centos fedora nfs kermit tftp 配置

tftp服务器：

1.yum install tftp tftpd(tftp-server) xinetd
2.关闭防火墙和selinux:
selinux: vim /etc/selinux/config(/etc/sysconfig/selinux)-->SELINUX=disabled
bash$ setenforce=0
查看getenforce
iptables:1)      

 重启后永久性生效：  关闭：chkconfig iptables off

临时关闭：

service iptables stop(/etc/init.d/iptables stop)

查看：service iptables status

3.配置

tftp:
vim /etc/xinetd.d/tftp
service tftp
{
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -s -c /tftpboot
disable = no
per_source = 11
cps = 100 2
flags = IPv4
}
4.重启动服务端
service xinetd restart(/etc/init.d/xinetd restart)
5.添加权限:    chmod 777 -R /tftpboot
6.测试 tftp 127.0.0.1
get put

配置nfs服务
1.下载安装 yum install portmap nfs-utils
（有的发行版安装包不同比如yum install nfs-kernel-server）

2.vim /etc/exports
添加
$PATH(要挂载的路径) *(rw,sync,no_root_squash)
3.chmod 777 $PATH
4.配置开机启动及启动nfs-server
# systemctl enable nfs-server.service
5.nfs-server检查是否开启
# systemctl is-enabled nfs-server.service
6.手动开启
service rpcbind start
service nfs(nfs-kernel-server) start
7.检测挂载：
mount localhost:$PATH
8:该过程也要关闭
iptables 和selinux

配置ckermit
1.下载安装
yum install ckermit
2.vim /etc/kermrc
输入
set line          /dev/ttyS0
set speed         115200
set carrier-watch off
set handshake     none
set flow-control none
robust
set file type     bin
set file name     lit
set rec pack      1000
set send pack     1000
set window        5
为保险起见复制到
/root/.kermrc   /home/(用户)/.kermrc /etc/kermit/kermrc
3.chmod 777 /dev/ttyS0