S5PV210平台修改为只使用MEMORY PORT2

按三星默认的u-boot，内存起始地址是0x20000000，即memory port1，

如果要让u-boot只在0x40000000（即memory port2） 运行，则需要修改的

地方有： （参考T34平台u-boot中的修改为0x30000000）

1. board\samsung\smdkc110\lowlevel_init.S

.set __base,0x200    ==>> .set __base,0x400

// 256MB for SDRAM with cacheable

.rept 0xD00 - 0xC00

FL_SECTION_ENTRY __base,3,0,1,1

.set __base,__base+1

.endr

2. board/samsung/smdkc110/smdkc110.c

ulong virt_to_phy_smdkc110(ulong addr)

{

        if ((0xc0000000 <= addr) && (addr < 0xd0000000))

                return (addr - 0xc0000000 + 0x20000000); //yan

        else

                printf("The input address don't need "\

                        "a virtual-to-physical translation : %08lx\n", addr);

        return addr;

}

改为：

ulong virt_to_phy_smdkc110(ulong addr)

{

        if ((0xc0000000 <= addr) && (addr < 0xd0000000))

                return (addr - 0xc0000000 + MEMORY_BASE_ADDRESS); //yan

        else

                printf("The input address don't need "\

                        "a virtual-to-physical translation : %08lx\n", addr);

        return addr;

}

3. include\configs\smdkv210single.h

#define MEMORY_BASE_ADDRESS 0x40000000

#define DMC1_MEMCONFIG_0 0x40E01323

#define CONFIG_NR_DRAM_BANKS    1          /* we have 2 bank of DRAM */

#define SDRAM_BANK_SIZE         0x20000000    /* 512 MB */

//#define SDRAM_BANK_SIZE         0x10000000

#define PHYS_SDRAM_1            MEMORY_BASE_ADDRESS /* SDRAM Bank #1 */

#define PHYS_SDRAM_1_SIZE       SDRAM_BANK_SIZE  /* jeff */

//#define PHYS_SDRAM_2            0x40000000 /* SDRAM Bank #2 */

//#define PHYS_SDRAM_2_SIZE       SDRAM_BANK_SIZE  /* jeff */

#ifdef CONFIG_ENABLE_MMU

#define CFG_UBOOT_BASE 0xc3e00000

#else

#define CFG_UBOOT_BASE 0x43e00000

#endif

#define CONFIG_BOOTCOMMAND "movi read kernel C0008000; movi read rootfs 40B00000 180000; bootm C0008000 40B00000"

内核中的修改为：

1. MACHINE_START(SMDKV210, "SMDKV210")

.boot_params    = S5P_PA_SDRAM + 0x100,

arch/arm/mach-s5pv210/include/mach/map.h

#define S5P_PA_SDRAM           S5PV210_PA_SDRAM

#define S5PV210_PA_SDRAM        (0x40000000)

arch/arm/mach-s5pv210/include/mach/memory.h

#define PHYS_OFFSET         UL(0x40000000)

arch/arm/mach-s5pv210/Makefile.boot

zreladdr-y := 0x40008000

params_phys-y := 0x40000100