设备驱动中环形缓冲区数据存储和读写同步的实现

最新推荐文章于 2024-03-28 17:24:13 发布

dreamtofly

最新推荐文章于 2024-03-28 17:24:13 发布

阅读量1.5k

点赞数

分类专栏： GTK 文章标签：存储 buffer asynchronous struct 数据结构 signal

GTK 专栏收录该内容

3 篇文章 0 订阅

订阅专栏

首先通过自定义数据结构，对缓冲区做几个基本的指针和参数进行定义：

char * buffer_start, *buffer_end 指向buffer起始端和结束端的指针

char *wp ,*rp 数据的读写指针

int buffersize buffer大小

调用内存分配函数kmalloc函数，为该数据结构申请内存空间，初始化结束后，数据的读写指针都指向char *buffer_star，对于缓冲区，我们可以做一下几个rules:

1. *wp = *rp ：这个数据缓冲区是空的。对于读操作，遇到这种情况读操作应该会被阻塞，无数据可读，读进程进入睡眠等待状态；对于写操作，写睡眠将被唤醒，可写入的大小为整个buffer空间的大小

2. *wp > *rp ：缓冲区有数据可读，可读大小为wp-rp，读进程不会不会被阻塞，而wp-rp=buffersize时，写进程被阻塞进入睡眠，若wp-rp<buffersize时，写进程不会被阻塞，buffer还有空间可以写入

3. *wp< *rp：如果wp rp指向buffer_end的时候，会自动反转到buffer_start位置，可写空间为rp-wp-1

通过阻塞和睡眠机制，我们可以实现对这个buffer的读写的同步，下面还是以代码的方式讲解一下读写同步的原理：

static ssize_t scull_p_read (struct file *filp, char __user *buf, size_t count,
loff_t *f_pos)
{
struct scull_pipe *dev = filp->private_data;

if (down_interruptible(&dev->sem)) 锁定信号量
return -ERESTARTSYS;

while (dev->rp == dev->wp) { /* nothing to read */                      此时缓冲区为空，无数据可读
  up(&dev->sem); /* release the lock */                                         /*解锁信号量，注意：必须在进入阻塞睡眠之前解锁信号量，准备进入睡眠*/
  if (filp->f_flags & O_NONBLOCK)
   return -EAGAIN;
  PDEBUG("/"%s/" reading: going to sleep/n", current->comm);
  if (wait_event_interruptible(dev->inq, (dev->rp != dev->wp)))     /* 阻塞，进入睡眠，当dev->rp != dev->wp这个条件被满足的时候，唤醒睡眠，这个睡眠应该   在写操作中被唤醒*/
   return -ERESTARTSYS; /* signal: tell the fs layer to handle it */
  /* otherwise loop, but first reacquire the lock */
  if (down_interruptible(&dev->sem))                                         /* 如果被唤醒，则重新锁定信号量，进行数据读取*/
   return -ERESTARTSYS;
}
/* ok, data is there, return something */
if (dev->wp > dev->rp)
  count = min(count, (size_t)(dev->wp - dev->rp));
else /* the write pointer has wrapped, return data up to dev->end */
  count = min(count, (size_t)(dev->end - dev->rp));
if (copy_to_user(buf, dev->rp, count)) {   /*i在rp>wp情况下，本次操作不能一次性读取buffer里面所有的数据*/
  up (&dev->sem);                                        /*必须分两次读取，第一次只读到end-rp,第二次读到wp-start*/
  return -EFAULT;
}
dev->rp += count;                               /*count值已经被处理过，保证dev->rp += count不会超过buffer_end*/

if (dev->rp == dev->end)
dev->rp = dev->buffer; /* wrapped */
up (&dev->sem);

/* finally, awake any writers and return */
wake_up_interruptible(&dev->outq); /*读取结束后完成指针的更新，唤醒写睡眠*/
PDEBUG("/"%s/" did read %li bytes/n",current->comm, (long)count);
return count;
}

static ssize_t scull_p_write(struct file *filp, const char __user *buf, size_t count,
loff_t *f_pos)
{
struct scull_pipe *dev = filp->private_data;
int result;

if (down_interruptible(&dev->sem))
return -ERESTARTSYS;

/* Make sure there's space to write */
result = scull_getwritespace(dev, filp); /*测试是否还有可写入的空间*/
if (result)
return result; /* scull_getwritespace called up(&dev->sem) */

/* ok, space is there, accept something */
count = min(count, (size_t)spacefree(dev));                /*如果有，察看还有多少空间可写*/
if (dev->wp >= dev->rp)
  count = min(count, (size_t)(dev->end - dev->wp)); /* to end-of-buf */ /*似乎还有一小段空间没有写入*/
else /* the write pointer has wrapped, fill up to rp-1 */
  count = min(count, (size_t)(dev->rp - dev->wp - 1));
PDEBUG("Going to accept %li bytes to %p from %p/n", (long)count, dev->wp, buf);
if (copy_from_user(dev->wp, buf, count)) {
  up (&dev->sem);
  return -EFAULT;
}
dev->wp += count;
if (dev->wp == dev->end)
  dev->wp = dev->buffer; /* wrapped */                     /*更新写指针*/
up(&dev->sem);

/* finally, awake any reader */
wake_up_interruptible(&dev->inq); /*写完之后必定有数据可读，唤醒读睡眠*/

/* and signal asynchronous readers, explained late in chapter 5 */
if (dev->async_queue)
kill_fasync(&dev->async_queue, SIGIO, POLL_IN);
PDEBUG("/"%s/" did write %li bytes/n",current->comm, (long)count);
return count;
}