关于加载驱动rtl8188EUS（8188eu.ko）到内核3.0.y出现段错误

最新推荐文章于 2023-02-13 21:50:54 发布
VIP文章 最新推荐文章于 2023-02-13 21:50:54 发布
阅读量2.7k 收藏
点赞数
分类专栏： 嵌入式 文章标签： arm
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/diandianyangyi/article/details/51859345
版权

1. 先看到段错误   rtw_ndev_notifier_call

fa0: c00231a0 c0061d78 be84af87 4022a008 4022a008 00122dba 017e2008 00000000
7fc0: be84af87 4022a008 017e2008 00000080 00000000 00000000 00000307 00000000
7fe0: 4019dcb4 be84ac6c 00020da0 4019dcc4 20000010 4022a008 2578303a 00000a78
Backtrace:
[<bf3a59b0>] (rtw_ndev_notifier_call+0x0/0x74 [8188eu]) from [<c027d3d8>] (register_netdevice_notifier+0x7c/0x19c)
 r5:bf40ccec r4:c045a19c
[<c027d35c>] (register_netdevice_notifier+0x0/0x19c) from [<bf3a5a38>] (rtw_ndev_notifier_register+0x14/0x1c [8188eu])
[<bf3a5a24>] (rtw_ndev_notifier_register+0x0/0x1c [8188eu]) from [<bf441074>] (rtw_drv_entry+0x74/0xe0 [8188eu])
[<bf441000>] (rtw_drv_entry+0x0/0xe0 [8188eu]) from [<c0022350>] (do_one_initcall+0x3c/0x18c)
 r4:c0410260 r3:c5906000
[<c0022314>] (do_one_initcall+0x0/0x18c) from [<c0061dfc>] (sy

最低0.47元/天 解锁文章
diandianyangyi
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
rtl8188eu.ko
01-03
安装前的准备工作 把rtl8188eu.ko拷贝到sd卡 方便起见 建议拷贝到启动用的fat分区 路径是/boot 安装方法 sudo install -c -m 0644 ./rtl8188eu.ko /lib/modules/3.2.27+/kernel/drivers/net/wireless sudo depmod -a sudo modprobe rtl8188eu
RTL8192EU驱动资料
04-08
RTL8192EU是一款USB双通道2.4G单频wifi方案，在视频传输领域有广泛应用
rtl8188eu.deb
12-22
这个是rtl8188eu的deb包。 直接dpkg -i后就可以了，然后insmod 8188eu.ko 就能上网了， 解决了该usb网卡的网络不稳定，易掉线，信号强度非常低等问题，
rtl8188eu驱动源码.zip
06-18
适用于Linux4.x版本的无线网卡芯片rtl8188eu的C语言驱动源码。包含驱动所需的头文件、源文件以及makefile、Kconfig文件。可以借助内核源码编译出.ko驱动文件，也可以通过修改代码后直接编译综合到内核文件中，使生成的内核文件可以驱动rtl8188无线网卡。
RTL8192EU驱动程序编译步骤
Turix附属空间[已停用]
11-24 2659
说明 出于学习的目的，需要在hi3518ev200平台上接入RTL8192无线网卡传输数据。本文记录自己对编译操作的步骤，以期望帮助到其它的初学者。 RTL8192介绍 嵌入式应用中可供选择的WIFI网络线片非常多，RTL系列只是众水中的一支，其它的例如XR819、AP6256.有些还将Wifi和蓝牙做在了一起。RTL系列中常见的型号有RTL8188、RTL8723、RTL8189、RTL8192...
rtl8188eu无线网卡驱动linux,关于rtl8188eu_Linux的驱动问题想请教一下
weixin_32666933的博客
05-01 194
该楼层疑似违规已被系统折叠隐藏此楼查看此楼[root@localhost rtl8188eu]# makemake ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/3.10.0-123.el7.x86_64/build M=/root/桌面/8188eu_USB_linux/driver/rtl8188eu modulesmake[1]: 进入目录“/u...
rtl8188linux内核配置,Embeded linux之RTL8188EU/RTL8188ETV使用
weixin_36364419的博客
05-03 516
一、kernel：3.18.20[*] Networking support --->-*- Wireless ---> cfg80211 - wireless configuration API[*] nl80211 testmode command[*] enable developer warnings[*] cfg80211 regulatory deb...
无线网卡（RTL8188EU）驱动编译、使用DHCP配置无线网络(1
jifengzhiling的博客
07-10 1万+
无线网卡（RTL8188EU）驱动编译、使用DHCP配置无线网络(1)http://www.openloongson.org/forum.php?mod=viewthread&amp;tid=220(出处: 龙芯俱乐部开源社区)1 驱动编译进入内核内核主界面下进入：（1）WIFI 设备支持配置及打开CONFIG_WIRELESS_EXT=y  CONFIG_WEXT_PRIV=yDevice Dr...
rtl驱动 ubuntu 禁用_Ubuntu下成功安装台式机网卡realtek的rtl8188eu芯片驱动并实现AP功能...
weixin_39849070的博客
12-21 326
1，下载驱动使用注意：2.编译安装$make$sudo make install3.关于hostapd的配置文件# Basic configurationinterface=wlan0ssid=11111channel=10#bridge=br0# WPA and WPA2 configurationmacaddr_acl=0auth_algs=1ignore_broadcast_ssid=0wp...
makefile运行时报错误1的一种解决办法
热门推荐
unxeer的博客
02-13 1万+
makefile 报 错误1
8188eu_sc3817r_sina33服务器验证通过_带rtl8188eu的驱动程序_20170619_1108没有外层目录.7z
06-21
使用sina33的SDK点亮SC3817R上面的rtl8188eu 大文实验室/大文哥 壹捌陆捌零陆捌捌陆捌贰 wb4916 AT qq.com 完成时间：2017/6/19 10:52 版本：V1.0 1、 W:\a33\rtl8188eu_sc3817r_sina33\android\device\softwinner\astar-y3\overlay\frameworks\base\core\res\res\values\config.xml （干掉BT部分） <!-- List of regexpressions describing the interface (if any) that represent tetherable bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this should be empty. --> <!-- default: disable Bluetooth PAN feature --> <string-array translatable="false" name="config_tether_bluetooth_regexs"> <item>"bt-pan"</item> </string-array> 2、 W:\a33\rtl8188eu_sc3817r_sina33\android\device\softwinner\astar-y3\astar_y3.mk （干掉BT部分） # wifi features PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml #frameworks/native/data/etc/android.hardware.bluetooth.xml:system/etc/permissions/android.hardware.bluetooth.xml \ #frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml 关闭BT+GMS+3G数据卡==： #rtl8723bs bt fw and config #$(call inherit-product, hardware/realtek/bluetooth/rtl8723bs/firmware/rtlbtfw_cfg.mk) # camera config for camera detector #PRODUCT_COPY_FILES += \ # device/softwinner/astar-y3/hawkview/sensor_list_cfg.ini:system/etc/hawkview/sensor_list_cfg.ini #add gms features #PRODUCT_COPY_FILES += \ # frameworks/native/data/etc/android.hardware.faketouch.xml:system/etc/permissions/android.hardware.faketouch.xml \ # frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ # frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml # 3G Data Card Packages #PRODUCT_PACKAGES += \ # u3gmonitor \ # chat \ # rild \ # pppd # 3G Data Card Configuration Flie #PRODUCT_COPY_FILES += \ # device/softwinner/polaris-common/rild/ip-down:system/etc/ppp/ip-down \ # device/softwinner/polaris-common/rild/ip-up:system/etc/ppp/ip-up \ # device/softwinner/polaris-common/rild/3g_dongle.cfg:system/etc/3g_dongle.cfg \ # device/softwinner/polaris-common/rild/usb_modeswitch:system/bin/usb_modeswitch \ # device/softwinner/polaris-common/rild/call-pppd:system/xbin/call-pppd \ # device/softwinner/polaris-common/rild/usb_modeswitch.sh:system/xbin/usb_modeswitch.sh \ # device/softwinner/polaris-common/rild/apns-conf_sdk.xml:system/etc/apns-conf.xml \ # device/softwinner/polaris-common/rild/libsoftwinner-ril.so:system/lib/libsoftwinner-ril.so #PRODUCT_COPY_FILES += \ # device/softwinner/polaris-common/rild/init.3gdongle.rc:root/init.sunxi.3gdongle.rc # 3G Data Card usb modeswitch File #PRODUCT_COPY_FILES += \ # $(call find-copy-subdir-files,*,device/softwinner/polaris-common/rild/usb_modeswitch.d,system/etc/usb_modeswitch.d) #PRODUCT_PACKAGES += Bluetooth #PRODUCT_PROPERTY_OVERRIDES += \ # ro.product.8723b_bt.used=true 支持adb shell PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage,adb \ ro.adb.secure=0 ro.udisk.lable=Polaris \ ro.font.scale=1.0 \ ro.hwa.force=false \ rw.logger=0 \ ro.sys.bootfast=true \ debug.hwc.showfps=0 \ debug.hwui.render_dirty_regions=false #ro.sys.storage_type = emulated \ #for gms #PRODUCT_PROPERTY_OVERRIDES += \ # ro.sys.mutedrm=true \ # ro.adb.secure=1 1280x800的分辨率需要修改这里：213 PRODUCT_PROPERTY_OVERRIDES += \ ro.sf.lcd_density=213 \ ro.product.firmware=v2.0 关闭GMS： #include device/softwinner/polaris-common/prebuild/google/products/gms_base.mk 3、 W:\a33\rtl8188eu_sc3817r_sina33\android\device\softwinner\astar-y3\BoardConfig.mk # 2. Bluetooth Configuration # make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor #BOARD_HAVE_BLUETOOTH := true #BOARD_HAVE_BLUETOOTH_BCM := true #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6210 #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6330 #BOARD_HAVE_BLUETOOTH_RTK := true #BLUETOOTH_HCI_USE_RTK_H5 := true #SW_BOARD_HAVE_BLUETOOTH_NAME := rtl8723bs 4、 W:\a33\rtl8188eu_sc3817r_sina33\android\device\softwinner\astar-y3\init.sun8i.rc ## bluetooth # # UART device # chmod 0660 /dev/ttyS1 # chown bluetooth net_bt_stack /dev/ttyS1 # # # power up/down interface # chmod 0660 /sys/class/rfkill/rfkill0/state # chmod 0660 /sys/class/rfkill/rfkill0/type # chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/state # chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/type # write /sys/class/rfkill/rfkill0/state 0 # # # bluetooth LPM # chmod 0220 /proc/bluetooth/sleep/lpm # chmod 0220 /proc/bluetooth/sleep/btwrite # chown bluetooth net_bt_stack /proc/bluetooth/sleep/lpm # chown bluetooth net_bt_stack /proc/bluetooth/sleep/btwrite # write /proc/bluetooth/sleep/lpm 1 #2G or 3G init.rc # import init.sunxi.3gdongle.rc 5、 W:\a33\rtl8188eu_sc3817r_sina33\android\frameworks\base\packages\SettingsProvider\res\values\defaults.xml <integer name="def_screen_off_timeout">60000</integer> <bool name="def_lockscreen_disabled">true</bool> 6、 W:\a33\rtl8188eu_sc3817r_sina33\lichee\tools\pack\chips\sun8iw5p1\configs\default\env.cfg bootdelay=3 loglevel=8 7、 W:\a33\rtl8188eu_sc3817r_sina33\lichee\tools\pack\chips\sun8iw5p1\configs\y3\sys_config.fex ;wakeup_src_bt = port:PL09<4><default><default><0> ;---------------------------------------------------------------------------------- ;capacitor tp configuration ;ctp_twi_id : twi controller ID ;ctp_twi_addr : I2C slave address, 7bit ;ctp_screen_max_x/_y : resolution of touch panel ;ctp_revert_x/_y_flag : whether need to revert x/y ;ctp_exchange_x_y_flag: whether need to exchange the value of x and y ;ctp_int_port : port for tp's interrupt signal ;ctp_wakeup : port for wakeup tp ;---------------------------------------------------------------------------------- [ctp_para] ctp_used = 1 ctp_name = "gt82x" ctp_twi_id = 0 ctp_twi_addr = 0x5d ctp_screen_max_x = 1280 ctp_screen_max_y = 800 ctp_revert_x_flag = 1 ctp_revert_y_flag = 1 ctp_exchange_x_y_flag = 1 ctp_int_port = port:PL04<4><default><default><default> ctp_wakeup = port:PL03<1><default><default><1> ctp_power_ldo = ctp_power_ldo_vol = ctp_power_io = ;---------------------------------------------------------------------------------- ;lcd0 configuration ;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp; 6:extend dsi ;lcd_x: lcd horizontal resolution ;lcd_y: lcd vertical resolution ;lcd_width: width of lcd in mm ;lcd_height: height of lcd in mm ;lcd_dclk_freq: in MHZ unit ;lcd_pwm_freq: in HZ unit ;lcd_pwm_pol: lcd backlight PWM polarity ;lcd_pwm_max_limit lcd backlight PWM max limit(<=255) ;lcd_hbp: hsync back porch ;lcd_ht: hsync total cycle ;lcd_vbp: vsync back porch ;lcd_vt: vysnc total cycle ;lcd_hspw: hsync plus width ;lcd_vspw: vysnc plus width ;lcd_lvds_if: 0:single link; 1:dual link ;lcd_lvds_colordepth: 0:8bit; 1:6bit ;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode ;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither ;lcd_io_phase: 0:noraml; 1:intert phase(0~3bit: vsync phase; 4~7bit:hsync phase; ; 8~11bit:dclk phase; 12~15bit:de phase) ;lcd_gamma_en lcd gamma correction enable ;lcd_bright_curve_en lcd bright curve correction enable ;lcd_cmap_en lcd color map function enable ;deu_mode 0:smoll lcd screen; 1:large lcd screen(larger than 10inch) ;lcdgamma4iep: Smart Backlight parameter, lcd gamma vale * 10; ; decrease it while lcd is not bright enough; increase while lcd is too bright ;smart_color 90:normal lcd screen 65:retina lcd screen(9.7inch) ;---------------------------------------------------------------------------------- [lcd0_para] lcd_used = 1 lcd_driver_name = "default_lcd" lcd_if = 3 lcd_x = 1280 lcd_y = 800 lcd_width = 150 lcd_height = 94 lcd_dclk_freq = 71 lcd_pwm_used = 1 lcd_pwm_ch = 0 lcd_pwm_freq = 50000 lcd_pwm_pol = 1 lcd_hbp = 20 lcd_ht = 1418 lcd_hspw = 10 lcd_vbp = 10 lcd_vt = 830 lcd_vspw = 5 lcd_lvds_if = 0 lcd_lvds_colordepth = 1 lcd_lvds_mode = 0 lcd_frm = 1 lcd_gamma_en = 0 lcd_bright_curve_en = 0 lcd_cmap_en = 0 deu_mode = 0 lcdgamma4iep = 22 smart_color = 90 lcd_bl_en = port:PD13<1><0><default><1> lcd_power = "axp22_dc1sw" lcdd0 = port:PD18<3><0><default><default> lcdd1 = port:PD19<3><0><default><default> lcdd2 = port:PD20<3><0><default><default> lcdd3 = port:PD21<3><0><default><default> lcdd4 = port:PD22<3><0><default><default> lcdd5 = port:PD23<3><0><default><default> lcdd6 = port:PD24<3><0><default><default> lcdd7 = port:PD25<3><0><default><default> lcdd8 = port:PD26<3><0><default><default> lcdd9 = port:PD27<3><0><default><default> ;---------------------------------------------------------------------------------- ;pwm config ;---------------------------------------------------------------------------------- [pwm0_para] pwm_used = 0 pwm_positive = port:PH00<2><0><default><default> [pwm1_para] pwm_used = 1 pwm_positive = port:PH01<2><0><default><default> ;---------------------------------------------------------------------------------- ;usb configuration ;usb_used: usb controller enable, 0-disable, 1-enable ;usb_port_type: usb mode: 0-device, 1-host, 2-otg ;usb_detect_type: usb hotplug detect mode, 0-none, 1-vbus/id detect, 2-id/dpdm detect ;usb_id_gpio: usb id detect IO ;usb_det_vbus_gpio: usb vbus detect IO, "axp_ctrl" for axp ;usb_drv_vbus_gpio: usb dirve vbus IO ;usb_restrict_gpio: usb current restrict IO ;usb_restric_flag: usb current restrict flag ;---------------------------------------------------------------------------------- [usbc0] usb_used = 1 usb_port_type = 0 usb_detect_type = 1 usb_id_gpio = port:PD10<0><1><default><default> usb_det_vbus_gpio = "axp_ctrl" usb_drv_vbus_gpio = port:power4<1><0><default><0> usb_restrict_gpio = usb_host_init_state = 0 usb_restric_flag = 0 usb_restric_voltage = 3550000 usb_restric_capacity= 5 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_regulator_id_vbus = "axp22_dcdc1" usb_regulator_id_vbus_vol = 3000000 [usbc1] usb_used = 1 usb_port_type = 1 usb_detect_type = 0 usb_id_gpio = usb_drv_vbus_gpio = port:PD12<1><0><default><0> usb_restrict_gpio = usb_host_init_state = 0 usb_restric_flag = 0 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_not_suspend = 0 ;-------------------------------------------------------------------------------- ;blue tooth ;bt_used ---- blue tooth used (0- no used, 1- used) ;bt_uard_id ---- uart index ;-------------------------------------------------------------------------------- [bt_para] bt_used = 0 bt_uart_id = 1
set_include_path和get_include_path使用及注意事项
10-27
set_include_path 设置默认包含路径,本文将介绍下其的使用方法，及注意事项，感兴趣的朋友可以了解下，或许对你学习php有所帮助
RTL8188无线网卡驱动 Realtek RTL8188CE windows驱动软件.zip
04-22
RTL8188无线网卡驱动 Realtek RTL8188CE windows驱动软件
rtl8188EUS_linux_v5.2.2.4_25483.20171222.tar.gz_20171222_RTL8188
07-14
RTL8188EUS Linux 驱动：rtl8188EUS_linux_v5.2.2.4_25483.20171222
RTL8188EUS_LINUX驱动.rar
06-05
RTL8188EUS_LINUX驱动.rar
RTL8188EUS_RTL8189ES.zip_8188eus for linux_RTL8188EUS_RTL8188EUS
07-14
RTL8188EUS linux 驱动 for linux4.1
mt7601驱动加载
diandianyangyi的专栏
11-14 1万+
使用了 ralink 的 mt7601 芯片，默认情况下生成的驱动有三个： a.     mt7601Usta.ko b.     mtnet7601Usta.ko c.     mtutil7601Usta.ko 这里的加载顺序要按照 c -> a -> b 的顺序进行，否则 会出现  Unknown symbol rausb_buffer_free 等等一大类似信息。
mt7601驱动使用（三）
diandianyangyi的专栏
09-11 1万+
使用一个驱动，也大费周折。闲话不说，直接
mt7601驱动使用（二）
diandianyangyi的专栏
09-04 1万+
想不到事隔半年后，又碰到项目中使用了驱动mt7601
能否提供支持linux5.4.61内核的rtl8188eus的驱动代码
最新发布
07-20
一些常见的 rtl8188eus 驱动项目包括 "rtl8188eus"、"rtl8188eu" 和 "rtl8188eus_linux"。 请注意，在使用开源驱动代码时，确保仔细阅读项目的文档和说明，按照指示进行安装和编译。如果需要，您还可以参考项目的 ...

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值