Linux 挂载iscsi存储磁盘设备

原创 2015年07月07日 22:02:53

 

1check网络

[root@localhost ~]# ping -I eth0 11.110.10.138

PING 11.110.10.138 (11.110.10.138) from 11.110.10.138eth0: 56(84) bytes of data.

64 bytes from 11.110.10.138: icmp_seq=1ttl=64 time=0.023 ms

64 bytes from 11.110.10.138: icmp_seq=2ttl=64 time=0.016 ms

64 bytes from 11.110.10.138: icmp_seq=3ttl=64 time=0.018 ms

^C

--- 11.110.10.138 ping statistics ---

3 packets transmitted, 3 received, 0%packet loss, time 2186ms

rtt min/avg/max/mdev =0.016/0.019/0.023/0.003 ms

[root@localhost ~]#

 

 

 

[root@localhost ~]# ping -I eth0192.168.180.138

PING 192.168.180.138 (192.168.180.138) from11.110.10.138 eth0: 56(84) bytes of data.

From 11.110.10.138 icmp_seq=2 DestinationHost Unreachable

From 11.110.10.138 icmp_seq=3 DestinationHost Unreachable

From 11.110.10.138 icmp_seq=4 DestinationHost Unreachable

^C

--- 192.168.180.138 ping statistics ---

4 packets transmitted, 0 received, +3errors, 100% packet loss, time 3729ms

pipe 3

[root@localhost ~]#

 

 

2,检测软件是否已经安装

[root@localhost ~]# rpm -qa |grep iscsi

iscsi-initiator-utils-6.2.0.873-2.0.2.el6.x86_64

[root@localhost ~]#

 

 <版权所有,文章允许转载,但必须以链接方式注明源地址,否则追究法律责任!> 
原博客地址:  http://blog.csdn.net/mchdba/article/details/46794809
原作者:黄杉 (mchdba)

3,检查ISCSI服务是否启动了和当前级别下的运行情况

[root@localhost ~]# service iscsi status

......

 

 

 

 

 

4,要建立2个文件

[root@localhost ~]# iscsiadm -m iface -Iiscsi_eth0 --op=new

New interface iscsi_eth0 added

[root@localhost ~]# iscsiadm -m iface -Iiscsi_eth1 --op=new

New interface iscsi_eth1 added

[root@localhost ~]#

 

 

5.建立iscsi_eth0eht0的映射关系。同时建立iscsi_eth1eth1的映射关系.

也可以直接编辑iscsi_eth0和iscsi_eth1文件,把里面的iface.net_ifacename=default改成

iface.net_ifacename=eth0和iface.net_ifacename=eth1即可。

[root@localhost ~]# ls/var/lib/iscsi/ifaces/

iscsi_eth0 iscsi_eth1  iscsi_the0  iscsi_the1

[root@localhost ~]# cd/var/lib/iscsi/ifaces/

[root@localhost ifaces]# ll

总用量 16

-rw------- 1 root root 197 6月  10 16:05 iscsi_eth0

-rw------- 1 root root 197 6月  10 16:06 iscsi_eth1

-rw------- 1 root root 197 4月   3 19:14 iscsi_the0

-rw------- 1 root root 197 4月   3 19:14 iscsi_the1

[root@localhost ifaces]# cat iscsi_eth0

# BEGIN RECORD 6.2.0-873.2.el6

iface.iscsi_ifacename = iscsi_eth0

iface.transport_name = tcp

iface.vlan_id = 0

iface.vlan_priority = 0

iface.iface_num = 0

iface.mtu = 0

iface.port = 0

# END RECORD

[root@localhost ifaces]#

[root@localhost ifaces]# iscsiadm -m iface-I iscsi_eth0 --op=update -n iface.net_ifacename -v eth0

iscsi_eth0 updated.

[root@localhost ifaces]# iscsiadm -m iface-I iscsi_eth0 --op=update -n iface.net_ifacename -v eth0

iscsi_eth0 updated.

[root@localhost ifaces]#

 

 

 

6,重启iscsi服务

[root@localhost ifaces]# service iscsi restart

停止 iscsi:                                              [确定]

正在启动 iscsi:                                           [确定]

[root@localhost ifaces]#

 

Equallogic配置部分

 

7.配置Equallogic,映射一个Lun名字为redhat,大小3G的空间

在存储访问网站上,去分配新的磁盘块,这个比较简单,就不截图了,存储设备都会自带一个网址让我们访问的。

 

 

Redhat配置部分

8.discover,可以发现已经看到了redhatlun。因为有两条路径,所有显示了两行。

 

[root@localhost ifaces]# iscsiadm -mdiscovery -t sendtargets -p 11.110.10.138:3260

iscsiadm: cannot make connection to 11.110.10.138:Connection refused

 

iscsiadm: cannot make connection to 11.110.10.138:Connection refused

iscsiadm: cannot make connection to 11.110.10.138:Connection refused

iscsiadm: cannot make connection to 11.110.10.138:Connection refused

^Ciscsiadm: caught SIGINT, exiting...

[root@localhost ifaces]#

 

ip地址是存储的ip地址

[root@localhost ifaces]# iscsiadm -mdiscovery -t sendtargets -p 11.110.10.22 :3260

iscsiadm: This command will remove therecord [iface: default, target:iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata, portal: 11.110.10.22,3260],but a session is using it. Logout session then rerun command to remove record.

iscsiadm: This command will remove therecord [iface: default, target:iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2, portal:11.110.10.22,3260], but a session is using it. Logout session then reruncommand to remove record.

11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata

11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2

11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3

11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata

11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2

11.110.10.22:3260,1 iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3

11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata

11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2

11.110.10.22:3260,1 iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3

11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata

11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2

11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3

[root@localhost ifaces]#

 

 

9.Log on所有的iscsi session,可以看到最后两个successfulredhat lun,已经log on成功了。

[root@localhost ifaces]# iscsiadm -m node-l

Logging in to [iface: iscsi_eth1, target:iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata, portal: 11.110.10.22,3260](multiple)

Logging in to [iface: iscsi_eth0, target:iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata, portal: 11.110.10.22,3260](multiple)

Logging in to [iface: iscsi_the1, target:iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata, portal: 11.110.10.22,3260](multiple)

Logging in to [iface: iscsi_the0, target:iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata, portal: 11.110.10.22,3260](multiple)

Logging in to [iface: iscsi_eth1, target:iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2, portal:11.110.10.22,3260] (multiple)

Logging in to [iface: iscsi_eth0, target:iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2, portal:11.110.10.22,3260] (multiple)

Logging in to [iface: iscsi_the1, target:iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2, portal:11.110.10.22,3260] (multiple)

Logging in to [iface: iscsi_the0, target:iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2, portal:11.110.10.22,3260] (multiple)

Logging in to [iface: iscsi_eth1, target:iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3, portal:11.110.10.22,3260] (multiple)

Logging in to [iface: iscsi_eth0, target:iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3, portal:11.110.10.22,3260] (multiple)

Logging in to [iface: iscsi_the1, target:iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3, portal:11.110.10.22,3260] (multiple)

Logging in to [iface: iscsi_the0, target:iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3, portal:11.110.10.22,3260] (multiple)

Login to [iface: iscsi_eth1, target:iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata, portal: 11.110.10.22,3260]successful.

Login to [iface: iscsi_eth0, target:iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata, portal: 11.110.10.22,3260]successful.

Login to [iface: iscsi_the1, target:iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata, portal: 11.110.10.22,3260]successful.

Login to [iface: iscsi_the0, target:iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata, portal: 11.110.10.22,3260]successful.

Login to [iface: iscsi_eth1, target:iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2, portal:11.110.10.22,3260] successful.

Login to [iface: iscsi_eth0, target:iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2, portal:11.110.10.22,3260] successful.

Login to [iface: iscsi_the1, target:iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2, portal:11.110.10.22,3260] successful.

Login to [iface: iscsi_the0, target:iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2, portal:11.110.10.22,3260] successful.

Login to [iface: iscsi_eth1, target:iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3, portal:11.110.10.22,3260] successful.

Login to [iface: iscsi_eth0, target:iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3, portal:11.110.10.22,3260] successful.

Login to [iface: iscsi_the1, target:iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3, portal:11.110.10.22,3260] successful.

Login to [iface: iscsi_the0, target:iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3, portal:11.110.10.22,3260] successful.

[root@localhost ifaces]#

 

 

 

10:输入iscsiadm -m session可以看到当前正在连接的session.

[root@localhost ifaces]# iscsiadm -msession

tcp: [10] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2

tcp: [11] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2

tcp: [12] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2

tcp: [13] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3

tcp: [14] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3

tcp: [15] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3

tcp: [16] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6591f7f09-cf5248cfafa5577e-pddata3

tcp: [3] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata

tcp: [4] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2

tcp: [5] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata

tcp: [6] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata

tcp: [7] 11.110.10.22:3260,1 iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata

tcp: [8] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-6dac38009-c1b1cac2d434efec-pddata

tcp: [9] 11.110.10.22:3260,1iqn.2001-05.com.equallogic:0-8a0906-4061f7f09-29d248cfaed54b9d-pddata2

[root@localhost ifaces]#

 

 

配置MPIO

11.因为有多条路径,所有我们需要配置MPIO,查看当前是否安装了MPIO软件。通过查看已经安装了。

[root@localhost ifaces]# rpm -qadevice-mapper

device-mapper-1.02.77-9.el6.x86_64

[root@localhost ifaces]#

 

 

[root@localhost ifaces]# chkconfig --listmultipathd

在 multipathd 服务中读取信息时出错:没有那个文件或目录

[root@localhost ifaces]#

 

 

12通过查看,MPIO服务在当前级别下没有开,我们启用它。

[root@localhost ifaces]# chkconfig --listmultipathd

multipathd          0:关闭      1:关闭      2:关闭      3:关闭      4:关闭      5:关闭      6:关闭

[root@localhost ifaces]#

[root@localhost ifaces]# chkconfigmultipathd on

[root@localhost ifaces]#

[root@localhost ifaces]#

[root@localhost ifaces]# chkconfig --listmultipathd

multipathd          0:关闭      1:关闭      2:启用      3:启用      4:启用      5:启用      6:关闭

[root@localhost ifaces]#

 

14.我们需要找到/etc/multipath.conf文件中的如下3行,把前面加上#把他们注释掉。

# Blacklist all devices by default. Removethis to enable multipathing

# on the default devices.

blacklist {

       devnode "*"

}

 

 

15.重启multipathd服务,通过查看,可以看到我们做的那个3GLUN信息了。

[root@localhost ifaces]# service  multipathd restart

正在关闭multipathd 端口监控程序:                          [失败]

正在启动守护进程multipathd:/sbin/multipathd: error while loading shared libraries:libsysfs.so.2: cannot open shared object file: No such file or directory

                                                          [失败]

[root@localhost ifaces]#

 在/etc/ld.so.conf中加一行/usr/local/lib,.然后运行/sbin/ldconfig,文件解决,

 

 [root@localhost ifaces]# find / -namelibsysfs.so.2

[root@localhost ifaces]#

 

没有此文件,所以yum安装下

 [root@localhost ifaces]# yum install -ylibsysfs*

 

 [root@localhost ifaces]# service  multipathd restart

正在关闭multipathd 端口监控程序:                          [失败]

正在启动守护进程multipathd:/sbin/multipathd: error while loading shared libraries:libreadline.so.5: cannot open shared object file: No such file or directory

                                                          [失败]

[root@localhost ifaces]#

 

需要安装 readline-5.2.tar.gz,下载地址为:http://pan.baidu.com/s/1jGnFN3S

 

 安装为

 tar-xvf readline-5.2.tar.gz

 cdreadline-5.2

 ./configure

 make

 makeinstall

 

[root@localhost ifaces]# yum install -ylibreadline*

 

去/etc/ld.so.conf添加进lib目录即可

[root@localhost readline-5.2]# cp/etc/ld.so.conf /etc/ld.so.conf.backup

[root@localhost readline-5.2]# vim/etc/ld.so.conf

include ld.so.conf.d/*.conf

/usr/local/lib

[root@localhost readline-5.2]# ldconfig

[root@localhost readline-5.2]#

[root@localhost readline-5.2]#

[root@localhost readline-5.2]# servicemultipathd restart

正在关闭multipathd 端口监控程序:                          [失败]

正在启动守护进程multipathd:                               [确定]

[root@localhost readline-5.2]#

 

[root@localhost readline-5.2]# multipathd-ll

[root@localhost readline-5.2]#

why?这里没有别的信息呢?为什么没有显示出新分配的那个磁盘的信息呢?

 

 

 

16.继续编辑/etc/multipath.conf,我们给这个3GLUN起个可以自己命名的名字。

通过multipath –ll,我们可以得到这个3G LUN的WWID: 360c090c2f903ac4a89c2e40000006000

把如图前面的#去掉,同时把wwid改成360c090c2f903ac4a89c2e40000006000。Alias改成 pddata3.

multipaths {

       multipath {

                wwid                   3600508b4000156d700012000000b0000

                alias                   pddata3

                path_grouping_policy    multibus

                path_checker            readsector0

                path_selector           "round-robin 0"

                failback                manual

                rr_weight               priorities

                no_path_retry           5

       }

 

17.重启multipathd服务,可以看到我们命名的pddata3出来了。

service multipathd restart

why ? 没有看到pddata3

 

 

19.格式化 pddata3

[root@localhost readline-5.2]# ls /dev/sdp

/dev/sdp

[root@localhost readline-5.2]#

 

ext3太土鳖了,所以采用xfs文件格式

[root@localhost readline-5.2]# yum install-y xfsprogs

[root@localhost readline-5.2]# sudo fdisk/dev/sdp

Device contains neither a valid DOSpartition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with diskidentifier 0xd45833b8.

Changes will remain in memory only, untilyou decide to write them.

After that, of course, the previous contentwon't be recoverable.

 

Warning: invalid flag 0x0000 of partitiontable 4 will be corrected by w(rite)

 

WARNING: DOS-compatible mode is deprecated.It's strongly recommended to

        switch off the mode (command 'c') and change display units to

        sectors (command 'u').

 

Command (m for help): m

Command action

  a   toggle a bootable flag

  b   edit bsd disklabel

  c   toggle the dos compatibilityflag

  d   delete a partition

  l   list known partition types

  m   print this menu

  n   add a new partition

  o   create a new empty DOSpartition table

  p   print the partition table

  q   quit without saving changes

  s   create a new empty Sundisklabel

  t   change a partition's system id

  u   change display/entry units

  v   verify the partition table

  w   write table to disk and exit

  x   extra functionality (expertsonly)

 

Command (m for help): n

Command action

  e   extended

  p   primary partition (1-4)

p

Partition number (1-4): 1

First cylinder (1-104434, default 1):

Using default value 1

Last cylinder, +cylinders or +size{K,M,G}(1-104434, default 104434):

Using default value 104434

 

Command (m for help): w

The partition table has been altered!

 

Calling ioctl() to re-read partition table.

Syncing disks.

[root@localhost readline-5.2]#

 

接下来,格式化分区为XFS,使用mkfs.xfs命令。如果已有其他文件系统创建在此分区,必须加上"-f"参数来覆盖它。

[root@localhost readline-5.2]# sudo mkfs.xfs-f /dev/sdp1

meta-data=/dev/sdp1              isize=256    agcount=4, agsize=52429130 blks

        =                      sectsz=512   attr=2, projid32bit=1

        =                       crc=0

data    =                      bsize=4096   blocks=209716518,imaxpct=25

        =                      sunit=0      swidth=0 blks

naming  =version 2             bsize=4096   ascii-ci=0

log     =internal log          bsize=4096   blocks=102400,version=2

        =                      sectsz=512   sunit=0 blks,lazy-count=1

realtime =none                   extsz=4096   blocks=0, rtextents=0

[root@localhost readline-5.2]#

 

 

18,建立新目录/pddata3,以此挂载新的磁盘

至此你已经准备好格式化后分区来挂载。假设/pddata3 是XFS本地挂载点。使用下述命令挂载:

 sudomount -t xfs /dev/sdp1 /pddata3

[root@localhost readline-5.2]# mkdir/pddata3

[root@localhost readline-5.2]#  sudo mount -t xfs /dev/sdp1 /pddata2

[root@localhost readline-5.2]#

[root@localhost readline-5.2]# df -h

文件系统               容量  已用  可用 已用%% 挂载点

/dev/mapper/VolGroup-lv_root

                       50G   33G  15G  70% /

tmpfs                 8.9G  3.3G 5.7G  37% /dev/shm

 

/dev/sda2             485M   76M 384M  17% /boot

/dev/sda1             200M  260K 200M   1% /boot/efi

/dev/mapper/VolGroup-lv_home

                       76G   50G  22G  70% /home

/dev/sdc             1008G  380G 578G  40% /data

/dev/sdp1             800G   33M 800G   1% /pddata2

[root@localhost readline-5.2]#

 

 

参考地址:http://www.jb51.net/LINUXjishu/248321.html

 

 

 


版权声明:本文为博主原创文章,未经博主允许不得转载。 举报

相关文章推荐

Linux挂载iscsi存储的方式

Linux挂载iscsi存储的方式 iscsi 提供给Linux挂载有两种方式,一种通过iscsi 协议的ip映射,一种通过文件共享 nfs挂载。其中通过iscsi 协议的ip映射 方式挂载到Linu...

linux iscsi 配置过程详解--包括自动挂载文件系统

标签:  ip-san   linux   文件系统   it 分类: 存储 1  指定连接iSCSI的前兆网口IP, 与IP-SAN的端...

精选:深入理解 Docker 内部原理及网络配置

网络绝对是任何系统的核心,对于容器而言也是如此。Docker 作为目前最火的轻量级容器技术,有很多令人称道的功能,如 Docker 的镜像管理。然而,Docker的网络一直以来都比较薄弱,所以我们有必要深入了解Docker的网络知识,以满足更高的网络需求。

使用iSCSI存储时报错(openfiler模拟)

[root@single Packages]# iscsiadm -m discovery -t st -p 192.168.188.2 iscsiadm: cannot make connectio...

详解Linux配置iSCSI方法

详解Linux配置iSCSI方法 2010-01-08 10:11  来源:Watchstor.com    http://tech.watchstor.com/storage-module...

Linux_ISCSI服务器

目录目录 网络存储 ISCSI How to setup ISCSI server SCSI Commands Server Side Client Side Edit the ISCSI confi...
  • Jmilk
  • Jmilk
  • 2015-11-26 21:27
  • 709

Linux——iscsiadm基本用法

1、存储介质 1)磁盘阵列:磁盘阵列是一种采用RAID技术、冗余技术和在线维护技术制造的一种高性能、高可用的磁盘存储设备。 2)IP-SAN存储:SAN (Storage Area Network...

iSCSI CHAP认证不完全攻略

原创文章,欢迎转载,转载时请务必给出原文链接,谢谢!http://blog.csdn.net/sinchb/article/details/8433994#t10 一、 什么是CHAP? Chal...
  • Sinchb
  • Sinchb
  • 2012-12-25 16:27
  • 13035

linux后台执行命令:&和nohup

当我们在终端或控制台工作时,可能不希望由于运行一个作业而占住了屏幕,因为可能还有更重要的事情要做,比如阅读电子邮件。对于密集访问磁盘的进程,我们更希望它能够在每天的非负荷高峰时间段运行(例如凌晨)。为...

linux下挂载ISCSI存储设备

安装 首先要在存储设备上做好RAID,设置好iSCSI 目标方(target)。 这里主要说明iSCSI initiator的安装。 不同的操作系统对应各自的iSCSI initiator,以R...
返回顶部
收藏助手
不良信息举报
您举报文章:深度学习:神经网络中的前向传播和反向传播算法推导
举报原因:
原因补充:

(最多只允许输入30个字)