全志的gpio如何算个数

A 0-31     B 32-63     C 64-95    D 96-127  以此类推... (每个字母是32个)

举个例子: gpio PD19  也就是 96+19= 115

; port configuration:
; port_name = port:GPIO<mux><pull up/down><driver level><default value>
; mux: GPIO function configuration, 0-input, 1-output, 2+: special funciton for modules
; pull up/down: 1-pull up, 2-pull down
; driver level: 0,1,2,3. 2 is recommended
; default value: default output value when this IO is configured as an output IO


vip_dev0_flash_en        = port:PD20<1><default><default><1>
vip_dev0_flash_mode      = port:PH01<2><0><default><default>


gpio_set_value(ifx_dev->gpio.reset, 1);