DM9000网卡驱动的移植

a)      #make menuconfig

进入配置菜单选中

driver——

net——

10/100M net——

DM9000 support

b)     

 在arch/arm/plat-s3c24xx/devs.c（也可做在arch/arm/mach-s3c2440/mach-smdk2440.c中的）

 中加入DM9000A的端口及设备说明，仿照前面的设备添加就是了，结构都一样就是值不同。

static struct resource s3c_dm9k_resource[] = {

         [0] = {

                   .start = 0x18000000,                  

//dm9000a的片选我的板子接的是nGCS3,这里没有加300的基址

                   .end   = 0x18000003,               

//这里搞不懂为什么是加3[可能因为是块设备吧]

                   .flags = IORESOURCE_MEM,

         },

         [1] = {

                   .start = 0x18000004,                  

//因为CMD接的是A2，其为1时就是数据端口

                   .end   = 0x18000007,               

//0X3F,0X7F，为什么是这个地址

                   .flags = IORESOURCE_MEM,

         },

         [2] = {

                   .start = IRQ_EINT9,                            //根据电路图接的是EINT9管脚

                   .end   = IRQ_EINT9,

                   .flags = IORESOURCE_IRQ,

//               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, //at2440evb中的设置

         }

};

 

static struct dm9000_plat_data s3c_device_dm9k_pdata = {

//      .flags         = (DM9000_PLATF_16BITONLY|DM9000_PLATF_NO_EEPROM), //at2440evb中的设置

         .flags         = DM9000_PLATF_16BITONLY

};

 

static struct platform_device s3c_device_dm9k = {

         .name                 = "dm9000",

         .id              = -1,

         .num_resources        = ARRAY_SIZE(s3c_dm9k_resource),

         .resource  = s3c_dm9k_resource,

         .dev           = {

                                     .platform_data          = &s3c_device_dm9k_pdata,

         },

};

 

EXPORT_SYMBOL(s3c_device_dm9k);

c)      arch/arm/plat-s3c24xx/include/plat/devs.h中添加网卡声明

extern struct platform_device s3c_device_dm9k;

d)      arch/arm/mach-s3c2440/ mach-s3c2440.c中将dm9000a加到平台设备初始化列表中

static struct platform_device *smdk2440_devices[] __initdata = {

         &s3c_device_usb,

         &s3c_device_lcd,

         &s3c_device_wdt,

         &s3c_device_i2c,

         &s3c_device_iis,

         &s3c_device_dm9k,

};至此，向内核注册DM9000A已经完成。

e)      在drivers/net/dm9000.c开头中添加

#include <mach/regs-gpio.h>

#define     EINTMASK      (0x560000a4)            //外部中断屏蔽

#define     EXTINT1  (0x5600008c)                     //外部中断方式

#define     INTMSK  (0x4a000008)                     //中断屏蔽

在dm9000_probe（）中ret = register_netdev(ndev); 1392行，之前添加

memcpy(ndev->dev_addr,"/oandy1",6);

extint1      =ioremap_nocache(EXTINT1,0x00000004);

intmsk     =ioremp_nocache(INTMSK,4);

 

s3c2410_gpio_cfgpin(s3c2410_GPG1,s3c2410_GPG1_EINT9); //设置GPG1为中断功能

writel(readl(extint1)|0x40,extint1);                   //中断为上升沿

writel(readl(intmsk)&0xfff1,intmsk);

 

iounmap(intmsk);

iounmap(extint1);

f)      第二种方案是直接参考/arch/arm/mach-s3c2440/mach-at2440evb.c进行修改，我按照此方案更改完全有效。

i.       修改/arch/arm/mach-s3c2440/mach-smdk2440.c拷贝/arch/arm/mach-s3c2440/mach-at2440evb.c中关于DM9000AEP的代码进行修改：

         #include <linux/dm9000.h>

static struct resource s3c_dm9k_resource[] = {

         [0] = {

                   .start = S3C2410_CS3,

                   .end   = S3C2410_CS3 + 3,

                   .flags = IORESOURCE_MEM

         },

         [1] = {

                   .start = S3C2410_CS3 + 4,

                   .end   = S3C2410_CS3 + 7,

                   .flags = IORESOURCE_MEM

         },

         [2] = {

                   .start = IRQ_EINT9,

                   .end   = IRQ_EINT9,

                   .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,

         }

};

 

static struct dm9000_plat_data s3c_dm9k_pdata = {

         .flags                  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),

};

 

static struct platform_device s3c_device_dm9k = {

         .name                 = "dm9000",

         .id              = -1,

         .num_resources         = ARRAY_SIZE(s3c_dm9k_resource),

         .resource   = s3c_dm9k_resource,

         .dev           = {

                   .platform_data          = & s3c_dm9k_pdata,

         },

};

这段代码加在static struct platform_device *smdk2440_devices[] __initdata之前，修改设备初始化

static struct platform_device *smdk2440_devices[] __initdata = {

         &s3c_device_usb,

         &s3c_device_lcd,

         &s3c_device_wdt,

         &s3c_device_i2c,

         &s3c_device_iis,

         &s3c_device_dm9k,

};

g)      修改根文件系统/etc/init.d/rcS配置网卡，增加下面的代码

ifconfig lo 127.0.0.1

ifconfig eth0 hw ether 08:00:3e:26:0a:5b

ifconfig eth0 192.168.1.70

route add default gw 192.168.1.1

h)      配置内核：

                   #make menuconfig

                            Device Drivers—

                      Network device support—

                      Ethernet(10 or 10Mbit)—

                      DM9000 support