Linux上实现mpls，ldpd（Quagga）完整步骤

MPLS LDPD LINUX EXPERIMENT(Quagga)

本文为原创，禁止转载。
文章是在个人研究怎么在LINUX上实现MPLS的总结。暂时LINUX上还没法实现BGP MPLS VPN

1.Build a linux environment supporting mpls ,quagga and ldpd

建立MPLS在linux上转发基础环境的步骤

1) upgrade kernel

It need linux kernel support mpls stack.Such kernel 4.6
需要linux内核支持mpls模块，更新内核

1. wget
   wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.6-yakkety/linux-headers-4.6.0-040600_4.6.0-040600.201606100558_all.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.6-yakkety/linux-headers-4.6.0-040600-generic_4.6.0-040600.201606100558_amd64.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.6-yakkety/linux-image-4.6.0-040600-generic_4.6.0-040600.201606100558_amd64.deb

2. install
   dpkg -i *.deb

3. update grub and reboot
   update-grub
reboot

2) Enable MPLS in kernel

调整MPLS内核参数，启用MPLS stack

modprobe mpls_router
modprobe mpls_gso
modprobe mpls_iptunnel
sysctl -w net.mpls.conf.eth0.input=1
sysctl -w net.mpls.conf.lo.input=1
sysctl -w net.mpls.platform_labels=1048575

You’ll need to set net.mpls.conf.[interface-name].input=1 for any other interfaces that you plan to receive MPLS packets on, otherwise the MPLS route table won’t accept your routes

3) Install quagga-ldp