发布时间：2007-10-16

把一个Ｎ久以前的scis硬盘+到了这台r6上

1.

# lsdev -Ccdisk
hdisk0 Available 10-60-00-4,0 16 Bit LVD SCSI Disk Drive
hdisk1 Available 10-60-00-0,0 Other SCSI Disk Drive
# lspv
hdisk0          0000788ff9375681                    rootvg          active
hdisk1          none                                None
2.

# chdev -l hdisk1 -a pv=yes
Method error (/etc/methods/chgdisk):
        0514-047 Cannot access a device.
     pv

3.

diag->Task Selection (Diagnostics, Advanced Diagnostics, Service Aids, etc.)->Format Media->hdisk1  

FORMAT MEDIA TASK                                                         802550

Device:  hdisk1 in location P1-Z1-A0

The format operation has stopped.
It is recommended that diagnostics be run on this disk drive.

To continue, press Enter.

4.diag->  Diagnostic Routines->hdisk1

TESTING COMPLETE on Tue Oct 16 17:01:09 CDT 2007                          801010

No trouble was found.

The resources tested were:

- hdisk1           P1-Z1-A0             Other SCSI Disk Drive

Use Enter to continue.
5.smitty lvm->volume groups-> Set Characteristics of a Volume Group->Add a Physical Volume to a Volume Group
Command: failed        stdout: yes           stderr: no

Before command completion, additional instructions may appear below.

0516-1182 extendvg Open Failure on hdisk1.
0516-792 extendvg: Unable to extend volume group.

重复３.４.５　so wrrong....　 dropped ,

maybe i needed a new disk....

发表于 @ 2008年01月15日 00:19:00|评论(loading...)|编辑