,EINTR翻译过来的意思就是系统调用被中断,下面是在不同的函数中表示的意思,当然这个错误不仅仅只在下面的函数被调用时才会出现的,因此在写代码时,...
  • xtx1990
  • xtx1990
  • 2012年08月07日 14:10
  • 840

Linux下各个errno的意思

#include #include #include int main(int argc, char ** argv) {     int i = 0;     for(i ...
  • fickyou
  • fickyou
  • 2016年03月08日 11:21
  • 1307

linux下错误的捕获:errno和strerror的使用

经常在调用linux 系统api 的时候会出现一些错误,比方说使用open() write() creat()之类的函数有些时候会返回-1,也就是调用失败,这个时候往往需要知道失败的原因。这个时候使用...

Linux下system()函数返错,errno是ECHILD

转载自:http://my.oschina.net/renhc/blog/54582 今天,一个运行了近一年的程序突然挂掉了,问题定位到是system()函数出的问题,关于该函数的简单使用在我上篇文...
内容举报
返回顶部
收藏助手
不良信息举报
您举报文章:linux下C语言errno
举报原因:
原因补充:

(最多只允许输入30个字)