原文:http://coolxing.iteye.com/blog/1236696
问题的描述
启动3个线程打印递增的数字, 线程1先打印1,2,3,4,5, 然后是线程2打印6,7,8,9,10, 然后是线程3打印11,12,13,14,15. 接着再由线程1打印16,17,18,19,20....以此类推, 直到打印到75. 程序的输出结果应该为:
线程1: 1
线程1: 2
线程1: 3
线程1: 4
线程1: 5
线程2: 6
线程2: 7
线程2: 8
线程2: 9
线程2: 10
...
线程3: 71
线程3: 72
线程3: 73
线程3: 74
线程3: 75
解法一: 采用原始的synchronized, wait(), notify(), notifyAll()等方式控制线程.
- public class NumberPrintDemo {
- // n为即将打印的数字
- private static int n = 1;
- // state=1表示将由线程1打印数字, state=2表示将由线程2打印数字, state=3表示将由线程3打印数字
- private static int state = 1;
- public static void main(String[] args) {
- final NumberPrintDemo pn = new NumberPrintDemo();
- new Thread(new Runnable() {
- public void run() {
- // 3个线程打印75个数字, 单个线程每次打印5个连续数字, 因此每个线程只需执行5次打印任务. 3*5*5=75
- for (int i = 0; i < 5; i++) {
- // 3个线程都使用pn对象做锁, 以保证每个交替期间只有一个线程在打印
- synchronized (pn) {
- // 如果state!=1, 说明此时尚未轮到线程1打印, 线程1将调用pn的wait()方法, 直到下次被唤醒
- while (state != 1)
- try {
- pn.wait();
- } catch (InterruptedException e) {
- e.printStackTrace();
- }
- // 当state=1时, 轮到线程1打印5次数字
- for (int j = 0; j < 5; j++) {
- // 打印一次后n自增
- System.out.println(Thread.currentThread().getName()
- + ": " + n++);
- }
- System.out.println();
- // 线程1打印完成后, 将state赋值为2, 表示接下来将轮到线程2打印
- state = 2;
- // notifyAll()方法唤醒在pn上wait的线程2和线程3, 同时线程1将退出同步代码块, 释放pn锁.
- // 因此3个线程将再次竞争pn锁
- // 假如线程1或线程3竞争到资源, 由于state不为1或3, 线程1或线程3将很快再次wait, 释放出刚到手的pn锁.
- // 只有线程2可以通过state判定, 所以线程2一定是执行下次打印任务的线程.
- // 对于线程2来说, 获得锁的道路也许是曲折的, 但前途一定是光明的.
- pn.notifyAll();
- }
- }
- }
- }, "线程1").start();
- new Thread(new Runnable() {
- public void run() {
- for (int i = 0; i < 5; i++) {
- synchronized (pn) {
- while (state != 2)
- try {
- pn.wait();
- } catch (InterruptedException e) {
- e.printStackTrace();
- }
- for (int j = 0; j < 5; j++) {
- System.out.println(Thread.currentThread().getName()
- + ": " + n++);
- }
- System.out.println();
- state = 3;
- pn.notifyAll();
- }
- }
- }
- }, "线程2").start();
- new Thread(new Runnable() {
- public void run() {
- for (int i = 0; i < 5; i++) {
- synchronized (pn) {
- while (state != 3)
- try {
- pn.wait();
- } catch (InterruptedException e) {
- e.printStackTrace();
- }
- for (int j = 0; j < 5; j++) {
- System.out.println(Thread.currentThread().getName()
- + ": " + n++);
- }
- System.out.println();
- state = 1;
- pn.notifyAll();
- }
- }
- }
- }, "线程3").start();
- }
- }
解法二: 采用JDK1.5并发包提供的Lock, Condition等类的相关方法控制线程.
- public class NumberPrint implements Runnable {
- private int state = 1;
- private int n = 1;
- // 使用lock做锁
- private ReentrantLock lock = new ReentrantLock();
- // 获得lock锁的3个分支条件
- private Condition c1 = lock.newCondition();
- private Condition c2 = lock.newCondition();
- private Condition c3 = lock.newCondition();
- @Override
- public void run() {
- new Thread(new Runnable() {
- public void run() {
- for (int i = 0; i < 5; i++) {
- try {
- // 线程1获得lock锁后, 其他线程将无法进入需要lock锁的代码块.
- // 在lock.lock()和lock.unlock()之间的代码相当于使用了synchronized(lock){}
- lock.lock();
- while (state != 1)
- try {
- // 线程1竞争到了lock, 但是发现state不为1, 说明此时还未轮到线程1打印.
- // 因此线程1将在c1上wait
- // 与解法一不同的是, 三个线程并非在同一个对象上wait, 也不由同一个对象唤醒
- c1.await();
- } catch (InterruptedException e) {
- e.printStackTrace();
- }
- // 如果线程1竞争到了lock, 也通过了state判定, 将执行打印任务
- for (int j = 0; j < 5; j++) {
- System.out.println(Thread.currentThread().getName()
- + ": " + n++);
- }
- System.out.println();
- // 打印完成后将state赋值为2, 表示下一次的打印任务将由线程2执行
- state = 2;
- // 唤醒在c2分支上wait的线程2
- c2.signal();
- } finally {
- // 打印任务执行完成后需要确保锁被释放, 因此将释放锁的代码放在finally中
- lock.unlock();
- }
- }
- }
- }, "线程1").start();
- new Thread(new Runnable() {
- public void run() {
- for (int i = 0; i < 5; i++) {
- try {
- lock.lock();
- while (state != 2)
- try {
- c2.await();
- } catch (InterruptedException e) {
- e.printStackTrace();
- }
- for (int j = 0; j < 5; j++) {
- System.out.println(Thread.currentThread().getName()
- + ": " + n++);
- }
- System.out.println();
- state = 3;
- c3.signal();
- } finally {
- lock.unlock();
- }
- }
- }
- }, "线程2").start();
- new Thread(new Runnable() {
- public void run() {
- for (int i = 0; i < 5; i++) {
- try {
- lock.lock();
- while (state != 3)
- try {
- c3.await();
- } catch (InterruptedException e) {
- e.printStackTrace();
- }
- for (int j = 0; j < 5; j++) {
- System.out.println(Thread.currentThread().getName()
- + ": " + n++);
- }
- System.out.println();
- state = 1;
- c1.signal();
- } finally {
- lock.unlock();
- }
- }
- }
- }, "线程3").start();
- }
- public static void main(String[] args) {
- new NumberPrint().run();
- }
- }
总结: 对比解法一和解法二, 显然解法二是更好的解决方案. 解法一的问题在于无法进行精确唤醒, 比如线程1执行完打印任务并调用pn.notifyAll()方法后, 3个线程将再次竞争锁, 而不是精确唤醒线程2. 虽然线程2最终将赢得锁, 下一次的打印任务也肯定会由线程2执行, 但是竞争的持续时间是不可预知的, 只能看线程2的人品.
最糟糕的情形可以是: 线程3竞争到了锁, 紧接着wait. 接下来线程1也竞争到了锁, 然后线程1也wait. 此时就再也没有其他线程跟线程2竞争了, 线程2终于艰难的赢得了锁...
留下3个问题供有兴趣的朋友思考:
1. 解法一和解法二中的while (state != xx)是否可以换成if(state != xx), 为什么?
2. 解法一的中的pn.notifyAll()是否可以换成pn.notify(), 为什么?
3. 是否可以用wait(), notify(), notifyAll()等方法完成类似解法二的精确唤醒, 请给出方案或代码.--这个问题我思考了很久, 却没有头绪. 关键的困难在于必须调用pn的wait()方法和notifyAll()方法, 而不能是其他对象的wait()和notifyAll()方法. 如果你有思路, 还望在博客中留言, 不甚感激!
对于第一种方法,我这里有个思路要简单些,这个题目其实是3个运行中的线程,在某一个时刻只有一是可以打印数字的,其他2个都必须是等待状态。给每一个线程一个id,state表示打印序列,75/5/3,可以得出来共有15个打印序列,如果state%3==id,表示当前线程可以打印,否则必须等到一个可打印的序列完成才可以进行下一轮循环。那么可以在方法级上用synchronized关键字声明。虽然有线程竞争的情形出现,但不会出现思锁。
- class NumberPrinter extends Thread {
- static int c = 0;
- static int state = 0;
- private int id;
- @Override
- public synchronized void run() {
- while (state < 15) {
- if (state % 3 == id) {
- for (int j = 0; j < 5; j++) {
- c++;
- System.out.format("Thread %d: %d %n", id, c);
- }
- state++;
- }
- }
- }
- public NumberPrinter(int id) {
- this.id = id;
- }
- public static void main(String[] args) {
- for (int i = 0; i < 3; i++) {
- new NumberPrinter(i).start();
- }
- }
- }