Fedora10安装与配置Samba

一、先说安装。如果没有安装samba软件包，先将它安装好，装上以下4个rpm包就行：

    samba-3.2.4-0.22.fc10.i386.rpm        

    samba-client-3.2.4-0.22.fc10.i386.rpm

    samba-common-3.2.4-0.22.fc10.i386.rpm 

    samba-winbind-3.2.4-0.22.fc10.i386.rpm

   这些rpm包在Fedora10的iso文件里都有的，不需要再下载。将虚拟机的光驱使用文件设为Fedora-10-i386-DVD.iso，然后挂载它。挂载后进入/media/Fedora 10 i386 DVD/Packages目录下进行rpm安装，在安装samba-3.2.4-0.22.fc10.i386.rpm 时可能会提示：

Error: Missing Dependency: perl(Convert::ASN1) is needed by package samba-3.0.33-3.7.el5.i386 (base)

    没关系，先rpm -ivh perl-Convert-ASN1-0.21-3.fc9.noarch.rpm，再安装就不会有问题了。也可以通过网络安装，Google一下有很多告诉怎么安装samba。

    装好后，service smb start启动samba服务。在运行级别为5的环境下，samba服务在系统启动默认是不开启的，要设为自启动，可以在终端下setup设置该服务即可，或在一些启动脚本里添加service smb start语句。

/*-----------------------------------------------------快速安装教程---------------------------------------------*/

1.安装Samba服务器

rpm -ivh samba-3.2.4-0.22.fc10.i386.rpm

2.添加用户并修改密码

useradd win

passwd win

3.设置该用户登录Samba服务器的密码

smbpasswd -a win

4.配置Samba服务器

vi /etc/samba/smb.conf

复制homes下6行 ---》6yy

改为[root]

comment=Root Directories

path=/

browseable=yes

writeable=yes

valid users=win  

5.重启Samba服务器

[

前提：

/etc/init.d/iptables stop

setenforce permissive

]

/etc/init.d/smb restart

/*------------------------------------------------------------------------------------------------------------------*/

二、编辑smb.conf文件

# cd /etc/samba/
# vi smb.conf

－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = workgroup            设置工作组，与windodws同组

# server string is the equivalent of the NT Description field
   server string = Samba Server     主机说明

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   printcap load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = cups

# This option tells cups that the data has already been rasterized
cups options = raw

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
 log file = /var/log/samba/%m.log
# all log information in one file
#   log file = /var/log/samba/smbd.log

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = share　　　用来设置共享模式，share是不进行安全登陆
# Use password server option only with security = server
;   password server =

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  password level = 8
;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
;  encrypt passwords = yes
;  smb passwd file = /etc/samba/smbpasswd

# The following are needed to allow password changing from Windows to
# update the Linux system password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
;  unix password sync = Yes
;  passwd program = /usr/bin/passwd %u
;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*suc
cessfully*

# Unix users can map to different SMB User names
;  username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#       a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path =  \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#       Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one  WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

#============================ Share Definitions ==============================
   idmap uid = 16777216-33554431
   idmap gid = 16777216-33554431
   template shell = /bin/false
   winbind use default domain = no
[homes]
   comment = Home Directories
   browseable = no
   writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /home/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /home/profiles
;    browseable = no
;    guest ok = yes

# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writable = no
   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   read only = yes
;   write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765
[webpage]　　　　　　　　　　　　　　　共享名称
comment=samba server　　　　　　　　   目录说明
path=/share　　　　　　　　　　　　　　共享目录
read only=no　　　　　　　　　　　　　　是否只读
public=yes　　　　　　　　　　　　　　　是否让所有的用户到这个参数
writable=yes　　　　　　　　　　　　　　是否可写入
create mode=0664　　　　　　　　　　　 目录的相关权限
directory mode=0775　　　　　　　　　　目录的相关权限

三、测试smb.conf设置

 

[root@LinuxServer samba]# testparm
Load smb config files from /etc/samba/smb.conf
Processing section "[homes]"
Processing section "[printers]"
Processing section "[test2]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions           ＜＝＝＝＝这里按enter

[global]
 server string = Samba Server Version %v
 security = SHARE
 passdb backend = tdbsam
 log file = /var/log/samba/log.%m
 max log size = 50
 hosts allow = 127., 192.168.1., 192.168.13.
 cups options = raw

[homes]
 comment = Home Directories
 read only = No

[printers]
 comment = All Printers
 path = /var/spool/samba
 printable = Yes
 browseable = No

[test2]
 comment = This is my samba ,344278520.
 path = /test2
 write list = yes
 read only = No
 create mask = 0664
 directory mask = 0777
 guest ok = Yes

四、启动samba

[root@LinuxServer samba]# /etc/rc.d/init.d/smb restart

[root@LinuxServer samba]# /etc/rc.d/init.d/nmb restart

或[root@LinuxServer samba]# /etc/init.d/smb start

[root@LinuxServer samba]# /etc/init.d/nmb start

或

[root@LinuxServer samba]# service smb start

[root@LinuxServer samba]# service nmb start

五、linux的防火墙设置把samba设置到允许状态或停掉防火墙。

六、这时在Windows运行中输入:\\192.168.0.82（虚拟机IP）后，双击共享文件夹根本打不开，还需要对linux进行以下设置：

       系统->管理->SELinux Manegement

      在弹出来的窗口中选择左边的“布尔值”选项，然后在右边查看以 samba 开头的选项，然后选中前4个便可，具体的内容该窗口的说明中已列出，就是一定要选择“allow samba to share any file/directory read/write” 和 “allow samba to share any file/directory read only”。