光纤卡安装以后,需要修改两个配置文件,分别为:
/kernel/drv/sd.conf
/kernel/drv/lpfc.conf
修改内容在以下过程中标注:
# cd /kernel/drv
# vi sd.conf
"sd.conf" 65 lines, 1611 characters
#
# Copyright (c) 1992, by Sun Microsystems, Inc.
#
#ident "@(#)sd.conf 1.9 98/01/11 SMI"
name="sd" class="scsi" class_prop="atapi"
target=0 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=1 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=2 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=3 lun=0;
name="sd" class="scsi"
target=4 lun=0;
name="sd" class="scsi"
target=5 lun=0;
name="sd" class="scsi"
target=6 lun=0;
name="sd" class="scsi"
target=8 lun=0;
name="sd" class="scsi"
target=9 lun=0;
name="sd" class="scsi"
target=10 lun=0;
name="sd" class="scsi"
target=11 lun=0;
name="sd" class="scsi"
target=12 lun=0;
name="sd" class="scsi"
target=13 lun=0;
name="sd" class="scsi"
target=14 lun=0;
name="sd" class="scsi"
target=15 lun=0;
# Start lpfc auto-generated configuration -- do NOT alter or delete this line
# WARNING: anything you put within this auto-generated section will
# be DELETED if you execute pkgrm to remove the lpfc driver package.
# You may need to add additional lines to probe for additional LUNs
# or targets. You SHOULD delete any lines that represent lpfc targets
# or LUNs that are not used.
# You should add any new entries between this line
# and the End lpfc auto generated configuration line
# name="sd" parent="lpfc" target=16 lun=0;
# name="sd" parent="lpfc" target=17 lun=0;
# A small number of LUNs for a RAID array
# name="sd" parent="lpfc" target=17 lun=1;
# name="sd" parent="lpfc" target=17 lun=2;
# name="sd" parent="lpfc" target=17 lun=3;
name="sd" parent="lpfc" target=0 lun=0;
name="sd" parent="lpfc" target=0 lun=1;
name="sd" parent="lpfc" target=0 lun=2;
name="sd" parent="lpfc" target=0 lun=3;
name="sd" parent="lpfc" target=0 lun=4;
name="sd" parent="lpfc" target=0 lun=5;
name="sd" parent="lpfc" target=0 lun=6;
name="sd" parent="lpfc" target=0 lun=7;
name="sd" parent="lpfc" target=1 lun=0;
name="sd" parent="lpfc" target=1 lun=1;
name="sd" parent="lpfc" target=1 lun=2;
name="sd" parent="lpfc" target=1 lun=3;
name="sd" parent="lpfc" target=1 lun=4;
name="sd" parent="lpfc" target=1 lun=5;
name="sd" parent="lpfc" target=1 lun=6;
name="sd" parent="lpfc" target=1 lun=7;
name="sd" parent="lpfc" target=2 lun=0;
name="sd" parent="lpfc" target=3 lun=0;
name="sd" parent="lpfc" target=4 lun=0;
name="sd" parent="lpfc" target=5 lun=0;
name="sd" parent="lpfc" target=6 lun=0;
name="sd" parent="lpfc" target=7 lun=0;
name="sd" parent="lpfc" target=8 lun=0;
name="sd" parent="lpfc" target=9 lun=0;
name="sd" parent="lpfc" target=10 lun=0;
name="sd" parent="lpfc" target=11 lun=0;
name="sd" parent="lpfc" target=12 lun=0;
name="sd" parent="lpfc" target=13 lun=0;
name="sd" parent="lpfc" target=14 lun=0;
name="sd" parent="lpfc" target=15 lun=0;
name="sd" parent="lpfc" target=16 lun=0;
name="sd" parent="lpfc" target=17 lun=0;
name="sd" parent="lpfc" target=17 lun=1;
name="sd" parent="lpfc" target=17 lun=2;
name="sd" parent="lpfc" target=17 lun=3;
--增加部分
"sd.conf" 100 lines, 3022 characters
# vi lpfc.conf
"lpfc.conf" 276 lines, 10863 characters
#
# COPYRIGHT 2004, EMULEX CORPORATION
# 3333 Susan Street, Costa Mesa, CA 92626
#
# All rights reserved. This computer program and related documentation
# is protected by copyright and distributed under licenses restricting
# its use, copying, distribution and decompilation. This computer
# program and its documentation are CONFIDENTIAL and a TRADE SECRET
# of EMULEX CORPORATION. The receipt or possession of this program
# or its documentation does not convey rights to reproduce or disclose
# its contents, or to manufacture, use, or sell anything that it may
# describe, in whole or in part, without the specific written consent
# of EMULEX CORPORATION. Any reproduction of this program without
# the express written consent of EMULEX CORPORATION is a violation
# of the copyright laws and may subject you to criminal prosecution.
#
#
# Solaris LightPulse lpfc (SCSI) / lpfn (IP) driver: global initialized data.
#
# lpfc.conf 1.26 2004/03/15 11:41:22PST
# Verbosity: only turn this flag on if you are willing to risk being
# deluged with LOTS of information.
# You can set a bit mask to record specific types of verbose messages:
#
# 0x1 ELS events
# 0x2 Device Discovery events
# 0x4 Mailbox Command events
# 0x8 Initialization events
# 0x10 Link Attention events
# 0x20 IP events
# 0x40 FCP events
# 0x80 Node table events
# 0x400 Miscellaneous events
# 0x800 SLI events
# 0x2000 IOCtl events
# 0xffff Log All Events
log-verbose=0x0;
# Setting log-only to 0 causes log messages to be printed on the
# console and to be logged to syslog (which may send them to the
# console again if it's configured to do so).
# Setting log-only to 1 causes log messages to go to syslog only.
log-only=1;
#
# +++ Variables relating to FCP (SCSI) support. +++
#
/top
# If set, nodev-holdio will hold all I/O errors on devices that disappear
# until they come back. Default is 0, return errors with no-device-delay.
nodev-holdio=0;
# If set, nodev-tmo will hold all I/O errors on devices that disappear
# until the timer [0 to 255 secs] expires. Default is 30, return errors
# with no-device-delay.
nodev-tmo=30;
# Use no-device-delay to delay FCP RSP errors and certain check conditions.
delay-rsp-err=0;
# Treat certain check conditions as an FCP error.
check-cond-err=0;
# num-iocbs [128 to 10240] - number of iocb buffers to allocate
num-iocbs=256;
# num-bufs [64 to 4096] - number of buffers to allocate
# Buffers are needed to support Fibre channel Extended Link Services.
# Also used for SLI-2 FCP buffers, one per FCP command, and Mailbox commands.
num-bufs=128;
# topology: link topology for initializing the Fibre Channel connection.
# 0 = attempt loop mode, if it fails attempt point-to-point mode
# 2 = attempt point-to-point mode only
# 4 = attempt loop mode only
# 6 = attempt point-to-point mode, if it fails attempt loop mode
# Set point-to-point mode if you want to run as an N_Port.
# Set loop mode if you want to run as an NL_Port.
topology=2;
--由0更改为2
# Set a preferred ALPA for the adapter, only valid if topology is loop.
# lpfc0-assign-alpa=2; Request ALPA 2 for lpfc0
# ip-class: FC class (2 or 3) to use for the IP protocol.
ip-class=3;
# fcp-class: FC class (2 or 3) to use for the FCP protocol.
fcp-class=3;
# Use ADISC for FCP rediscovery instead of PLOGI.
use-adisc=0;
# Extra IO timeout [0 to 255 secs] for fabrics
extra-io-tmo=0;
# Number of 4k STREAMS buffers [64 to 1024] to post to IP ring.
"lpfc.conf" 276 lines, 10863 characters
# reboot
修改配置文件后,重起主机生效
发表于 @ 2004年08月28日 12:09:00|评论(loading...)|编辑