奥比中光Orbbec Astra Pro RGBD 3D视觉传感器在ROS（indigo和kinetic）使用说明 rgb depth同时显示

Orbbec Astra Pro传感器在ROS（indigo和kinetic）使用说明 rgb depth同时显示

这款摄像头使用uvc输入彩色信息，需要libuvc和libuvc_ros这样才能在ROS正常使用彩色功能。

请在下面网址，分别下载对应包：

1 https://github.com/ktossell

2 https://orbbec3d.com/develop/

也可以直接下载打包好的资源：

http://download.csdn.net/detail/zhangrelay/9705366

首先安装驱动，依据版本选择下载驱动中合适的版本：

依据下列文档说明进行安装：特别注意标出部分

#############Note################### 
# For user with ARM based development board: 
# With CPU Structure older than Cortex A17, use OpenNI-Linux-Arm-2.3 Nofilter.tar for better performance 
#################################### 
# There are two zip files, one is for 32bit machine, the other one is for 64bit 
# We choose 64bit(x64) and make the example as follows: 
这里应为系统是Ubuntu 16.04 64bit PC选择对应64bit版本 
# To run visual samples(e.g., SimpleViewer), you will need freeglut3 header and libaries, please install: 

$ sudo apt-get install build-essential freeglut3 freeglut3-dev 

#check udev version, Orbbec Driver need libudev.so.1, if can't find it, can make symbolic link from libudev.so.x.x, 
#which usually locate in /lib/x86_64-linux-gnu or /lib/i386-linux-gnu 

$ldconfig -p | grep libudev.so.1 
$cd /lib/x86_64-linux-gnu 
$sudo ln -s libudev.so.x.x.x libudev.so.1 
# copy tgz file to any place you want(e.g., Home) 
# unzip tgz file 

拷贝到对应文件夹并解压缩：

$ tar zxvf OpenNI-Linux-x64-2.2-0118.tgz 
$ cd OpenNI-Linux-x64-2.2

# run install.sh to generate OpenNIDevEnvironment, which contains OpenNI development environment  

$ sudo ./install.sh 
 
# please replug in the device for usb-register 
# add environment variables 

$ source OpenNIDevEnvironment 
# build sample(e.g., SimpleViewer) 
$ cd Samples/SimpleViewer 
$ make  
# run sample 
# connect sensor 
$ cd Bin/x64-Release 
$ ./SimpleViewer 

# now you should be able to see a GUI window showing the depth stream video 
# If the Debian Jessie Lite is used for testing, it may require the following installation for properly start the viewer.

$ sudo apt-get install libgl1-mesa-dri

安装完毕后，进行功能测试：

[html]  view plain  copy

 

 

1. ~/tools/OpenNI-Linux-x64-2.3/Samples/Bin$ ls  
2. ClosestPointViewer    MultiDepthViewer    org.openni.jar  
3. EventBasedRead        MultipleStreamRead  org.openni.Samples.SimpleViewer  
4. libMWClosestPoint.so  MWClosestPointApp   org.openni.Samples.SimpleViewer.jar  
5. libOpenNI2.jni.so     OpenNI2             SimpleRead  
6. libOpenNI2.so         OpenNI.ini          SimpleViewer  

使用./SimpleViewer和./ClosestPointViewer，注意传感器特性，深度视觉0.4-8.0米，如下：

安装ROS功能包，以kinetic为例，indigo类似：

[html]  view plain  copy

 

 

1. ~$ sudo apt-get install ros-kinetic-astra-camera ros-kinetic-astra-launch  

完毕后，使用：

[html]  view plain  copy

 

 

1. relaybotbox@relaybotbox-desktop:~$ roslaunch astra_launch   
2. astra.launch            device.launch           pointclouds.launch  
3. astra_tf_prefix.launch  ir.launch               processing.launch  
4. color.launch            kinect_frames.launch      
5. depth.launch            manager.launch            
6. relaybotbox@relaybotbox-desktop:~$ roslaunch astra_launch astra.launch   

工作正常的话可以看到：

[html]  view plain  copy

 

 

1. ~$ roslaunch astra_launch astra.launch   
2. ... logging to /home/relaybotbox/.ros/log/26bcfad8-bcf9-11e6-bc52-00e0b4159b09/roslaunch-relaybotbox-desktop-6834.log  
3. Checking log directory for disk usage. This may take awhile.  
4. Press Ctrl-C to interrupt  
5. Done checking log file disk usage. Usage is <1GB.  
6.   
7. started roslaunch server http://relaybotbox-desktop:33177/  
8.   
9. SUMMARY  
10. ========  
11.   
12. PARAMETERS  
13.  * /camera/camera_nodelet_manager/num_worker_threads: 4  
14.  * /camera/depth_rectify_depth/interpolation: 0  
15.  * /camera/driver/auto_exposure: True  
16.  * /camera/driver/auto_white_balance: True  
17.  * /camera/driver/color_depth_synchronization: False  
18.  * /camera/driver/depth_camera_info_url:   
19.  * /camera/driver/depth_frame_id: camera_depth_opti...  
20.  * /camera/driver/depth_registration: False  
21.  * /camera/driver/device_id: #1  
22.  * /camera/driver/rgb_camera_info_url:   
23.  * /camera/driver/rgb_frame_id: camera_rgb_optica...  
24.  * /rosdistro: kinetic  
25.  * /rosversion: 1.12.6  
26.   
27. NODES  
28.   /camera/  
29.     camera_nodelet_manager (nodelet/nodelet)  
30.     depth_metric (nodelet/nodelet)  
31.     depth_metric_rect (nodelet/nodelet)  
32.     depth_points (nodelet/nodelet)  
33.     depth_rectify_depth (nodelet/nodelet)  
34.     depth_registered_sw_metric_rect (nodelet/nodelet)  
35.     driver (nodelet/nodelet)  
36.     points_xyzrgb_sw_registered (nodelet/nodelet)  
37.     register_depth_rgb (nodelet/nodelet)  
38.     rgb_rectify_color (nodelet/nodelet)  
39.   /  
40.     camera_base_link (tf2_ros/static_transform_publisher)  
41.     camera_base_link1 (tf2_ros/static_transform_publisher)  
42.     camera_base_link2 (tf2_ros/static_transform_publisher)  
43.     camera_base_link3 (tf2_ros/static_transform_publisher)  
44.   
45. auto-starting new master  
46. process[master]: started with pid [6848]  
47. ROS_MASTER_URI=http://localhost:11311  
48.   
49. setting /run_id to 26bcfad8-bcf9-11e6-bc52-00e0b4159b09  
50. process[rosout-1]: started with pid [6861]  
51. started core service [/rosout]  
52. process[camera/camera_nodelet_manager-2]: started with pid [6864]  
53. process[camera/driver-3]: started with pid [6865]  
54. process[camera/rgb_rectify_color-4]: started with pid [6867]  
55. process[camera/depth_rectify_depth-5]: started with pid [6878]  
56. process[camera/depth_metric_rect-6]: started with pid [6896]  
57. process[camera/depth_metric-7]: started with pid [6912]  
58. process[camera/depth_points-8]: started with pid [6920]  
59. process[camera/register_depth_rgb-9]: started with pid [6938]  
60. process[camera/points_xyzrgb_sw_registered-10]: started with pid [6949]  
61. process[camera_base_link-12]: started with pid [6970]  
62. process[camera_base_link1-13]: started with pid [6986]  
63. process[camera_base_link2-14]: started with pid [6997]  
64. process[camera_base_link3-15]: started with pid [7008]  
65. [ INFO] [1481168899.738014182]: Initializing nodelet with 4 worker threads.  
66. [ INFO] [1481168900.562120390]: Device "2bc5/0403@2/5" found.  
67. Warning: USB events thread - failed to set priority. This might cause loss of data...  

使用rqt_image_view：

发现rgb并没有正确显示？？需要UVC支持。

编译libuvc过程如下：注意红色部分

`libuvc` is a cross-platform library for USB video devices, built atop `libusb`.
It enables fine-grained control over USB video devices exporting the standard USB Video Class
(UVC) interface, enabling developers to write drivers for previously unsupported devices,
or just access UVC devices in a generic fashion.

## Getting and Building libuvc

Prerequisites: You will need `libusb` and [CMake](http://www.cmake.org/) installed.

To build, you can just run these shell commands:

    Git clone https://github.com/ktossell/libuvc
    cd libuvc
    mkdir build
    cd build
    cmake ..
    make && sudo make install

and you're set! If you want to change the build configuration, you can edit `CMakeCache.txt`
in the build directory, or use a CMake GUI to make the desired changes.

## Developing with libuvc

The documentation for `libuvc` can currently be found at https://int80k.com/libuvc/doc/.

然后编译libuvc_ros：注意红色部分

`libuvc_camera` is a ROS driver that supports webcams and other UVC-standards-compliant video devices.
It's a cross-platform replacement for `uvc_camera`, a Linux-only webcam driver.

Documentation is available on the ROS wiki: [libuvc_camera](http://wiki.ros.org/libuvc_camera).

使用catkin_make，如果报错，注意libusb.h的位置。使用locate libusb.h，并将其放到合适位置：

~$ sudo cp /usr/include/libusb-1.0/libusb.h  /usr/local/include/libuvc/

修改下libuvc.h中include中的路径。

在启动roscore后，使用：

~$ rosrun libuvc_camera camera_node

查看rgb。

[html]  view plain  copy

 

 

1. ~$ rosrun libuvc_camera camera_node   
2. [ INFO] [1481169521.460856223]: Opening camera with vendor=0x0, product=0x0, serial="", index=0  
3. [ERROR] [1481169521.461465837]: Permission denied opening /dev/bus/usb/002/004  

出现报错，修改端口权限，重试。

[html]  view plain  copy

 

 

1. [ERROR] [1481169521.461465837]: Permission denied opening /dev/bus/usb/002/004  
2. relaybotbox@relaybotbox-desktop:~$ sudo chmod 777 /dev/bus/usb/002/004  
3. [sudo] relaybotbox 的密码：   
4. relaybotbox@relaybotbox-desktop:~$ rosrun libuvc_camera camera_node   
5. [ INFO] [1481169588.328108966]: Opening camera with vendor=0x0, product=0x0, serial="", index=0  
6. unsupported descriptor subtype: 13  
7. unsupported descriptor subtype: 13  
8. [ WARN] [1481169589.131025001]: Unable to set scanning_mode to 0  
9. [ WARN] [1481169589.132290563]: Unable to set auto_exposure to 8  
10. [ WARN] [1481169589.133330942]: Unable to set auto_exposure_priority to 0  
11. [ WARN] [1481169589.135009273]: Unable to set exposure_absolute to 1  
12. [ WARN] [1481169589.136271211]: Unable to set auto_focus to 1  
13. [ WARN] [1481169589.137170759]: Unable to set focus_absolute to 0  
14. [ WARN] [1481169589.138442322]: Unable to set gain to 0  
15. [ WARN] [1481169589.140162069]: Unable to set iris_absolute to 0  
16. [ WARN] [1481169589.141553880]: Unable to set pantilt to 0, 0  
17. [ INFO] [1481169589.273060465]: using default calibration URL  
18. [ INFO] [1481169589.273198871]: camera calibration URL: file:///home/relaybotbox/.ros/camera_info/camera.yaml  
19. [ INFO] [1481169589.273354822]: Unable to open camera calibration file [/home/relaybotbox/.ros/camera_info/camera.yaml]  
20. [ WARN] [1481169589.273418390]: Camera calibration file /home/relaybotbox/.ros/camera_info/camera.yaml not found.  

使用 rqt_image_view ，查看rgb如下：

同时使用也是可以的。

安装配置完毕，可以开始使用这款视觉传感器了。

上面的内容为转载内容，出处：http://blog.csdn.net/zhangrelay/article/details/53515859