关闭

H264参数语法文档: SPS、PPS、IDR

1028人阅读 评论(0) 收藏 举报
分类:

http://blog.csdn.net/heanyu/article/details/6205390

H.264码流第一个 NALU 是 SPS(序列参数集Sequence Parameter Set)
对应H264标准文档 7.3.2.1 序列参数集的语法进行解析

SPS参数解析// fill sps with content of p
  1. int InterpretSPS (VideoParameters *p_Vid, DataPartition *p, seq_parameter_set_rbsp_t *sps)  
  2. {  
  3.   unsigned i;  
  4.   unsigned n_ScalingList;  
  5.   int reserved_zero;  
  6.   Bitstream *s = p->bitstream;  
  7.   
  8.   assert (p != NULL);  
  9.   assert (p->bitstream != NULL);  
  10.   assert (p->bitstream->streamBuffer != 0);  
  11.   assert (sps != NULL);  
  12.   
  13.   p_Dec->UsedBits = 0;  
  14.   
  15.   sps->profile_idc                            = u_v  (8, "SPS: profile_idc"                           , s);  
  16.   
  17.   if ((sps->profile_idc!=BASELINE       ) &&  
  18.       (sps->profile_idc!=MAIN           ) &&  
  19.       (sps->profile_idc!=EXTENDED       ) &&  
  20.       (sps->profile_idc!=FREXT_HP       ) &&  
  21.       (sps->profile_idc!=FREXT_Hi10P    ) &&  
  22.       (sps->profile_idc!=FREXT_Hi422    ) &&  
  23.       (sps->profile_idc!=FREXT_Hi444    ) &&  
  24.       (sps->profile_idc!=FREXT_CAVLC444 )  
  25. #if (MVC_EXTENSION_ENABLE)  
  26.       && (sps->profile_idc!=MVC_HIGH)  
  27.       && (sps->profile_idc!=STEREO_HIGH)  
  28. #endif  
  29.       )  
  30.   {  
  31.     printf("Invalid Profile IDC (%d) encountered. /n", sps->profile_idc);  
  32.     return p_Dec->UsedBits;  
  33.   }  
  34.   
  35.   sps->constrained_set0_flag                  = u_1  (   "SPS: constrained_set0_flag"                 , s);  
  36.   sps->constrained_set1_flag                  = u_1  (   "SPS: constrained_set1_flag"                 , s);  
  37.   sps->constrained_set2_flag                  = u_1  (   "SPS: constrained_set2_flag"                 , s);  
  38.   sps->constrained_set3_flag                  = u_1  (   "SPS: constrained_set3_flag"                 , s);  
  39. #if (MVC_EXTENSION_ENABLE)  
  40.   sps->constrained_set4_flag                  = u_1  (   "SPS: constrained_set4_flag"                 , s);  
  41.   reserved_zero                               = u_v  (3, "SPS: reserved_zero_3bits"                   , s);  
  42. #else  
  43.   reserved_zero                               = u_v  (4, "SPS: reserved_zero_4bits"                   , s);  
  44. #endif  
  45.   assert (reserved_zero==0);  
  46.   
  47.   sps->level_idc                              = u_v  (8, "SPS: level_idc"                             , s);  
  48.   
  49.   sps->seq_parameter_set_id                   = ue_v ("SPS: seq_parameter_set_id"                     , s);  
  50.   
  51.   // Fidelity Range Extensions stuff  
  52.   sps->chroma_format_idc = 1;  
  53.   sps->bit_depth_luma_minus8   = 0;  
  54.   sps->bit_depth_chroma_minus8 = 0;  
  55.   p_Vid->lossless_qpprime_flag   = 0;  
  56.   sps->separate_colour_plane_flag = 0;  
  57.   
  58.   if((sps->profile_idc==FREXT_HP   ) ||  
  59.      (sps->profile_idc==FREXT_Hi10P) ||  
  60.      (sps->profile_idc==FREXT_Hi422) ||  
  61.      (sps->profile_idc==FREXT_Hi444) ||  
  62.      (sps->profile_idc==FREXT_CAVLC444)  
  63. #if (MVC_EXTENSION_ENABLE)  
  64.      || (sps->profile_idc==MVC_HIGH)  
  65.      || (sps->profile_idc==STEREO_HIGH)  
  66. #endif  
  67.      )  
  68.   {  
  69.     sps->chroma_format_idc                      = ue_v ("SPS: chroma_format_idc"                       , s);  
  70.   
  71.     if(sps->chroma_format_idc == YUV444)  
  72.     {  
  73.       sps->separate_colour_plane_flag           = u_1  ("SPS: separate_colour_plane_flag"              , s);  
  74.     }  
  75.   
  76.     sps->bit_depth_luma_minus8                  = ue_v ("SPS: bit_depth_luma_minus8"                   , s);  
  77.     sps->bit_depth_chroma_minus8                = ue_v ("SPS: bit_depth_chroma_minus8"                 , s);  
  78.     //checking;  
  79.     if((sps->bit_depth_luma_minus8+8 > sizeof(imgpel)*8) || (sps->bit_depth_chroma_minus8+8> sizeof(imgpel)*8))  
  80.       error ("Source picture has higher bit depth than imgpel data type. /nPlease recompile with larger data type for imgpel.", 500);  
  81.   
  82.     p_Vid->lossless_qpprime_flag                  = u_1  ("SPS: lossless_qpprime_y_zero_flag"            , s);  
  83.   
  84.     sps->seq_scaling_matrix_present_flag        = u_1  (   "SPS: seq_scaling_matrix_present_flag"       , s);  
  85.       
  86.     if(sps->seq_scaling_matrix_present_flag)  
  87.     {  
  88.       n_ScalingList = (sps->chroma_format_idc != YUV444) ? 8 : 12;  
  89.       for(i=0; iseq_scaling_list_present_flag[i]   = u_1  (   "SPS: seq_scaling_list_present_flag"         , s);  
  90.         if(sps->seq_scaling_list_present_flag[i])  
  91.         {  
  92.           if(i<6) scaling_list="">ScalingList4x4[i], 16, &sps->UseDefaultScalingMatrix4x4Flag[i], s);  
  93.           else  
  94.             Scaling_List(sps->ScalingList8x8[i-6], 64, &sps->UseDefaultScalingMatrix8x8Flag[i-6], s);  
  95.         }  
  96.       }  
  97.     }  
  98.   }  
  99.   
  100.   sps->log2_max_frame_num_minus4              = ue_v ("SPS: log2_max_frame_num_minus4"                , s);  
  101.   sps->pic_order_cnt_type                     = ue_v ("SPS: pic_order_cnt_type"                       , s);  
  102.   
  103.   if (sps->pic_order_cnt_type == 0)  
  104.     sps->log2_max_pic_order_cnt_lsb_minus4 = ue_v ("SPS: log2_max_pic_order_cnt_lsb_minus4"           , s);  
  105.   else if (sps->pic_order_cnt_type == 1)  
  106.   {  
  107.     sps->delta_pic_order_always_zero_flag      = u_1  ("SPS: delta_pic_order_always_zero_flag"       , s);  
  108.     sps->offset_for_non_ref_pic                = se_v ("SPS: offset_for_non_ref_pic"                 , s);  
  109.     sps->offset_for_top_to_bottom_field        = se_v ("SPS: offset_for_top_to_bottom_field"         , s);  
  110.     sps->num_ref_frames_in_pic_order_cnt_cycle = ue_v ("SPS: num_ref_frames_in_pic_order_cnt_cycle"  , s);  
  111.     for(i=0; inum_ref_frames_in_pic_order_cnt_cycle; i++)  
  112.       sps->offset_for_ref_frame[i]               = se_v ("SPS: offset_for_ref_frame[i]"              , s);  
  113.   }  
  114.   sps->num_ref_frames                        = ue_v ("SPS: num_ref_frames"                         , s);  
  115.   sps->gaps_in_frame_num_value_allowed_flag  = u_1  ("SPS: gaps_in_frame_num_value_allowed_flag"   , s);  
  116.   sps->pic_width_in_mbs_minus1               = ue_v ("SPS: pic_width_in_mbs_minus1"                , s);  
  117.   sps->pic_height_in_map_units_minus1        = ue_v ("SPS: pic_height_in_map_units_minus1"         , s);  
  118.   sps->frame_mbs_only_flag                   = u_1  ("SPS: frame_mbs_only_flag"                    , s);  
  119.   if (!sps->frame_mbs_only_flag)  
  120.   {  
  121.     sps->mb_adaptive_frame_field_flag        = u_1  ("SPS: mb_adaptive_frame_field_flag"           , s);  
  122.   }  
  123.   sps->direct_8x8_inference_flag             = u_1  ("SPS: direct_8x8_inference_flag"              , s);  
  124.   sps->frame_cropping_flag                   = u_1  ("SPS: frame_cropping_flag"                    , s);  
  125.   
  126.   if (sps->frame_cropping_flag)  
  127.   {  
  128.     sps->frame_cropping_rect_left_offset      = ue_v ("SPS: frame_cropping_rect_left_offset"           , s);  
  129.     sps->frame_cropping_rect_right_offset     = ue_v ("SPS: frame_cropping_rect_right_offset"          , s);  
  130.     sps->frame_cropping_rect_top_offset       = ue_v ("SPS: frame_cropping_rect_top_offset"            , s);  
  131.     sps->frame_cropping_rect_bottom_offset    = ue_v ("SPS: frame_cropping_rect_bottom_offset"         , s);  
  132.   }  
  133.   sps->vui_parameters_present_flag           = (Boolean) u_1  ("SPS: vui_parameters_present_flag"      , s);  
  134.   
  135.   InitVUI(sps);  
  136.   ReadVUI(p, sps);  
  137.   
  138.   sps->Valid = TRUE;  
  139.   return p_Dec->UsedBits;  
  140. }  
H.264码流第二个 NALU 是 PPS(图像参数集Picture Parameter Set)
对应H264标准文档 7.3.2.2 序列参数集的语法进行解析
PPS参数解析
  1. int InterpretPPS (VideoParameters *p_Vid, DataPartition *p, pic_parameter_set_rbsp_t *pps)  
  2. {  
  3.   unsigned i;  
  4.   unsigned n_ScalingList;  
  5.   int chroma_format_idc;  
  6.   int NumberBitsPerSliceGroupId;  
  7.   Bitstream *s = p->bitstream;  
  8.   
  9.   assert (p != NULL);  
  10.   assert (p->bitstream != NULL);  
  11.   assert (p->bitstream->streamBuffer != 0);  
  12.   assert (pps != NULL);  
  13.   
  14.   p_Dec->UsedBits = 0;  
  15.   
  16.   pps->pic_parameter_set_id                  = ue_v ("PPS: pic_parameter_set_id"                   , s);  
  17.   pps->seq_parameter_set_id                  = ue_v ("PPS: seq_parameter_set_id"                   , s);  
  18.   pps->entropy_coding_mode_flag              = u_1  ("PPS: entropy_coding_mode_flag"               , s);  
  19.   
  20.   //! Note: as per JVT-F078 the following bit is unconditional.  If F078 is not accepted, then  
  21.   //! one has to fetch the correct SPS to check whether the bit is present (hopefully there is  
  22.   //! no consistency problem :-(  
  23.   //! The current encoder code handles this in the same way.  When you change this, don't forget  
  24.   //! the encoder!  StW, 12/8/02  
  25.   pps->bottom_field_pic_order_in_frame_present_flag                = u_1  ("PPS: bottom_field_pic_order_in_frame_present_flag"                 , s);  
  26.   
  27.   pps->num_slice_groups_minus1               = ue_v ("PPS: num_slice_groups_minus1"                , s);  
  28.   
  29.   // FMO stuff begins here  
  30.   if (pps->num_slice_groups_minus1 > 0)  
  31.   {  
  32.     pps->slice_group_map_type               = ue_v ("PPS: slice_group_map_type"                , s);  
  33.     if (pps->slice_group_map_type == 0)  
  34.     {  
  35.       for (i=0; i<=pps->num_slice_groups_minus1; i++)  
  36.         pps->run_length_minus1 [i]                  = ue_v ("PPS: run_length_minus1 [i]"              , s);  
  37.     }  
  38.     else if (pps->slice_group_map_type == 2)  
  39.     {  
  40.       for (i=0; inum_slice_groups_minus1; i++)  
  41.       {  
  42.         //! JVT-F078: avoid reference of SPS by using ue(v) instead of u(v)  
  43.         pps->top_left [i]                          = ue_v ("PPS: top_left [i]"                        , s);  
  44.         pps->bottom_right [i]                      = ue_v ("PPS: bottom_right [i]"                    , s);  
  45.       }  
  46.     }  
  47.     else if (pps->slice_group_map_type == 3 ||  
  48.              pps->slice_group_map_type == 4 ||  
  49.              pps->slice_group_map_type == 5)  
  50.     {  
  51.       pps->slice_group_change_direction_flag     = u_1  ("PPS: slice_group_change_direction_flag"      , s);  
  52.       pps->slice_group_change_rate_minus1        = ue_v ("PPS: slice_group_change_rate_minus1"         , s);  
  53.     }  
  54.     else if (pps->slice_group_map_type == 6)  
  55.     {  
  56.       if (pps->num_slice_groups_minus1+1 >4)  
  57.         NumberBitsPerSliceGroupId = 3;  
  58.       else if (pps->num_slice_groups_minus1+1 > 2)  
  59.         NumberBitsPerSliceGroupId = 2;  
  60.       else  
  61.         NumberBitsPerSliceGroupId = 1;  
  62.       pps->pic_size_in_map_units_minus1      = ue_v ("PPS: pic_size_in_map_units_minus1"               , s);  
  63.       if ((pps->slice_group_id = calloc (pps->pic_size_in_map_units_minus1+1, 1)) == NULL)  
  64.         no_mem_exit ("InterpretPPS: slice_group_id");  
  65.       for (i=0; i<=pps->pic_size_in_map_units_minus1; i++)  
  66.         pps->slice_group_id[i] = (byte) u_v (NumberBitsPerSliceGroupId, "slice_group_id[i]", s);  
  67.     }  
  68.   }  
  69.   
  70.   // End of FMO stuff  
  71.   
  72.   pps->num_ref_idx_l0_active_minus1          = ue_v ("PPS: num_ref_idx_l0_active_minus1"           , s);  
  73.   pps->num_ref_idx_l1_active_minus1          = ue_v ("PPS: num_ref_idx_l1_active_minus1"           , s);  
  74.   pps->weighted_pred_flag                    = u_1  ("PPS: weighted_pred_flag"                     , s);  
  75.   pps->weighted_bipred_idc                   = u_v  ( 2, "PPS: weighted_bipred_idc"                , s);  
  76.   pps->pic_init_qp_minus26                   = se_v ("PPS: pic_init_qp_minus26"                    , s);  
  77.   pps->pic_init_qs_minus26                   = se_v ("PPS: pic_init_qs_minus26"                    , s);  
  78.   
  79.   pps->chroma_qp_index_offset                = se_v ("PPS: chroma_qp_index_offset"                 , s);  
  80.   
  81.   pps->deblocking_filter_control_present_flag = u_1 ("PPS: deblocking_filter_control_present_flag" , s);  
  82.   pps->constrained_intra_pred_flag           = u_1  ("PPS: constrained_intra_pred_flag"            , s);  
  83.   pps->redundant_pic_cnt_present_flag        = u_1  ("PPS: redundant_pic_cnt_present_flag"         , s);  
  84.   
  85.   if(more_rbsp_data(s->streamBuffer, s->frame_bitoffset,s->bitstream_length)) // more_data_in_rbsp()  
  86.   {  
  87.     //Fidelity Range Extensions Stuff  
  88.     pps->transform_8x8_mode_flag           = u_1  ("PPS: transform_8x8_mode_flag"                , s);  
  89.     pps->pic_scaling_matrix_present_flag   =  u_1  ("PPS: pic_scaling_matrix_present_flag"        , s);  
  90.   
  91.     if(pps->pic_scaling_matrix_present_flag)  
  92.     {  
  93.       chroma_format_idc = p_Vid->SeqParSet[pps->seq_parameter_set_id].chroma_format_idc;  
  94.       n_ScalingList = 6 + ((chroma_format_idc != YUV444) ? 2 : 6) * pps->transform_8x8_mode_flag;  
  95.       for(i=0; ipic_scaling_list_present_flag[i]= u_1  ("PPS: pic_scaling_list_present_flag"          , s);  
  96.   
  97.         if(pps->pic_scaling_list_present_flag[i])  
  98.         {  
  99.           if(i<6) scaling_list="">ScalingList4x4[i], 16, &pps->UseDefaultScalingMatrix4x4Flag[i], s);  
  100.           else  
  101.             Scaling_List(pps->ScalingList8x8[i-6], 64, &pps->UseDefaultScalingMatrix8x8Flag[i-6], s);  
  102.         }  
  103.       }  
  104.     }  
  105.     pps->second_chroma_qp_index_offset      = se_v ("PPS: second_chroma_qp_index_offset"          , s);  
  106.   }  
  107.   else  
  108.   {  
  109.     pps->second_chroma_qp_index_offset      = pps->chroma_qp_index_offset;  
  110.   }  
  111.   
  112.   pps->Valid = TRUE;  
  113.   return p_Dec->UsedBits;  
  114. }  
H.264码流第三个 NALU 是 IDR(即时解码器刷新)
对应H264标准文档 7.3.3 序列参数集的语法进行解析

IDR参数解析
  1. case NALU_TYPE_IDR:  
  2.         img->idr_flag = (nalu->nal_unit_type == NALU_TYPE_IDR);  
  3.         img->nal_reference_idc = nalu->nal_reference_idc;  
  4.         img->disposable_flag = (nalu->nal_reference_idc == NALU_PRIORITY_DISPOSABLE);  
  5.         currSlice->dp_mode = PAR_DP_1;   //++ dp_mode:数据分割模式;PAR_DP_1=0:没有数据分割  
  6.         currSlice->max_part_nr = 1;  
  7.         currSlice->ei_flag = 0;  //++ 该处赋值直接影响decode_slice()函数中对decode_one_slice()函数的调用  
  8.                                     //++ 该值不为0,表明当前片出错,解码程序将忽略当前片的解码过程,而使用错误隐藏  
  9.         currStream = currSlice->partArr[0].bitstream;  
  10.         currStream->ei_flag = 0; //++ 此处的赋值为最终赋值,以后不再改变。该值将对每个宏块的ei_flag产生影响  
  11.                                     //++ 参见macroblock.c文件read_one_macroblock()函数的如下语句:  
  12.                                     //++        :if(!dP->bitstream->ei_flag)      :currMB->ei_flag = 0;  
  13.                                     //++ 该值还在macroblock.c文件if(IS_INTRA (currMB) && dP->bitstream->ei_flag && img->number)中用到  
  14.         currStream->frame_bitoffset = currStream->read_len = 0;  
  15.         memcpy (currStream->streamBuffer, &nalu->buf[1], nalu->len-1);  
  16.         currStream->code_len = currStream->bitstream_length = RBSPtoSODB(currStream->streamBuffer, nalu->len-1);  
  17.   
  18.         // Some syntax of the Slice Header depends on the parameter set, which depends on  
  19.         // the parameter set ID of the SLice header.  Hence, read the pic_parameter_set_id  
  20.         // of the slice header first, then setup the active parameter sets, and then read  
  21.         // the rest of the slice header  
  22.         BitsUsedByHeader = FirstPartOfSliceHeader();    //++ 参见标准7.3.3  
  23.         UseParameterSet (currSlice->pic_parameter_set_id);  
  24.         BitsUsedByHeader+= RestOfSliceHeader ();    //++ 参见标准7.3.3  
  25.         //++ BitsUsedByHeader在程序中没有实际用处,而且BitsUsedByHeader+= RestOfSliceHeader ()  
  26.         //++ 重复计算了FirstPartOfSliceHeader()所用到的比特数。因为在FirstPartOfSliceHeader()  
  27.         //++ 之后,变量UsedBits值并未被置零就代入RestOfSliceHeader()运算,从而RestOfSliceHeader ()  
  28.         //++ 在返回时,BitsUsedByHeader+= RestOfSliceHeader()多加了一个BitsUsedByHeader值  
  29.   
  30.         FmoInit (active_pps, active_sps);  
  31.   
  32.         if(is_new_picture())  
  33.         {  
  34.           init_picture(img, input);  
  35.             
  36.           current_header = SOP;  
  37.           //check zero_byte if it is also the first NAL unit in the access unit  
  38.           CheckZeroByteVCL(nalu, &ret);  
  39.         }  
  40.         else  
  41.           current_header = SOS;  
  42.     
  43.         init_lists(img->type, img->currentSlice->structure);  
  44.         reorder_lists (img->type, img->currentSlice);  
  45.   
  46.         if (img->structure==FRAME)  
  47.         {  
  48.           init_mbaff_lists();  
  49.         }  
  50.   
  51. /*        if (img->frame_num==1) // write a reference list 
  52.         { 
  53.           count ++; 
  54.           if (count==1) 
  55.             for (i=0; i 
  56.  
  57.         // From here on, active_sps, active_pps and the slice header are valid 
  58.         if (img->MbaffFrameFlag) 
  59.           img->current_mb_nr = currSlice->start_mb_nr << 1="" style="color: #0000ff">else 
  60.           img->current_mb_nr = currSlice->start_mb_nr; 
  61.  
  62.         if (active_pps->entropy_coding_mode_flag) 
  63.         { 
  64.           int ByteStartPosition = currStream->frame_bitoffset/8; 
  65.           if (currStream->frame_bitoffset%8 != 0)  
  66.           { 
  67.             ByteStartPosition++; 
  68.           } 
  69.           arideco_start_decoding (&currSlice->partArr[0].de_cabac, currStream->streamBuffer, ByteStartPosition, &currStream->read_len, img->type); 
  70.         } 
  71. // printf ("read_new_slice: returning %s/n", current_header == SOP?"SOP":"SOS"); 
  72.         FreeNALU(nalu); 
  73.         return current_header; 
  74.         break; 
  75.       case NALU_TYPE_DPA: 
  76.         //! The state machine here should follow the same ideas as the old readSliceRTP() 
  77.         //! basically: 
  78.         //! work on DPA (as above) 
  79.         //! read and process all following SEI/SPS/PPS/PD/Filler NALUs 
  80.         //! if next video NALU is dpB,  
  81.         //!   then read and check whether it belongs to DPA, if yes, use it 
  82.         //! else 
  83.         //!   ;   // nothing 
  84.         //! read and process all following SEI/SPS/PPS/PD/Filler NALUs 
  85.         //! if next video NALU is dpC 
  86.         //!   then read and check whether it belongs to DPA (and DPB, if present), if yes, use it, done 
  87.         //! else 
  88.         //!   use the DPA (and the DPB if present) 
  89.  
  90.         /*  
  91.             LC: inserting the code related to DP processing, mainly copying some of the parts 
  92.             related to NALU_TYPE_SLICE, NALU_TYPE_IDR. 
  93.         */  
  94.   
  95.         if(expected_slice_type != NALU_TYPE_DPA)  
  96.         {  
  97.           /* oops... we found the next slice, go back! */  
  98.           fseek(bits, ftell_position, SEEK_SET);  
  99.           FreeNALU(nalu);  
  100.           return current_header;  
  101.         }  
  102.   
  103.         img->idr_flag          = (nalu->nal_unit_type == NALU_TYPE_IDR);  
  104.         img->nal_reference_idc = nalu->nal_reference_idc;  
  105.         img->disposable_flag   = (nalu->nal_reference_idc == NALU_PRIORITY_DISPOSABLE);  
  106.         currSlice->dp_mode     = PAR_DP_3;  
  107.         currSlice->max_part_nr = 3;  
  108.         currSlice->ei_flag     = 0;  
  109.         currStream             = currSlice->partArr[0].bitstream;  
  110.         currStream->ei_flag    = 0;  
  111.         currStream->frame_bitoffset = currStream->read_len = 0;  
  112.         memcpy (currStream->streamBuffer, &nalu->buf[1], nalu->len-1);  
  113.         currStream->code_len = currStream->bitstream_length = RBSPtoSODB(currStream->streamBuffer, nalu->len-1);    //++ 剔除停止比特和填充比特  
  114.           
  115.         BitsUsedByHeader     = FirstPartOfSliceHeader();  
  116.         UseParameterSet (currSlice->pic_parameter_set_id);  
  117.         BitsUsedByHeader    += RestOfSliceHeader ();  
  118.           
  119.         FmoInit (active_pps, active_sps);  
  120.   
  121.         if(is_new_picture())  
  122.         {  
  123.           init_picture(img, input);  
  124.           current_header = SOP;  
  125.           CheckZeroByteVCL(nalu, &ret);  
  126.         }  
  127.         else  
  128.           current_header = SOS;  
  129.   
  130.           
  131.         init_lists(img->type, img->currentSlice->structure);  
  132.         reorder_lists (img->type, img->currentSlice);  
  133.           
  134.         if (img->structure==FRAME)  
  135.         {  
  136.           init_mbaff_lists();  
  137.         }  
  138.   
  139.         // From here on, active_sps, active_pps and the slice header are valid  
  140.         if (img->MbaffFrameFlag)  
  141.           img->current_mb_nr = currSlice->start_mb_nr << 1="" style="color: #0000ff">else  
  142.    
  143.          img->current_mb_nr = currSlice->start_mb_nr;  
  144.   
  145.   
  146.         /*  
  147.            LC: 
  148.               Now I need to read the slice ID, which depends on the value of  
  149.               redundant_pic_cnt_present_flag (pag.49).  
  150.         */  
  151.   
  152.         slice_id_a  = ue_v("NALU:SLICE_A slice_idr", currStream);  
  153.         if (active_pps->entropy_coding_mode_flag)  
  154.         {  
  155.           int ByteStartPosition = currStream->frame_bitoffset/8;  
  156.           if (currStream->frame_bitoffset%8 != 0)   
  157.           {  
  158.             ByteStartPosition++;  
  159.           }  
  160.           arideco_start_decoding (&currSlice->partArr[0].de_cabac, currStream->streamBuffer, ByteStartPosition, &currStream->read_len, img->type);  
  161.         }  
  162. // printf ("read_new_slice: returning %s/n", current_header == SOP?"SOP":"SOS");  
  163.         break;  
  164.       case NALU_TYPE_DPB:  
  165.         /* LC: inserting the code related to DP processing */  
  166.   
  167.         currStream             = currSlice->partArr[1].bitstream;  
  168.         currStream->ei_flag    = 0;  
  169.         currStream->frame_bitoffset = currStream->read_len = 0;  
  170.         memcpy (currStream->streamBuffer, &nalu->buf[1], nalu->len-1);  
  171.         currStream->code_len = currStream->bitstream_length = RBSPtoSODB(currStream->streamBuffer, nalu->len-1);  
  172.   
  173.         slice_id_b  = ue_v("NALU:SLICE_B slice_idr", currStream);  
  174.         if (active_pps->redundant_pic_cnt_present_flag)  
  175.           redundant_pic_cnt_b = ue_v("NALU:SLICE_B redudand_pic_cnt", currStream);  
  176.         else  
  177.           redundant_pic_cnt_b = 0;  
  178.           
  179.         /*  LC: Initializing CABAC for the current data stream. */  
  180.   
  181.         if (active_pps->entropy_coding_mode_flag)  
  182.         {  
  183.           int ByteStartPosition = currStream->frame_bitoffset/8;  
  184.           if (currStream->frame_bitoffset % 8 != 0)   
  185.             ByteStartPosition++;  
  186.             
  187.           arideco_start_decoding (&currSlice->partArr[1].de_cabac, currStream->streamBuffer,   
  188.             ByteStartPosition, &currStream->read_len, img->type);  
  189.             
  190.         }  
  191.   
  192.         /* LC: resilience code to be inserted */  
  193.         /*         FreeNALU(nalu); */  
  194.         /*         return current_header; */  
  195.   
  196.         break;  
IDR参数解析/*!
  1. <pre name="code" class="cpp"> ************************************************************************  
  2.  * /brief  
  3.  *    read the first part of the header (only the pic_parameter_set_id)  
  4.  * /return  
  5.  *    Length of the first part of the slice header (in bits)  
  6.  ************************************************************************  
  7.  */  
  8. //++ 参见标准7.3.3  
  9. int FirstPartOfSliceHeader()  
  10. {  
  11.   Slice *currSlice = img->currentSlice;  
  12.   int dP_nr = assignSE2partition[currSlice->dp_mode][SE_HEADER];  
  13.   DataPartition *partition = &(currSlice->partArr[dP_nr]);  
  14.   Bitstream *currStream = partition->bitstream;  
  15.   int tmp;  
  16.   
  17.   UsedBits= partition->bitstream->frame_bitoffset; // was hardcoded to 31 for previous start-code. This is better.  
  18.   
  19.   // Get first_mb_in_slice  
  20.   currSlice->start_mb_nr = ue_v ("SH: first_mb_in_slice", currStream);  
  21.   
  22.   tmp = ue_v ("SH: slice_type", currStream);  
  23.     
  24.   if (tmp>4) tmp -=5;  
  25.   
  26.   img->type = currSlice->picture_type = (SliceType) tmp;  
  27.   
  28.   currSlice->pic_parameter_set_id = ue_v ("SH: pic_parameter_set_id", currStream);  
  29.     
  30.   return UsedBits;  
  31. }  
  32. </pre><br><br>  

0
0

查看评论
* 以上用户言论只代表其个人观点,不代表CSDN网站的观点或立场
    个人资料
    • 访问:810400次
    • 积分:12459
    • 等级:
    • 排名:第1112名
    • 原创:464篇
    • 转载:275篇
    • 译文:0篇
    • 评论:38条
    我的私人邮箱,欢迎大家交流.
    zlx1318@163.com
    最新评论