为openwrt 15.05(Chaos Calmer) 新增优酷土豆路由宝配置

一 主要修改的文件有：

• 修改： target/linux/ramips/base-files/etc/board.d/01_leds
• 修改： target/linux/ramips/base-files/etc/board.d/02_network
• 修改： target/linux/ramips/base-files/lib/ramips.sh
• 修改： target/linux/ramips/base-files/lib/upgrade/platform.sh
• 修改： target/linux/ramips/image/Makefile
• 新增： target/linux/ramips/dts/YOUKU.dts 

二 文件修改

• 修改： target/linux/ramips/base-files/etc/board.d/01_leds新增youku节点

•     xiaomi-miwifi-mini)
          ucidef_set_led_default "power" "power" "xiaomi:red:status" "1"
          ;;
      youku)
          ucidef_set_led_default "power" "power" "youku-yk1:blue:power" "1"
          ucidef_set_led_default "wan" "wan" "youku-yk1:blue:wan" "1"
          set_wifi_led "youku-yk1:blue:air"
          set_usb_led "youku-yk1:blue:usb"
          ;;
      y1 |\
      y1s)
          ucidef_set_led_default "power" "power" "lenovo:blue:power" "1"
          set_usb_led "lenovo:blue:usb"
          set_wifi_led "lenovo:blue:wifi"               ;;   

• 修改： target/linux/ramips/base-files/etc/board.d/02_network

•    
     
      3g-6200n | \
      ai-br100 | \
      dir-610-a1 | \
      dir-300-b7 | \
      dir-320-b1 | \
      dir-615-h1 | \
      firewrt | \
      pbr-m1 | \
      hlk-rm04 | \
      mt7621 | \
      mt7628 | \
      mzk-w300nh2 | \
      mzk-750dhp | \
      whr-300hp2 | \
      whr-600d | \
      wsr-600 | \
      wsr-1166 | \
      wt1520 | \
      xiaomi-miwifi-mini |\
      youku |\
      y1|\
      zbt-wg2626)
          ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
          ucidef_add_switch "switch0" "1" "1"
          ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
          ucidef_add_switch_vlan "switch0" "2" "4 6t"
          ;;
  修改： target/linux/ramips/base-files/lib/ramips.sh
      *"Xiaomi MiWiFi Mini")
          name="xiaomi-miwifi-mini"
          ;;
      *"YOUKU")
          name="youku"
          ;;
      *"Sercomm NA930")
          name="na930"
          ;;
  修改： target/linux/ramips/base-files/lib/upgrade/platform.sh
      wr6202 |\
      wr8305rt |\
      wrtnode |\
      wt1520 |\
      wt3020 |\
      x5 |\
      x8 |\
      xiaomi-miwifi-mini |\
      youku |\
      y1 |\
      y1s |\
      zbt-wa05 |\
      zbt-wg2626 |\
      zte-q7)
          [ "$magic" != "27051956" ] && {
              echo "Invalid image type."
              return 1
          }
          return 0
          ;;
  修改： target/linux/ramips/image/Makefile
  Image/Build/Profile/YOUKU=$(call BuildFirmware/Default32M/$(1),$(1),YOUKU,YOUKU)
  #Image/Build/Profile/E1700=$(call BuildFirmware/UMedia/$(1),$(1),e1700,E1700,0x013326)
  #ex2700_mtd_size=3866624
  #Image/Build/Profile/EX2700=$(call BuildFirmware/Netgear/$(1),$(1),ex2700,EX2700,65536,29764623+4+0+32+2x2+0,$(ex2700_mtd_size))
  #Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
  #Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
  #Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
  #Image/Build/Profile/MT7620a_V22SG=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG)
  #br100_mtd_size=8126464
  #Image/Build/Profile/AIBR100=$(call BuildFirmware/CustomFlash/$(1),$(1),ai-br100,AIBR100,$(br100_mtd_size),Ai-BR)
  #Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
  #whr_300hp2_mtd_size=7012352
  #Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
  #Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size))
  #whr_1166d_mtd_size=15400960
  #Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166hd_mtd_size))
  #dlink810l_mtd_size=6881280
  #Image/Build/Profile/CF-WR800N=$(call BuildFirmware/Default8M/$(1),$(1),cf-wr800n,CF-WR800N)
  #Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
  #na930_mtd_size=20971520
  #Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
  #Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
  #Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1)
  #Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S)
  #Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
  #Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2)
  #Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
  #Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
  #Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
  #Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
  #Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
  #Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),xiaomi-miwifi-mini,XIAOMI-MIWIFI-MINI)
  #Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
  #Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
  #Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
  #microwrt_mtd_size=16515072
  #Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size))
  
  
  ifeq ($(SUBTARGET),mt7620)
  define Image/Build/Profile/Default
      $(call Image/Build/Profile/YOUKU,$(1))
  #    $(call Image/Build/Profile/E1700,$(1))
  #    $(call Image/Build/Profile/EX2700,$(1))
  #    $(call Image/Build/Profile/MT7620a,$(1))
  #    $(call Image/Build/Profile/MT7620a_MT7610e,$(1))
  #    $(call Image/Build/Profile/MT7620a_MT7530,$(1))
  #    $(call Image/Build/Profile/MT7620a_V22SG,$(1))
  #    $(call Image/Build/Profile/CF-WR800N,$(1))
  #    $(call Image/Build/Profile/RP-N53,$(1))
  #    $(call Image/Build/Profile/DIR-810L,$(1))
  #    $(call Image/Build/Profile/WHR300HP2,$(1))
  #    $(call Image/Build/Profile/WHR600D,$(1))
  #    $(call Image/Build/Profile/WHR1166D,$(1))
  #    $(call Image/Build/Profile/MZK-750DHP,$(1))
  #    $(call Image/Build/Profile/NA930,$(1))
  #    $(call Image/Build/Profile/Y1,$(1))
  #    $(call Image/Build/Profile/Y1S,$(1))
  #    $(call Image/Build/Profile/MLW221,$(1))
  #    $(call Image/Build/Profile/MLWG2,$(1))
  #    $(call Image/Build/Profile/WMR300,$(1))
  #    $(call Image/Build/Profile/RT-N14U,$(1))
  #    $(call Image/Build/Profile/WR8305RT,$(1))
  #    $(call Image/Build/Profile/WRTNODE,$(1))
  #    $(call Image/Build/Profile/WT3020,$(1))
  #    $(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1))
  #    $(call Image/Build/Profile/ZTE-Q7,$(1))
  #    $(call Image/Build/Profile/ZBT-WA05,$(1))
  #    $(call Image/Build/Profile/ArcherC20i,$(1))
  #    $(call Image/Build/Profile/MicroWRT,$(1))
  endef
  endif
  新增： target/linux/ramips/dts/YOUKU.dts
  /dts-v1/;
  
  /include/ "mt7620a.dtsi"
  
  / {
      compatible = "YOUKU", "ralink,mt7620a-soc";
      model = "YOUKU";
  
      chosen {
          bootargs = "console=ttyS0,115200";
      };
  
      palmbus@10000000 {
          gpio0: gpio@600 {
              status = "okay";
          };
  
          gpio1: gpio@638 {
              status = "okay";
          };
  
          gpio2: gpio@660 {
              status = "okay";
          };
  
          spi@b00 {
              status = "okay";
  
              m25p80@0 {
                  #address-cells = <1>;
                  #size-cells = <1>;
                  compatible = "w25q128";
                  reg = <0 0>;
                  linux,modalias = "m25p80", "w25q128";
                  spi-max-frequency = <10000000>;
  
                  partition@0 {
                      label = "u-boot";
                      reg = <0x0 0x30000>;
                  };
  
                  partition@30000 {
                      label = "u-boot-env";
                      reg = <0x30000 0x10000>;
                      read-only;
                  };
  
                  factory: partition@40000 {
                      label = "factory";
                      reg = <0x40000 0x10000>;
                      read-only;
                  };
  
                  partition@50000 {
                      label = "firmware";
                      reg = <0x50000 0x1f80000>;
                  };
  
                  partition@1fd0000 {
                      label = "crash";
                      reg = <0x1fd0000 0x10000>;
                  };
  
                  partition@1fe0000 {
                      label = "reserved";
                      reg = <0x1fe0000 0x10000>;
                      read-only;
                  };
  
                  partition@1ff0000 {
                      label = "Bdata";
                      reg = <0x1ff0000 0x10000>;
                  };
              };
          };
      };
  
      ehci@101c0000 {
          status = "okay";
      };
  
      ohci@101c1000 {
          status = "okay";
      };
  
      sdhci@10130000 {
          status = "okay";
      };
  
      ethernet@10100000 {
          pinctrl-names = "default";
          pinctrl-0 = <&ephy_pins>;
          mtd-mac-address = <&factory 0x4>;
          ralink,port-map = "llllw";
      };
  
      wmac@10180000 {
          ralink,mtd-eeprom = <&factory 0>;
      };
  
      pcie@10140000 {
          status = "okay";
  
          pcie-bridge {
              mt76@0,0 {
                  reg = <0x0000 0 0 0 0>;
                  device_type = "pci";
                  mediatek,mtd-eeprom = <&factory 0x8000>;
                  mediatek,2ghz = <0>;
              };
          };
      };
  
      pinctrl {
          state_default: pinctrl0 {
              gpio {
                  ralink,group = "i2c", "rgmii1";
                  ralink,function = "gpio";
              };
          };
      };
  
      gpio-leds {
          compatible = "gpio-leds";
          wan {
              label = "youku-yk1:blue:wan";
              gpios = <&gpio2 4 1>;
          };
          air {
              label = "youku-yk1:blue:air";
              gpios = <&gpio3 0 1>;
          };
          usb {
              label = "youku-yk1:blue:usb";
              gpios = <&gpio1 11 1>;
          };
          power {
              label = "youku-yk1:blue:power";
              gpios = <&gpio1 5 1>;
          };
      };
  
      gpio-keys-polled {
          compatible = "gpio-keys-polled";
          #address-cells = <1>;
          #size-cells = <0>;
          poll-interval = <20>;
          reset {
              label = "reset";
              gpios = <&gpio0 1 1>;
              linux,code = <0x198>;
          };
      };
  };
  

• 转载自：http://www.tuicool.com/articles/VZba6r3