C# Coding Style Guide

原创 2005年04月23日 19:15:00

C# Coding Style Guide

Version 0.3
by Mike Krüger icsharpcode.net

  1. About the C# Coding Style Guide...................................................................................1
  2. File Organization.............................................................................................................1
  3. Indentation......................................................................................................................2
  4. Comments......................................................................................................................3
  5. Declarations....................................................................................................................4
  6. Statements......................................................................................................................5
  7. White Space...................................................................................................................7
  8. Naming Conventions.......................................................................................................9
  9. Programming Practices...................................................................................................11
  10. Code Examples..............................................................................................................12

1. About the C# Coding Style Guide

This document may be read as a guide to writing robust and reliable programs. It focuses on programs written in C#, but many of the rules and principles are useful even if you write in another programming language.

2. File Organization

2.1 C# Sourcefiles

Keep your classes/files short, don't exceed 2000 LOC, divide your code up, make structures clearer. Put every class in a separate file and name the file like the class name (with .cs as extension of course). This convention makes things much easier.

2.2 Directory Layout

Create a directory for every namespace. (For MyProject.TestSuite.TestTier use MyProject/TestSuite/TestTier as the path, do not use the namespace name with dots.) This makes it easier to map namespaces to the directory layout.

3. Indentation

3.1 Wrapping Lines

When an expression will not fit on a single line, break it up according to these general principles:

Break after a comma. Break after an operator. Prefer higher-level breaks to lower-level breaks. Align the new line with the beginning of the expression at the same level on the previous line

Example of breaking up method calls:

longMethodCall(expr1, expr2,
               expr3, expr4, expr5);

Examples of breaking an arithmetic expression:

PREFER:

var = a * b / (c - g + f) +
      4 * z;

BAD STYLE – AVOID:

var = a * b / (c - g +
      f) + 4 * z;

The first is preferred, since the break occurs outside the paranthesized expression (higher level rule). Note that you indent with tabs to the indentation level and then with spaces to the breaking position in our example this would be:


> var = a * b / (c - g + f) +
> ......4 * z;

Where '>' are tab chars and '.' are spaces. (the spaces after the tab char are the indent with of the tab). A good coding practice is to make the tab and space chars visible in the editor which is used.

3.2 White Spaces

An indentation standard using spaces never was achieved. Some people like 2 spaces, some prefer 4 and others die for 8, or even more spaces. Better use tabs. Tab characters have some advantages:

Everyone can set their own preferred indentation level It is only 1 character and not 2, 4, 8 … therefore it will reduce typing (even with smartindenting you have to set the indentation manually sometimes, or take it back or whatever) If you want to increase the indentation (or decrease), mark one block and increase the indent level with Tab with Shift-Tab you decrease the indentation. This is true for almost any texteditor.

Here, we define the Tab as the standard indentation character.

Don't use spaces for indentation - use tabs!

4. Comments

4.1 Block Comments

Block comments should usually be avoided. For descriptions use of the /// comments to give C# standard descriptions is recommended. When you wish to use block comments you should use the following style :


/* Line 1
* Line 2
* Line 3
*/

As this will set off the block visually from code for the (human) reader. Alternatively you might use this oldfashioned C style for single line comments, even though it is not recommended. In case you use this style, a line break should follow the comment, as it is hard to see code preceeded by comments in the same line:


/* blah blah blah */

Block comments may be useful in rare cases, refer to the TechNote 'The fine Art of Commenting' for an example. Generally block comments are useful for comment out large sections of code.

4.2 Single Line Comments

You should use the // comment style to "comment out" code (SharpDevelop has a key for it, Alt+/) . It may be used for commenting sections of code too.

Single line comments must be indented to the indent level when they are used for code documentation. Commented out code should be commented out in the first line to enhance the visibility of commented out code.

A rule of thumb says that generally, the length of a comment should not exceed the length of the code explained by too much, as this is an indication of too complicated, potentially buggy, code.

4.3 Documentation Comments

In the .net framework, Microsoft has introduced a documentation generation system based on XML comments. These comments are formally single line C# comments containing XML tags. They follow this pattern for single line comments:


/// <summary>
/// This class...
/// </summary>

Multiline XML comments follow this pattern:


/// <exception cref=”BogusException”>
/// This exception gets thrown as soon as a
/// Bogus flag gets set.
/// </exception>

All lines must be preceded by three slashes to be accepted as XML comment lines. Tags fall into two categories:

Documentation items Formatting/ Referencing

The first category contains tags like <summary>, <param> or <exception>. These represent items that represent the elements of a program's API which must be documented for the program to be useful to other programmers. These tags usually have attributes such as name or cref as demonstrated in the multiline example above. These attributes are checked by the compiler, so they should be valid. The latter category governs the layout of the documentation, using tags such as <code>, <list> or <para>.
Documentation can then be generated using the 'documentation' item in the #develop 'build' menu. The documentation generated is in HTMLHelp format.
For a fuller explanation of XML comments see the Microsoft .net framework SDK documentation. For information on commenting best practice and further issues related to commenting, see the TechNote 'The fine Art of Commenting'.

5. Declarations

5.1 Number of Declarations per Line

One declaration per line is recommended since it encourages commenting1. In other words,


int level; // indentation level
int size; // size of table

Do not put more than one variable or variables of different types on the same line when declaring them. Example:


int a, b; //What is 'a'? What does 'b' stand for?

The above example also demonstrates the drawbacks of non-obvious variable names. Be clear when naming variables.

5.2 Initialization

Try to initialize local variables as soon as they are declared. For example:

string name = myObject.Name;
or

int val = time.Hours;
Note: If you initialize a dialog try to use the using statement:

using (OpenFileDialog openFileDialog = new OpenFileDialog()) {
...
}

5.3 Class and Interface Declarations

When coding C# classes and interfaces, the following formatting rules should be followed:

No space between a method name and the parenthesis " (" starting its parameter list. The opening brace "{" appears in the next line after the declaration statement The closing brace "}" starts a line by itself indented to match its corresponding opening brace.

For example:


Class MySample : MyClass, IMyInterface
{
 int myInt;
 public MySample(int myInt)
 {
 this.myInt = myInt ;
 }
 void Inc()
 {
  ++myInt;
 }
 void EmptyMethod()
 {
 }
}

For a brace placement example look at section 10.1.

6. Statements

6.1 Simple Statements

Each line should contain only one statement.

6.2 Return Statements

A return statement should not use outer most parentheses. Don't use :


return (n * (n + 1) / 2);
use : return n * (n + 1) / 2;

6.3 If, if-else, if else-if else Statements

if, if-else and if else-if else statements should look like this:


if (condition) {
DoSomething();
...
}
if (condition) {
DoSomething();
...
} else {
DoSomethingOther();
...
}
if (condition) {
DoSomething();
...
} else if (condition) {
DoSomethingOther();
...
} else {
DoSomethingOtherAgain();
...
}

6.4 For / Foreach Statements

A for statement shoud have following form :

for (int i = 0; i < 5; ++i) {
...
}
or single lined (consider using a while statement instead) :

for (initialization; condition; update) ;
A foreach should look like :
foreach (int i in IntList) {
...
}
Note: Generally use brackets even if there is only one statement in the loop.

6.5 While/do-while Statements

A while statement should be written as follows:

while (condition) {
...
}

An empty while should have the following form:


while (condition) ;
A do-while statement should have the following form:

do {
...
} while (condition);

6.6 Switch Statements

A switch statement should be of following form:

switch (condition) {
case A:
...
break;
case B:
...
break;
default:
...
break;
}

6.7 Try-catch Statements

A try-catch statement should follow this form:


try {
...
} catch (Exception) {}
or
try {
...
} catch (Exception e) {
...
}
or
try {
...
} catch (Exception e) {
...
} finally {
...
}

7. White Space

7.1 Blank Lines

Blank lines improve readability. They set off blocks of code which are in themselves logically related. Two blank lines should always be used between:

Logical sections of a source file Class and interface definitions (try one class/interface per file to prevent this case) One blank line should always be used between: Methods Properties Local variables in a method and its first statement Logical sections inside a method to improve readability Note that blank lines must be indented as they would contain a statement this makes insertion in these lines much easier.

7.2 Inter-term spacing

There should be a single space after a comma or a semicolon, for example:

TestMethod(a, b, c); don't use : TestMethod(a,b,c)
or

TestMethod( a, b, c );
Single spaces surround operators (except unary operators like increment or logical not), example:
a = b; // don't use a=b;
for (int i = 0; i < 10; ++i) // don't use for (int i=0; i<10; ++i)
// or
// for(int i=0;i<10;++i)

7.3 Table like formatting

A logical block of lines should be formatted as a table:


string name = "Mr. Ed";
int myValue = 5;
Test aTest = Test.TestYou;

Use spaces for the table like formatting and not tabs because the table formatting may look strange in special tab intent levels.

8. Naming Conventions

8.1 Capitalization Styles

8.1.1 Pascal Casing

This convention capitalizes the first character of each word (as in TestCounter).

8.1.2 Camel Casing

This convention capitalizes the first character of each word except the first one. E.g. testCounter.

8.1.3 Upper case

Only use all upper case for identifiers if it consists of an abbreviation which is one or two characters long, identifiers of three or more characters should use Pascal Casing instead. For Example:


public class Math
{
public const PI = ...
public const E = ...
public const feigenBaumNumber = ...
}

8.2. Naming Guidelines

Generally the use of underscore characters inside names and naming according to the guidelines for Hungarian notation are considered bad practice.

Hungarian notation is a defined set of pre and postfixes which are applied to names to reflect the type of the variable. This style of naming was widely used in early Windows programming, but now is obsolete or at least should be considered deprecated. Using Hungarian notation is not allowed if you follow this guide.

And remember: a good variable name describes the semantic not the type.

An exception to this rule is GUI code. All fields and variable names that contain GUI elements like button should be postfixed with their type name without abbreviations. For example:


System.Windows.Forms.Button cancelButton;
System.Windows.Forms.TextBox nameTextBox;

8.2.1 Class Naming Guidelines

Class names must be nouns or noun phrases. UsePascal Casing see 8.1.1 Do not use any class prefix

8.2.2 Interface Naming Guidelines

Name interfaces with nouns or noun phrases or adjectives describing behavior. (Example IComponent or IEnumberable) Use Pascal Casing (see 8.1.1) Use I as prefix for the name, it is followed by a capital letter (first char of the interface name)

8.2.3 Enum Naming Guidelines

Use Pascal Casing for enum value names and enum type names Don’t prefix (or suffix) a enum type or enum values Use singular names for enums Use plural name for bit fields.

8.2.4 ReadOnly and Const Field Names

Name static fields with nouns, noun phrases or abbreviations for nouns Use Pascal Casing (see 8.1.1)

8.2.5 Parameter/non const field Names

Do use descriptive names, which should be enough to determine the variable meaning and it’s type. But prefer a name that’s based on the parameter’s meaning. Use Camel Casing (see 8.1.2)

8.2.6 Variable Names

Counting variables are preferably called i, j, k, l, m, n when used in 'trivial' counting loops. (see 10.2 for an example on more intelligent naming for global counters etc.) Use Camel Casing (see 8.1.2)

8.2.7 Method Names

Name methods with verbs or verb phrases. Use Pascal Casing (see 8.1.2)

8.2.8 Property Names

Name properties using nouns or noun phrases Use Pascal Casing (see 8.1.2) Consider naming a property with the same name as it’s type

8.2.9 Event Names

Name event handlers with the EventHandler suffix. Use two parameters named sender and e Use Pascal Casing (see 8.1.1) Name event argument classes with the EventArgs suffix. Name event names that have a concept of pre and post using the present and past tense. Consider naming events using a verb.

8.2.10 Capitalization summary

TypeCaseNotes
Class / StructPascal Casing 
InterfacePascal CasingStarts with I
Enum valuesPascal Casing 
Enum typePascal Casing 
EventsPascal Casing 
Exception classPascal CasingEnd with Exception
public FieldsPascal Casing 
MethodsPascal Casing 
NamespacePascal Casing 
PropertyPascal Casing 
Protected/private FieldsCamel Casing 
ParametersCamel Casing 

9. Programming Practices

9.1 Visibility

Do not make any instance or class variable public, make them private. For private members prefer not using “private” as modifier just do write nothing. Private is the default case and every C# programmer should be aware of it.

Use properties instead. You may use public static fields (or const) as an exception to this rule, but it should not be the rule.

9.2 No 'magic' Numbers

Don’t use magic numbers, i.e. place constant numerical values directly into the source code. Replacing these later on in case of changes (say, your application can now handle 3540 users instead of the 427 hardcoded into your code in 50 lines scattered troughout your 25000 LOC) is error-prone and unproductive. Instead declare a const variable which contains the number :


public class MyMath
{
public const double PI = 3.14159...
}

10. Code Examples

10.1 Brace placement example


namespace ShowMeTheBracket
{
public enum Test {
TestMe,
TestYou
}
public class TestMeClass
{
Test test;
public Test Test {
get {
return test;
}
set {
test = value;
}
}
void DoSomething()
{
if (test == Test.TestMe) {
//...stuff gets done
} else {
//...other stuff gets done
}
}
}
}
Brackets should begin on a new line only after: Namespace declarations (note that this isnew in version 0.3 and was different in 0.2) Class/ Interface / Struct declarations Method Declarations

10.2 Variable naming example

instead of :

for (int i = 1; i < num; ++i) {
meetsCriteria[i] = true;
}
for (int i = 2; i < num / 2; ++i) {
int j = i + i;
while (j <= num) {
meetsCriteria[j] = false;
j += i;
}
}
for (int i = 0; i < num; ++i) {
if (meetsCriteria[i]) {
Console.WriteLine(i + " meets criteria");
}
}
try intelligent naming :
for (int primeCandidate = 1; primeCandidate < num; ++primeCandidate)
{
isPrime[primeCandidate] = true;
}
for (int factor = 2; factor < num / 2; ++factor) {
int factorableNumber = factor + factor;
while (factorableNumber <= num) {
isPrime[factorableNumber] = false;
factorableNumber += factor;
}
}
for (int primeCandidate = 0; primeCandidate < num; ++primeCandidate)
{
if (isPrime[primeCandidate]) {
Console.WriteLine(primeCandidate + " is prime.");
}
}

Note: Indexer variables generally should be called i, j, k etc. But in cases like this, it may make sense to reconsider this rule. In general, when the same counters or indexers are reused, give them meaningful names.



相关文章推荐

python coding style guide 的快速落地实践

机器和人各有所长,如coding style检查这种可自动化的工作理应交给机器去完成,故发此文帮助你在几分钟内实现coding style的自动检查。...

PSR-2 (Coding Style Guide) 编码风格向导

原文地址:https://github.com/php-fig/fig-standards/blob/master/accepted/PSR-2-coding-style-guide.md 译文地址...
  • ZDX_Y
  • ZDX_Y
  • 2017年05月14日 23:53
  • 301

FreeRTOS学习笔记-1-Coding Standard and Style Guide(编码标准和风格)

编程标准 (Coding Standard) FreeRTOS 源代码遵守 MISRA (Motor Industry Software Reliability Association) 规范。 ...

Coding Style Guide

  • 2010年05月22日 18:12
  • 96KB
  • 下载

Coding Style Guide

  • 2013年01月16日 10:51
  • 456KB
  • 下载

KVC编程指南(Key-Value Coding Programming Guide)

概述 重要:这只是开发中API或技术的一个初步文档。苹果提供这些信息来帮助你在苹果产品上采用这些技术和编程界面。这些信息可能发生变化,根据这个文档实现的软件必须在最终的操作系统软件和最终的文档上测试。...

Coding in Style 无水印pdf

  • 2017年09月28日 12:24
  • 946KB
  • 下载

Coding in Style azw3

  • 2017年09月28日 12:17
  • 455KB
  • 下载

iOS安全编码指南 Secure Coding Guide -- 02 Types of Security Vulnerabilities 上

IOS安全编码指南 Secure Coding Guide -- 02 Types of Security Vulnerabilities 上 Most software security vu...

Verilog_coding_style_guidelines.pdf

  • 2009年06月11日 00:54
  • 69KB
  • 下载
内容举报
返回顶部
收藏助手
不良信息举报
您举报文章:C# Coding Style Guide
举报原因:
原因补充:

(最多只允许输入30个字)