U-BOOT移植过程详解: 附录

申明

  本着学习交流的原则, 将个人移植u-boot的过程做一个记录. 文章参考了csdn blog里面的很多内容, 有的已经记不得出处了, 只好把当时的摘要直接贴出来. 如果冒犯, 还请见谅. 如有侵权, 请与我邮件联系. 谢谢!

autoconf.mk

uboot的顶层Makefile中有如下的一段代码

#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
	@$(XECHO) Generating $@ ; \
	set -e ; \
	: Generate the dependancies ; \
	$(CC) -x c -DDO_DEPS_ONLY -M $(CFLAGS) $(CPPFLAGS) \
		-MQ $(obj)include/autoconf.mk include/common.h > $@

$(obj)include/autoconf.mk: $(obj)include/config.h
	@$(XECHO) Generating $@ ; \
	set -e ; \
	: Extract the config macros ; \
	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
		sed -n -f tools/scripts/define2mk.sed > [email protected] && \
	mv [email protected] $@

先看第一个:  $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h , 它表示autoconf.mk.dep依赖于config.h和common.h这两个文件.

• @$(XECHO) Generating $@ ; \ 这句话会在编译阶段输出编译信息 Generating include/autoconf.mk.dep
  
• set -e ; \ 这句话表示, 当下面命令返回值不会0时, 整个脚本立即停止退出
  
• : Generate the dependa