1. 安装 mysql
mysql-5.0.41-linux-i686-glibc23.tar.gz 由于 mysql 是二进制包。所以还是比较方便的。
直接解压。然后移动。
mv mysql-5.0.41-linux-x86_64-glibc23 /usr/local/mysql
cd /usr/local/mysql
groupadd mysql
useradd -g mysql mysql
chown -R mysql .
chgrp -R mysql .
chown -R root .
./scripts/mysql_install_db --user=mysql --basedir=/usr/local/mysql --datadir=/var/www/mysql/data
cp /usr/local/mysql/support-files/my-huge.cnf /etc/my.cnf
cp /usr/local/mysql/support-files/mysql.server /etc/rc.d/init.d/mysqld
chmod 755 /etc/rc.d/init.d/mysqld
chkconfig –add mysqld
chkconfig --level 3 mysqld on
mv /usr/local/mysql/data /var/www/mysql
chown -R mysql:mysql /var/www/mysql
编辑 /etc/my.cnf
在 [mysqld] 段增加
datadir = /var/www/mysql
skip-innodb
wait-timeout = 10
max_connections = 512
max_connect_errors = 10000000
在 [mysqld] 段修改
max_allowed_packet = 16M
thread_cache_size = CPU 个数 *2
将 log-bin 注释
service mysqld start
bin/mysqladmin -u root -p
如果启动 /opt/module/mysql/bin/mysqld_safe &
# 注：这里可能会出现错误。
[root@localhost mysql]# Starting mysqld daemon with databases from /opt/module/mysql/data
STOPPING server from pid file /opt/module/mysql/data/localhost.localdomain.pid
101029 17:49:43 mysqld ended
这是因为 basedir 与 datadir 目录未设置的问题。那么在 /etc/my.cnf [mysqld] 里和 /etc/rc.d/init.d/mysqld 里面都上
添加 basedir = /opt/module/mysql datadir=/opt/data/mysql （这都是我的目录，相应改成你的目录）
再次启动。就应该可以了。
2. 安装扩展库
安装 pcre
tar -zxvf pcre-7.8.tar.gz
cd pcre-7.8
./configure
make && make install clean
tar zxvf zlib-1.2.5.tar.gz
cd zlib-1.2.5
./configure --prefix=/usr
make && make install clean
cd ..
tar zxvf libpng-1.2.44.tar.gz
cd libpng-1.2.44
./configure
make && make install clean
cd ..
安装 jpeg
tar zxvf jpegsrc.v8b.tar.gz
cd jpeg-8b
./configure -enable-shared -enable-static
make && make install clean
cd ..
tar zxvf freetype-2.4.4.tar.gz
cd freetype-2.4.4
./configure
make && make install clean
cd ..
安装 autoconf
tar zxvf autoconf-2.68.tar.gz
cd autoconf -2.68
./configure
make && make install clean
cd ..
tar zxvf gd-2.0.35.tar.gz
cd gd-2.0.35
./configure --prefix=/usr/local/gd2 --with-zlib --with-freetype --with-jpeg --with-png
make && make install clean
cd ..
tar -zxvf libxml2-2.7.6.tar.gz
cd libxml2-2.7.6
./configure
make && make install clean
cd ..
安装 libiconv
tar zxvf libiconv-1.13.1.tar.gz
cd libiconv-1.13.1/
./configure --prefix=/usr/local
make && make install clean
cd ..
安装 libmcrypt
tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make && make install clean
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make && make install clean
cd ../../
安装 mhash
tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make && make install clean
cd ../
ln 命令在某个地方建立一个同步的链接
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config
安装 mcrypt
tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make && make install clean
cd ../
3. 安装编译 PHP （ FASTCGI ）
tar zxvf php-5.2.17.tar.gz
gzip -cd php-5.2.17-fpm-0.5.14.diff.gz | patch -d php-5.2.17 -p1
cd php-5.2.17/
./configure --prefix=/usr/local/php /
--with-config-file-path=/usr/local/php/etc /
--with-mysql=/usr/local/mysql /
--with-mysqli=/usr/local/mysql/bin/mysql_config /
--with-iconv-dir=/usr/local /
--with-freetype-dir /
--with-jpeg-dir /
--with-png-dir /
--with-zlib /
--with-libxml-dir=/usr /
--enable-xml /
--disable-rpath /
--enable-discard-path /
--enable-safe-mode /
--enable-bcmath /
--enable-shmop /
--enable-sysvsem /
--enable-inline-optimization /
--with-curl /
--with-curlwrappers /
--enable-mbregex /
--enable-fastcgi /
--enable-fpm /
--enable-force-cgi-redirect /
--enable-mbstring /
--with-mcrypt /
--with-gd=/usr/local/gd2/ /
--enable-gd-native-ttf /
--with-openssl /
--with-mhash /
--enable-pcntl /
--enable-sockets /
--with-ldap /
--with-ldap-sasl
make ZEND_EXTRA_LIBS='-liconv'
make install clean
# 注：这里可能会出现错误。
Installing PEAR environment: /usr/local/php/lib/php/
/usr/local/src/php-5.2.17/sapi/cli/php: error while loading shared libraries: libmysqlclient.so.15: cannot open shared object file: No such file or directory
make[1]: *** [install-pear-installer] Error 127
make: *** [install-pear] Error 2
说没找到 libmysqlclient.so.15 那么解决方法。
cp /usr/local/mysql/lib/libmysqlclient.so.15 /usr/lib
再次 make install 搞定！
cp php.ini-dist /usr/local/php/etc/php.ini
mv -f /usr/local/src/conf/php-fpm.conf /usr/local/php/etc/php-fpm.conf
echo 'ulimit -SHn 65535' >> /etc/rc.local
echo '/usr/local/php/sbin/php-fpm start' >> /etc/rc.local
cd ../
4. 编译安装 PHP5 扩展模块
memcache
tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make && make install clean
cd ../
eaccelerator
tar jxvf eaccelerator-0.9.5.3.tar.bz2
cd eaccelerator-0.9.5.3/
/usr/local/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/php/bin/php-config
make && make install clean
cd ../
配置 eAccelerator 加速 PHP ：
mkdir -p /usr/local/eaccelerator_cache
vi /usr/local/php/etc/php.ini
[eaccelerator]
zend_extension="/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="128"
eaccelerator.cache_dir="/usr/local/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="300"
eaccelerator.shm_prune_period="120"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"
修改配置文件：
vi /etc/sysctl.conf
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
# kernel.shmmax = 4294967295
kernel.shmmax = 134217728
# Controls the maximum number of shared memory segments, in pages
kernel.shmall = 268435456
然后执行以下命令使配置生效：
/sbin/sysctl -p
PDO_MYSQL
tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config --with-pdo-mysql=/usr/local/mysql
make && make install clean
cd ../
ImageMagick
tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make && make install clean
cd ../
imagick
tar zxvf imagick-2.2.2.tgz
cd imagick-2.2.2/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make && make install clean
cd ../
Memcached
tar zxvf libevent-1.4.13-stable.tar.gz
cd libevent-1.4.13-stable
./configure --prefix=/usr/lib
make && make install clean
cd ../
tar zxvf memcached-1.4.5.tar.gz
cd memcached-1.4.5
./configure --prefix=/usr/local --with-libevent=/usr/lib/lib
make && make install clean
/usr/local/bin/memcached -d -u www -m 128
-p <num>
监听的 TCP 端口 ( 缺省 : 11211)
-d
以守护进程方式运行 以守护进程方式运行 Memcached Memcached
-u <username>
运行运行 Memcached 的账户 非 root 用户
-m <num>
最大的内存使用单位是 MB 缺省是 64MB
-c <num>
软连接数量缺省是 1024
-v
输出警告和错误信息
-vv
打印客户端的请求和返回信息
-h
打印帮助信息
-i
打印 memcached 和 libevent 的版权信息
# 注：这里可能会出现错误。
error while loading shared libraries: libevent-1.4.so.2: cannot open shared object file: No such file or directory 这样的问题是在安装 memcached 的时候遇到的。
我按别人的攻略安装了 libevent 和 memcached 之后却发现在执行的时候出现了。 error while loading shared libraries: libevent-1.4.so.2: cannot open shared object file: No such file or directory 这个错误提示。
解决类似问题的步骤我相信我的做法可以通用。
1. 首先 find / -name libevent-1.4.so.2 找到缺少的链接文件到底在那儿。
2. LD_DEBUG=libs /usr/local/bin/memcached -v
3. 从 Debug 信息中就知道程序去哪里找链接库了。我这边程序去 trying file=/usr/lib/libevent-1.4.so.2 而我的链接库的实际存储位置是 /usr/local/lib/libevent-1.4.so.2
4. 做一个软连接 ln -s /usr/lib/lib/libevent-1.4.so.2 /usr/lib/libevent-1.4.so.2
5. 安装 ZendOptimizer
tar zxvf ZendOptimizer-3.3.9-linux-glibc23-i386.tar.gz
cd ZendOptimizer-3.3.9-linux-glibc23-i386
cp data/5_2_x_comp/ZendOptimizer.so /usr/local/php/include/
编辑 php.ini
vi /usr/local/php/etc/ php.ini
extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/"
extension=pdo_mysql.so
extension=memcache.so
extension=imagick.so
[zend]
zend_optimizer.optimization_level=15
zend_extension="/usr/local/php/include/ZendOptimizer.so"
再查找 output_buffering = Off
修改为 output_buffering = On
重启 PHP FCGI
/usr/local/php/sbin/php-fpm restart
6. 安装 nginx
groupadd www
useradd -g www www
tar zxvf nginx..gz
cd nginx
./configure --prefix=/usr/local/nginx /
--conf-path=/usr/local/nginx/conf/nginx.conf /
--with-http_realip_module /
--with-http_addition_module /
--with-http_gzip_static_module /
--with-http_random_index_module /
--with-http_stub_status_module /
--with-http_sub_module /
--with-http_dav_module
make && make install
Nginx 日志目录
mkdir -p /var/log/nginx
chmod +w /var/log/nginx
chown -R www:www /var/log/nginx
创建 Nginx 配置文件
① 、在 /usr/local/nginx/conf/ 目录中创建 nginx.conf 文件：
rm -f /usr/local//nginx/conf/nginx.conf
vim /usr/local/nginx/conf/nginx.conf
user www www;
worker_processes 4;
error_log /var/log/nginx/error.log;
pid /var/log/nginx/nginx.pid;
worker_rlimit_nofile 65535;
events
{
use epoll;
worker_connections 65535;
}
http
{
include mime.types;
default_type application/octet-stream;
#charset gb2312;
charset utf-8;
server_names_hash_bucket_size 128;
client_header_buffer_size 32k;
large_client_header_buffers 4 32k;
client_max_body_size 8m;
sendfile on;
tcp_nopush on;
keepalive_timeout 60;
tcp_nodelay on;
fastcgi_connect_timeout 300;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 64k;
fastcgi_buffers 4 64k;
fastcgi_busy_buffers_size 128k;
fastcgi_temp_file_write_size 128k;
gzip on;
gzip_min_length 1k;
gzip_buffers 4 16k;
gzip_http_version 1.0;
gzip_comp_level 2;
gzip_types text/plain application/x-javascript text/css application/xml;
gzip_vary on;
server
{
listen 10.0.0.61:80;
server_name 10.0.0.61;
index index.html index.htm index.php;
root /home/www/wwwroot;
location ~ .*/.php?$
{
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fcgi.conf;
}
location ~ .*/.(gif|jpg|jpeg|png|bmp|swf)$
{
expires 30d;
}
location ~ .*/.(js|css)?$
{
expires 1h;
}
location /NginxStatus
{
stub_status on;
access_log off;
}
access_log off;
}
}
② 、在 /usr/local/webserver/nginx/conf/ 目录中创建 fcgi.conf 文件：
vi /usr/local/nginx/conf/fcgi.conf
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx;
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;
建立 nginx 启动脚本
vi /etc/init.d/nginx
#!/bin/bash
# nginx Startup script for the Nginx HTTP Server
# this script create it by jackbillow at 2007.10.15.
# it is v.0.0.2 version.
# if you find any errors on this scripts,please contact jackbillow.
# and send mail to jackbillow at gmail dot com.
#
# chkconfig: - 85 15
# description: Nginx is a high-performance web and proxy server.
# It has a lot of features, but it's not for everyone.
# processname: nginx
# pidfile: /usr/local/nginx/logs/nginx.pid
# config: /usr/local/nginx/conf/nginx.conf
nginxd=/usr/local/nginx/sbin/nginx
nginx_config=/usr/local/nginx/conf/nginx.conf
nginx_pid=/var/log/nginx/nginx.pid
RETVAL=0
prog="nginx"
# Source function library.
. /etc/rc.d/init.d/functions
"/etc/init.d/nginx" [dos] 101L, 1996C
#!/bin/bash
# nginx Startup script for the Nginx HTTP Server
# this script create it by jackbillow at 2007.10.15.
# it is v.0.0.2 version.
# if you find any errors on this scripts,please contact jackbillow.
# and send mail to jackbillow at gmail dot com.
#
# chkconfig: - 85 15
# description: Nginx is a high-performance web and proxy server.
# It has a lot of features, but it's not for everyone.
# processname: nginx
# pidfile: /usr/local/nginx/logs/nginx.pid
# config: /usr/local/nginx/conf/nginx.conf
nginxd=/usr/local/nginx/sbin/nginx
nginx_config=/usr/local/nginx/conf/nginx.conf
nginx_pid=/var/log/nginx/nginx.pid
RETVAL=0
prog="nginx"
# Source function library.
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
# Check that networking is up.
[ ${NETWORKING} = "no" ] && exit 0
[ -x $nginxd ] || exit 0
# Start nginx daemons functions.
start() {
if [ -e $nginx_pid ];then
echo "nginx already running...."
exit 1
fi
echo -n $"Starting $prog: "
daemon $nginxd -c ${nginx_config}
RETVAL=$?
echo
[ $RETVAL = 0 ] && touch /var/lock/subsys/nginx
return $RETVAL
}
# Stop nginx daemons functions.
stop() {
echo -n $"Stopping $prog: "
killproc $nginxd
RETVAL=$?
echo
[ $RETVAL = 0 ] && rm -f /var/lock/subsys/nginx /usr/local/nginx/logs/nginx.pid
}
# reload nginx service functions.
reload() {
echo -n $"Reloading $prog: "
#kill -HUP `cat ${nginx_pid}`
killproc $nginxd -HUP
RETVAL=$?
echo
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
reload)
reload
;;
restart)
stop
start
;;
status)
status $prog
RETVAL=$?
;;
*)
echo $"Usage: $prog {start|stop|restart|reload|status|help}"
exit 1
esac
exit $RETVAL
chmod 755 /etc/init.d/nginx
chkconfig --add nginx
chkconfig nginx on
7. 启动 Nginx 和 PHP
ulimit -SHn 65535
/usr/local/php/sbin/php-fpm start
service nginx start
8. 优化 Linux 内核参数
vi /etc/sysctl.conf
在末尾增加以下内容：
net.core.netdev_max_backlog = 32768
net.core.somaxconn = 32768
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 65536
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800
net.ipv4.ip_local_port_range = 1024 65535
使配置立即生效：
/sbin/sysctl -p
Sysctl 修改
vi /etc/rc.local
加入如下文本
sysctl kern.ipc.maxsockets=100000 ## 增加并发的 socket ，对于 ddos 很有用
sysctl kern.ipc.somaxconn=65535 ## 打开文件数
sysctl net.inet.tcp.msl=2500 ##timeout 时间
10. 编写每天定时切割 Nginx 日志的脚本
1 、创建脚本 /usr/local/webserver/nginx/sbin/cut_nginx_log.sh
vi /usr/local/webserver/nginx/sbin/cut_nginx_log.sh
输入以下内容：
#!/bin/bash
# This script run at 00:00
# The Nginx logs path
logs_path="/usr/local/webserver/nginx/logs/"
mkdir -p ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/
mv ${logs_path}access.log ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/access_$(date -d "yesterday" +"%Y%m%d").log
kill -USR1 `cat /usr/local/webserver/nginx/nginx.pid`
2 、设置 crontab ，每天凌晨 00:00 切割 nginx 访问日志
crontab -e
输入以下内容：
00 00 * * * /bin/bash /usr/local/nginx/sbin/cut_nginx_log.sh
262
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
