编码转换utf-8/gb2312

'UTF转GB---将UTF8编码文字转换为GB编码文字   
function UTF2GB(UTFStr) for Dig=1 to len(UTFStr)   
'如果UTF8编码文字以%开头则进行转换  
if mid(UTFStr,Dig,1)="%" then   
     'UTF8编码文字大于8则转换为汉字  
    if len(UTFStr) >= Dig+8 then   
       GBStr=GBStr & ConvChinese(mid(UTFStr,Dig,9))   
       Dig=Dig+8   
    else   
      GBStr=GBStr & mid(UTFStr,Dig,1)   
    end if   
else   
     GBStr=GBStr & mid(UTFStr,Dig,1)   
end if   
next   
UTF2GB=GBStr   
end function  
  
  
'UTF8编码文字将转换为汉字  
function ConvChinese(x)   
   A=split(mid(x,2),"%")   
   i=0   
   j=0   
for i=0 to ubound(A)   
     A(i)=c16to2(A(i))   
next   
for i=0 to ubound(A)-1   
    DigS=instr(A(i),"0")   
    Unicode=""   
    for j=1 to DigS-1   
      if j=1 then   
        A(i)=right(A(i),len(A(i))-DigS)   
        Unicode=Unicode & A(i)   
      else   
         i=i+1   
         A(i)=right(A(i),len(A(i))-2)   
         Unicode=Unicode & A(i)   
      end if   
    next  
  
    if len(c2to16(Unicode))=4 then   
       ConvChinese=ConvChinese & chrw(int("&H" & c2to16(Unicode)))   
    else   
       ConvChinese=ConvChinese & chr(int("&H" & c2to16(Unicode)))   
    end if   
next   
end function  
  
'二进制代码转换为十六进制代码  
unction c2to16(x)  
   i=1   
   for i=1 to len(x) step 4   
      c2to16=c2to16 & hex(c2to10(mid(x,i,4)))   
   next   
end function  
  
  
'二进制代码转换为十进制代码  
function c2to10(x)  
   c2to10=0   
   if x="0" then exit function   
     i=0   
   for i= 0 to len(x) -1   
      if mid(x,len(x)-i,1)="1" then c2to10=c2to10+2^(i)   
   next   
end function  
  
  
'十六进制代码转换为二进制代码  
function c16to2(x)   
    i=0   
    for i=1 to len(trim(x))   
      tempstr= c10to2(cint(int("&h" & mid(x,i,1))))   
      do while len(tempstr)<4   
         tempstr="0" & tempstr   
      loop   
      c16to2=c16to2 & tempstr   
   next   
end function   
  
'十进制代码转换为二进制代码  
function c10to2(x)   
   mysign=sgn(x)   
   x=abs(x)   
   DigS=1   
   do   
      if x<2^DigS then   
        exit do   
      else   
        DigS=DigS+1   
      end if   
   loop   
   tempnum=x  
  
   i=0   
   for i=DigS to 1 step-1   
      if tempnum>=2^(i-1) then   
         tempnum=tempnum-2^(i-1)   
         c10to2=c10to2 & "1"   
      else   
         c10to2=c10to2 & "0"   
      end if   
   next   
   if mysign=-1 then c10to2="-" & c10to2   
end function  
  
  
'GB转UTF8--将GB编码文字转换为UTF8编码文字  
Function toUTF8(szInput)  
    Dim wch, uch, szRet  
    Dim x  
    Dim nAsc, nAsc2, nAsc3  
    '如果输入参数为空，则退出函数  
    If szInput = "" Then  
        toUTF8 = szInput  
        Exit Function  
    End If  
    '开始转换  
     For x = 1 To Len(szInput)  
        '利用mid函数分拆GB编码文字  
        wch = Mid(szInput, x, 1)  
        '利用ascW函数返回每一个GB编码文字的Unicode字符代码  
        '注：asc函数返回的是ANSI 字符代码，注意区别  
        nAsc = AscW(wch)  
        If nAsc < 0 Then nAsc = nAsc + 65536  
      
        If (nAsc And &HFF80) = 0 Then  
            szRet = szRet & wch  
        Else  
            If (nAsc And &HF000) = 0 Then  
                uch = "%" & Hex(((nAsc / 2 ^ 6)) Or &HC0) & Hex(nAsc And &H3F Or &H80)  
                szRet = szRet & uch  
            Else  
               'GB编码文字的Unicode字符代码在0800 - FFFF之间采用三字节模版  
                uch = "%" & Hex((nAsc / 2 ^ 12) Or &HE0) & "%" & _  
                            Hex((nAsc / 2 ^ 6) And &H3F Or &H80) & "%" & _  
                            Hex(nAsc And &H3F Or &H80)  
                szRet = szRet & uch  
            End If  
        End If  
    Next  
          
    toUTF8 = szRet  
End Function  
  
  
'GB转unicode---将GB编码文字转换为unicode编码文字  
function chinese2unicode(Str)   
dim i   
dim Str_one   
dim Str_unicode   
if(isnull(Str)) then  
     exit function  
end if  
for i=1 to len(Str)   
    Str_one=Mid(Str,i,1)   
    Str_unicode=Str_unicode&chr(38)   
    Str_unicode=Str_unicode&chr(35)   
    Str_unicode=Str_unicode&chr(120)   
    Str_unicode=Str_unicode& Hex(ascw(Str_one))   
    Str_unicode=Str_unicode&chr(59)   
next   
chinese2unicode=Str_unicode   
end function  
  
  
'URL解码  
Function URLDecode(enStr)  
dim deStr  
dim c,i,v  
deStr=""  
for i=1 to len(enStr)  
c=Mid(enStr,i,1)  
if c="%" then  
   v=eval("&h"+Mid(enStr,i+1,2))  
   if v<128 then  
    deStr=deStr&chr(v)  
    i=i+2  
   else  
    if isvalidhex(mid(enstr,i,3)) then  
     if isvalidhex(mid(enstr,i+3,3)) then  
      v=eval("&h"+Mid(enStr,i+1,2)+Mid(enStr,i+4,2))  
      deStr=deStr&chr(v)  
      i=i+5  
     else  
      v=eval("&h"+Mid(enStr,i+1,2)+cstr(hex(asc(Mid(enStr,i+3,1)))))  
      deStr=deStr&chr(v)  
      i=i+3   
     end if   
    else   
     destr=destr&c  
    end if  
   end if  
else  
   if c="+" then  
    deStr=deStr&" "  
   else  
    deStr=deStr&c  
   end if  
end if  
next  
URLDecode=deStr  
end function  
  
  
'判断是否为有效的十六进制代码  
function isvalidhex(str)  
dim c  
isvalidhex=true  
str=ucase(str)  
if len(str)<>3 then isvalidhex=false:exit function  
if left(str,1)<>"%" then isvalidhex=false:exit function  
c=mid(str,2,1)  
if not (((c>="0") and (c<="9")) or ((c>="A") and (c<="Z"))) then isvalidhex=false:exit function  
c=mid(str,3,1)  
if not (((c>="0") and (c<="9")) or ((c>="A") and (c<="Z"))) then isvalidhex=false:exit function  
end function