rain_crasy的博客

The POSIX 1003.1-2001 standard defines an application programming interface (API) for writing multithreaded applications. This interface is known more commonly as pthreads. A good number of modern operating systems include a threading library of some kind: Solaris (UI) threads, Win32 threads, DCE threads, DECthreads, or any of the draft revisions of the pthreads standard. The trend is that most of these systems are slowly adopting the pthreads standard API, with application developers following suit to reduce porting woes. Win32 does not, and is unlikely to ever, support pthreads natively. This project seeks to provide a freely available and high-quality solution to this problem. Various individuals have been working on independent implementations of this well-documented and standardised threading API, but most of them never see the light of day. The tendency is for people to only implement what they personally need, and that usually does not help others. This project attempts to consolidate these implementations into one implementation of pthreads for Win32.

boot recovery rpm sbl1 tz emmc_appsboot 前两个不是同一个rom里的。用时注意

系统包括五个模块：温度采集模块、温度显示模块、电机控制模块、温度报警模块，8颗LED控制显示模块。 温度传感器采集到的温度要控制在25-35度之间，然后实时的显示在LCD 1602显示屏上，显示方式为：当低于25度时，第一行显示：Temp below 25°，第二行显示：Please raise T；当温度在25-35度之间，第一行显示：Temp is XX°，第二行显示：Keep very well；当温度高于35度，第一行显示：Temp over 35°，第二行显示：Please reduce T。当温度低于25度后，蜂鸣器开始报警，8颗LED灯全部点亮，室内温度上升，到达25度以上之后，蜂鸣器停止报警，8颗LED灯逐渐熄灭（每隔10秒熄灭一颗），恢复正常；当温度高于35度后，蜂鸣器开始报警，步进电机外接风扇开始转动，室内温度逐渐降低，降到35度以下之后，蜂鸣器停止报警，步进电机停止转动，又恢复正常。 （dht11温湿度传感器，oled显示，继电器驱动直流电机，蜂鸣器报警，led示警。湿度只是显示。）