DD+、E-AC-3 、EC3三个说的是同一种格式

最新推荐文章于 2023-10-18 11:40:04 发布

天天向上99

最新推荐文章于 2023-10-18 11:40:04 发布

阅读量1.1w

点赞数

本文链接：https://blog.csdn.net/charleslei/article/details/53101356

版权

E-AC-3 (Dolby Digital Plus) is an enhanced coding system based on the AC-3 codec.

It offers increased bitrates (up to 6.144 Mbit/s), support for more audio channels (up to 13.1), and improved coding techniques

(only at low data rates) to reduce compression artifacts, enabling lower data rates than those supported by AC-3

(e.g. 5.1-channel audio at 256 kbit/s). It is not backward compatible with existing AC-3 hardware, though E-AC-3 codecs generally

are capable of transcoding to AC-3 for equipment connected via S/PDIF. E-AC-3 decoders can also decode AC-3 bitstreams.

The fourth generation Apple TV supports E-AC-3.^[21] The discontinued HD DVD system directly supported E-AC-3.

Blu-ray Disc offers E-AC-3 as an option to graft added channels onto an otherwise 5.1 AC-3 stream,

as well as for delivery of secondary audio content (e.g. director's commentary) that is intended to be mixed with the primary

audio soundtrack in the Blu-ray Disc player.

摘自https://en.wikipedia.org/wiki/Dolby_Digital

混音完成后，通过此插件可以输出Dolby Digital（杜比数字，ac3格式），以及Dolby Digital Plus（杜比数字+，ec3格式）。也可以导入多声道的wav或aiff成品，直接输出5.1声道的ac3格式。

相关问题： ①由于该破解版插件目前尚处于内部测试版的状态，在Audition CC 2014中，无法调用该VST3插件及功能，不知是破解导致的问题还是软件自身的原因，总之原因不明。

②Premiere CC 2014版，本身也带了杜比数字和杜比数字+的编解码器，经多次实验，只能输出2.0，无法输出5.1。

准备工作

1、安装方法，参见《SurCode Dolby Digital 5.1 Encoder for adobe CC安装指南》

2、准备好5.1声道wav格式的音频素材，如果文件名很长，建议改短一些。

1、运行Audition CC 2014版，导入5.1 wav音频素材，本文拿做好的成品来示范；

2、按Ctrl+Shift+E，或“文件”->“导出”->“文件”，直接输出；

3、先输入文件名，再设定保存位置，然后，格式选，采样类型保持默认，按<确定>

注意： Audition CC 2014版，才有“杜比数字(*.ac3,*.ec3)”这个选项，2013版没有。

摘自http://www.wxphp.com/wxd_4so8m7at7j1x2cw44eaj_1.html

如何用SurCode Dolby Digital 5.1 Encoder生成AC3格式_图文

关注