全志A33 fastboot模式探秘

调试信息输出


device 18D1:4E40 opened
success: set configuration #1
success: claim_interface #0
success: bulk write 64 bytes
success: bulk read 7 bytes
success: bulk read content is:OKAY0.5
Done.




源代码
编译环境
上位机:
Microsoft Visual Studio Ultimate 2013
下位机:
全志A33小板
进入fastboot模式
bootloader状态下输入:fastboot_test命令


bootloader要修改下vid和pid  18D1:4E40




#include <stdio.h> 
#include <string.h> 
#include <iostream>
#include "conio.h"
#include "lusb0_usb.h"
//加入库文件libusb.lib




#define m_dev_VENDOR    0x18d1        /* Vendor ID of the m_dev         */ 
#define m_dev_PRODUCT   0x4e40        /* Product ID of the m_dev        */ 
#define m_dev_DATA_SIZE 4       /* Number of bytes to get at once */ 


//OnBnClickedButton10






#define printf TRACE


/
//以下为官方的测试程序










#include <stdio.h>


// Enables this example to work with a device running the
// libusb-win32 PIC Benchmark Firmware.
//#define BENCHMARK_DEVICE


//
// TEST SETUP (User configurable)


// Issues a Set configuration request
#define TEST_SET_CONFIGURATION


// Issues a claim interface request
#define TEST_CLAIM_INTERFACE


// Use the libusb-win32 async transfer functions. see
// transfer_bulk_async() below.
#define TEST_ASYNC


// Attempts one bulk read.
#define TEST_BULK_READ


// Attempts one bulk write.
#define TEST_BULK_WRITE


//
// DEVICE SETUP (User configurable)


// Device vendor and product id.
#define MY_VID 0x18d1
#define MY_PID 0x4e40












// Device configuration and interface id.
#define MY_CONFIG 1
#define MY_INTF 0


// Device endpoint(s)
#define EP_IN 0x81
#define EP_OUT 0x02


//Device of bytes to transfer.
#define BUF_SIZE 64


//
usb_dev_handle *open_dev(void);


static int transfer_bulk_async(usb_dev_handle *dev,
                               int ep,
                               char *bytes,
                               int size,
                               int timeout);


usb_dev_handle *open_dev(void)
{
    struct usb_bus *bus;
    struct usb_device *dev;


    for (bus = usb_get_busses(); bus; bus = bus->next)
    {
        for (dev = bus->devices; dev; dev = dev->next)
        {
            if (dev->descriptor.idVendor == MY_VID
                    && dev->descriptor.idProduct == MY_PID)
            {
                return usb_open(dev);
            }
        }
    }
    return NULL;
}








int testusb_main(void)
{
    usb_dev_handle *dev = NULL; 
    //the device handle
    char tmp[BUF_SIZE];
    int ret;
    void* async_read_context = NULL;
    void* async_write_context = NULL;




    char * fastboot_cmd = "getvar:version";
    memset( tmp, 0x00, sizeof(tmp) );
    memcpy( tmp, fastboot_cmd, strlen(fastboot_cmd) );        
            
    //好戏开幕......
    usb_init(); 
    //initialize the library
    usb_find_busses(); 
    //find all busses
    usb_find_devices(); 
    //find all connected devices
                                    
    if( !(dev = open_dev()) ){
        printf("error opening device: %s\n", usb_strerror());
        return 0;
    }else{
        printf("success: device %04X:%04X opened\n", MY_VID, MY_PID);
    }
    


                      
    #ifdef TEST_SET_CONFIGURATION
    if( usb_set_configuration(dev, MY_CONFIG) < 0 ){
        printf("error setting config #%d: %s\n", MY_CONFIG, usb_strerror());
        usb_close(dev);
        return 0;
    }else{
        printf("success: set configuration #%d\n", MY_CONFIG);
    }
    #endif


    #ifdef TEST_CLAIM_INTERFACE
    if( usb_claim_interface(dev, 0) < 0 ){
        printf("error claiming interface #%d:\n%s\n", MY_INTF, usb_strerror());
        usb_close(dev);
        return 0;
    }else{
        printf("success: claim_interface #%d\n", MY_INTF);
    }
    #endif
    
    //高潮                                                                       
    #ifdef TEST_BULK_WRITE
    #ifdef BENCHMARK_DEVICE
    ret = usb_control_msg( dev, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_IN,
                           14, /* set/get test */
                           2,  /* test type    */
                           MY_INTF,  /* interface id */
                           tmp, 1, 1000 );
    #endif
                      
    #ifdef TEST_ASYNC                       
    // Running an async write test
    ret = transfer_bulk_async(dev, EP_OUT, tmp, sizeof(tmp), 5000);
    #else
    // Running a sync write test
    ret = usb_bulk_write(dev, EP_OUT, tmp, sizeof(tmp), 5000);
    #endif
    if( ret < 0 ){
        printf("error writing:\n%s\n", usb_strerror());
    }else{
        printf("success: bulk write %d bytes\n", ret);
    }
    #endif
    //end of #def TEST_BULK_WRITE
                 
    #ifdef TEST_BULK_READ
    #ifdef BENCHMARK_DEVICE
    ret = usb_control_msg( dev, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_IN,
                           14, // set/get test              
                           1,  // test type
                           MY_INTF,  //interface id
                           tmp, 1, 1000 );
    #endif
    
    #ifdef TEST_ASYNC
    // Running an async read test
    ret = transfer_bulk_async(dev, EP_IN, tmp, sizeof(tmp), 5000);
    #else
    // Running a sync read test
    ret = usb_bulk_read(dev, EP_IN, tmp, sizeof(tmp), 5000);
    #endif
    if( ret < 0 ){
        printf("error reading:\n%s\n", usb_strerror());
    }else{
        printf("success: bulk read %d bytes\n", ret);
        tmp[ret] = '\0';
        printf( "success: bulk read content is:%s\n", tmp );
    }
    #endif




    //收尾工作,清场
    #ifdef TEST_CLAIM_INTERFACE
    usb_release_interface(dev, 0);
    #endif


    if( dev ){
        usb_close(dev);
    }
    printf("Done.\n");
    return 0;
}








/*
* Read/Write using async transfer functions.
*
* NOTE: This function waits for the transfer to complete essentially making
* it a sync transfer function so it only serves as an example of how one might
* implement async transfers into thier own code.
*/
static int transfer_bulk_async(usb_dev_handle *dev,
                               int ep,
                               char *bytes,
                               int size,
                               int timeout)
{
    // Each async transfer requires it's own context. A transfer
    // context can be re-used.  When no longer needed they must be
    // freed with usb_free_async().
    //
    void* async_context = NULL;
    int ret;


    // Setup the async transfer.  This only needs to be done once
    // for multiple submit/reaps. (more below)
    //
    ret = usb_bulk_setup_async(dev, &async_context, ep);
    if (ret < 0)
    {
        printf("error usb_bulk_setup_async:\n%s\n", usb_strerror());
        goto Done;
    }


    // Submit this transfer.  This function returns immediately and the
    // transfer is on it's way to the device.
    //
    ret = usb_submit_async(async_context, bytes, size);
    if (ret < 0)
    {
        printf("error usb_submit_async:\n%s\n", usb_strerror());
        usb_free_async(&async_context);
        goto Done;
    }


    // Wait for the transfer to complete.  If it doesn't complete in the
    // specified time it is cancelled.  see also usb_reap_async_nocancel().
    //
    ret = usb_reap_async(async_context, timeout);


    // Free the context.
    usb_free_async(&async_context);


Done:
    return ret;
}








//以上为官方的测试程序
//