来自:http://blog.sina.com.cn/weidebao1985
I. Installation & Setup
1. Install Z-Stack™ 2.3.1 for CC2530.
the download kitwebsite is:
2. Install IAR Embedded Workbench for 8051.
3.
and the zip as shown in below image:
C:\Texas Instruments\ZStack-CC2530-2.3.1-1.4.0\Projects\zstack\Samples
II. Problems of need to say:
1、IAR ew8051 v7.51 or above;
2、the Stack is ZStack-CC2530-2.4.0-1.4.0;
2、When I try to build the project I get the following linker error :
III. Method to resolve:
1、You just need to add a new file to the project. In the OSAL group of files, addOSAL_Math.s51. You'll find this file here: C:\Texas Instruments\ZStack-CC2530-2.4.0-1.4.0\Components\osal\mcu\cc2530.
2、Rebuild the project and you should not get any errors.
注:本文是作者原创,转载须保证文章的完整性并标明出处(http://blog.sina.com.cn/weidebao1985)。尊重作者,支持原创!