linux下挂载lvm分区方法

1.首先使用vgscan 扫描 lvm 结果如下

[root@localhost ~]# vgscan
Reading all physical volumes. This may take a while…
WARNING: Duplicate VG name VolGroup00: Existing bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh (created here) takes precedence over 1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM
WARNING: Duplicate VG name VolGroup00: Existing bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh (created here) takes precedence over 1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM
WARNING: Duplicate VG name VolGroup00: Existing 1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM (created here) takes precedence over bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh
Found volume group “VolGroup00″ using metadata type lvm2
WARNING: Duplicate VG name VolGroup00: Existing bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh (created here) takes precedence over 1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM
Found volume group “VolGroup00″ using metadata type lvm2



2.通过 vgdisplay VolGroup00 查看 lvm 的 VG UUID

[root@localhost ~]# vgdisplay VolGroup00
WARNING: Duplicate VG name VolGroup00: Existing bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh (created here) takes precedence over 1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM
— Volume group —
VG Name               VolGroup00
System ID
Format                lvm2
Metadata Areas        1
Metadata Sequence No 3
VG Access             read/write
VG Status             resizable
MAX LV                0
Cur LV                2
Open LV               2
Max PV                0
Cur PV                1
Act PV                1
VG Size               129.31 GB
PE Size               32.00 MB
Total PE              4138
Alloc PE / Size       4137 / 129.28 GB
Free PE / Size       1 / 32.00 MB
VG UUID               bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh

可以看出当前操作系统使用的VolGroup00的 VG UUID 是 bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh
说明 1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM 这个VG UUID 是要另一块硬盘的lvm 分区



3.将第二块硬盘的VG的名字重命名

[root@localhost ~]# vgrename 1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM /dev/vg01
WARNING: Duplicate VG name VolGroup00: Existing bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh (created here) takes precedence over 1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM
WARNING: Duplicate VG name VolGroup00: Existing bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh (created here) takes precedence over 1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM
WARNING: Duplicate VG name VolGroup00: Existing 1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM (created here) takes precedence over bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh
Volume group “VolGroup00″ successfully renamed to “vg01″

这个时候通过 vgdisplay 就可以看到 VG的信息了

[root@localhost ~]# vgdisplay
— Volume group —
VG Name               vg01
System ID
Format                lvm2
Metadata Areas        1
Metadata Sequence No 4
VG Access             read/write
VG Status             resizable
MAX LV                0
Cur LV                2
Open LV               0
Max PV                0
Cur PV                1
Act PV                1
VG Size               34.50 GB
PE Size               32.00 MB
Total PE              1104
Alloc PE / Size       1103 / 34.47 GB
Free PE / Size       1 / 32.00 MB
VG UUID               1WnXRG-M0t1-z1A6-rppv-lltN-oDQB-IDonTM

— Volume group —
VG Name               VolGroup00
System ID
Format                lvm2
Metadata Areas        1
Metadata Sequence No 3
VG Access             read/write
VG Status             resizable
MAX LV                0
Cur LV                2
Open LV               2
Max PV                0
Cur PV                1
Act PV                1
VG Size               129.31 GB
PE Size               32.00 MB
Total PE              4138
Alloc PE / Size       4137 / 129.28 GB
Free PE / Size       1 / 32.00 MB
VG UUID               bgKw70-NEBI-QY6s-RvqU-3a59-N8E1-ruOWwh



4.激活VG

VG重命名后,默认是非ACTIVE状态,我们要通过以下方式激活VG

[root@localhost ~]# lvscan
inactive          ‘/dev/vg01/LogVol00′ [31.50 GB] inherit
inactive          ‘/dev/vg01/LogVol01′ [2.97 GB] inherit
ACTIVE            ‘/dev/VolGroup00/LogVol00′ [125.41 GB] inherit
ACTIVE            ‘/dev/VolGroup00/LogVol01′ [3.88 GB] inherit

激活 VG
[root@localhost ~]# vgchange -ay /dev/vg01
2 logical volume(s) in volume group “vg01″ now active

查看状态
[root@localhost ~]# lvscan
ACTIVE            ‘/dev/vg01/LogVol00′ [31.50 GB] inherit
ACTIVE            ‘/dev/vg01/LogVol01′ [2.97 GB] inherit
ACTIVE            ‘/dev/VolGroup00/LogVol00′ [125.41 GB] inherit
ACTIVE            ‘/dev/VolGroup00/LogVol01′ [3.88 GB] inherit
[root@localhost ~]# vgscan
Reading all physical volumes. This may take a while…
Found volume group “vg01″ using metadata type lvm2
Found volume group “VolGroup00″ using metadata type lvm2

到此为止,可以挂载系统了!



5.挂载lvm文件系统

[root@localhost mnt]# mount /dev/vg01 /mnt/sdb3

就可以访问了

源 : http://www.opensolution.org.cn/archives/431.html

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值