Event ID: 30013 The DHCP allocator has disabled itself

原创 2005年02月28日 02:29:00

Event ID: 30013Sourceipnathlp TypeError DescriptionThe DHCP allocator has disabled itself on IP address 169.254.236.250, since the IP address is outside the 192.168.0.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, please change the scope to include the IP address, or change the IP address to fall within the scope. Things to understandWhat is DHCP?
What is a DHCP Lease?  
CommentsIonut Marin (Last update 1/3/2005):
From a newsgroup post: "I was having problems running ICS (Internet Connection Sharing) on my Win2K Pro. Whenever a Win98 client on the network tried to browse the web, I got an error event 31003. I resolved this problem by removing the ZoneAlarm software from my Win2k machine".

From a newsgroup post: "Make sure no DHCP service is running on your machines. ICS contains its own addressing solution and it sounds like this is conflicting with the DHCP client service".

From a newsgroup post: "I had this problem with Windows XP. Microsoft online support suggested checking all network connections in "My Network Places" and disabling any sharing of internet connections. I found one item which had this and I unchecked the internet sharing box. The error has not yet recurred".

See the link to "Microsoft event 30013 from source ipnathlp" for additional information on this event.

Adrian Grigorof
169.254.x.x is the ip subnet that Windodws 2000 DHCP Client assigns to a machine when it cannot contact a DHCP server. The 192.168.0.0 is the range used by the Internet Connection Sharing service. So this event appears to be a conflict between these two components.  
LinksMicrosoft event 30013 from source ipnathlp  



































Microsoft event 30013 from source ipnathlp

DetailsProduct:Windows Operating SystemID:30013Source:ipnathlpVersion:5.2Symbolic Name:IP_AUTO_DHCP_LOG_NON_SCOPE_ADDRESSMessage:The DHCP allocator has disabled itself on IP address %1, since the IP address is outside the %2/%3 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, please change the scope to include the IP address, or change the IP address to fall within the scope.   Explanation

The IP address is not within the scope of addresses allocated for Internet Connection Sharing (ICS) or Routing and Remote Access network address translation (NAT).

The most probable cause is incorrect manual configuration of the IP address.

   User Action

To automatically reconfigure the IP address, disable and then re-enable either ICS or the Routing and Remote Access NAT component.

To disable and re-enable ICS

In Windows Explorer, click My Network Places. Right-click the ICS adapter that you want to share, and then select Properties. Click the Advanced tab. In the Internet Connection sharing area, clear the Allow other network users to connect through this computer's internet connection box, and then click OK. In the Network Connections window, right-click the ICS adapter, and then select Properties. Click the Advanced tab. Select the Allow other network users to connect through this computer's internet connection box, and then click OK.

You can disable and then re-enable the Routing and Remote Access NAT component by opening Routing and Remote Access in Administrative Tools.











www.eventid.net, 真是一个好网站来

基本上,看了上面的评论, 再看了Microsoft event 30013 from source ipnathlp,知道这是我的NAT DHCP分配器与接口冲突, 系统APIPA和NAT的DHCP冲突. 重新配置了NAT就行了,不再出现此错误信息.
因为我用的时VMware软件, 当没有上虚拟机时, 那个接口也一直在运行,即不是叉叉的. 所以重新配置接口时,最好有一台虚拟机在运行着.

2005.3.7,lem:对于NAT不能向接口分配IP地址,则重新启动RRAS服务即可.

Linux内核挂载根文件系统出现INIT:Id "S" respawning too fast: disabled for 5 minutes的解决方法

原创作品,转载时请务必以超链接形式标明文章原始出处:http://blog.csdn.net/gqb666/article/details/8260018 一、   问题描述: 使用l...
  • gqb666
  • gqb666
  • 2012年12月05日 14:58
  • 4005

How to disable the scheduler using SCHEDULER_DISABLED attribute in 10g (文档 ID 1491941.1)

APPLIES TO: 适用于: Oracle Server - Enterprise Edition - Version 10.1.0.2 and later Information ...

error: ‘struct device’ has no member named ‘bus_id’

在新版本的内核中struct device 已经没有bus_id成员,取而代之的是通过dev_name和dev_set_name对设备的名字进行操作。         dev_name和dev_se...

JavaFX E4 RCP创建Model Fragment后报错:No application id has been found.

背景介绍 这两天应XMan团队的需求开始研究基于JavaFX的E4 RCP 。 这里先推荐一个很好的(英文)入门教程(中文系列教程实在没有找到): http://developer.eclips...
  • alanzyy
  • alanzyy
  • 2016年04月06日 19:10
  • 1089

解决Xcode7真机调试出现:The account “” has no team with ID “”

大概两周没有进行过真机调试,昨天真机调试的时候发现问题: 再进行 Fix Issue 的时候,直接提示【The account “我的Apple ID” has no team with ID “一...

Xcode7 真机调试出现 "The account 'Apple ID' has no team with ID 'team ID'的解决方案

谢谢@Jimmy4iOS 同学提供的解决方法。 Xcode7 真机测试出现 "The account 'Apple ID' has no team with ID 'team ID'的解决方案 ...
  • mr_Muyi
  • mr_Muyi
  • 2016年03月10日 14:47
  • 353

RCP 工程启动报No application id has been found 的错误

!ENTRY org.eclipse.osgi 2 0 2014-06-10 14:35:27.130 !MESSAGE One or more bundles are not resolved b...

启动MyEclipse 出现java.lang.RuntimeException: No application id has been found 解决办法

今天在用MyEclipse的时候出现了如下错误信息: !SESSION 2011-11-09 15:53:07.792 ---------------------------------------...
  • cuiran
  • cuiran
  • 2011年11月09日 15:58
  • 6480

IP&IP地址、ipv4&ipv6、子网掩码、网段计算、网络广播ID计算、默认网关、DNS服务器、DHCP服务器

IP&IP地址、ipv4&ipv6、子网掩码、网段计算、网络广播ID计算、默认网关、DNS服务器、DHCP服务器等知识...

PB对象Event ID说明

pbm_bmgetcheck 单选按钮或多选按钮是否被选。 pbm_bmgetstate 按钮是否加亮。 pbm_bmsetcheck 将无线按钮或确认框的选中状态改为未选中状态,反之亦然。 p...
内容举报
返回顶部
收藏助手
不良信息举报
您举报文章:Event ID: 30013 The DHCP allocator has disabled itself
举报原因:
原因补充:

(最多只允许输入30个字)