使用 runcluvfy 校验Oracle RAC安装环境

--*****************************************

-- 使用 runcluvfy Oracle RAC安装

--*****************************************

 

    工欲善其事,必先利其器。安装 Orale RAC 是一浩大的工程,尤其是有做好前期的规划与配置工作时将导致安装的复杂

非想象。幸好有runcluvfy工具,大大化了安装工作。下面的演示是基于安装Oracle 10g RAC / Linux完成的。

 

1.安装文件路下使用runcluvfy施安装前的校

    [oracle@node1 cluvfy]$ pwd

    /u01/Clusterware/clusterware/cluvfy

    [oracle@node1 cluvfy]$ ./runcluvfy.sh stage -pre crsinst -n node1,node2 -verbose

   

    Performing pre-checks for cluster services setup

   

    Checking node reachability...

   

    Check: Node reachability from node "node1"

      Destination Node                      Reachable?             

      ------------------------------------  ------------------------

      node1                                 yes                    

      node2                                 yes                    

    Result: Node reachability check passed from node "node1".

   

    Checking user equivalence...

   

    Check: User equivalence for user "oracle"

      Node Name                             Comment                

      ------------------------------------  ------------------------

      node2                                 passed                 

      node1                                 passed                 

    Result: User equivalence check passed for user "oracle".

   

    Checking administrative privileges...

   

    Check: Existence of user "oracle"

      Node Name     User Exists               Comment                

      ------------  ------------------------  ------------------------

      node2         yes                       passed                 

      node1         yes                       passed                 

    Result: User existence check passed for "oracle".

    

    Check: Existence of group "oinstall"

      Node Name     Status                    Group ID               

      ------------  ------------------------  ------------------------

      node2         exists                    500                    

      node1         exists                    500                    

    Result: Group existence check passed for "oinstall".

   

    Check: Membership of user "oracle" in group "oinstall" [as Primary]

      Node Name         User Exists   Group Exists  User in Group  Primary       Comment    

      ----------------  ------------  ------------  ------------  ------------  ------------

      node2             yes           yes           yes           yes           passed     

      node1             yes           yes           yes           yes           passed     

    Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed.

   

    Administrative privileges check passed.

   

    Checking node connectivity...

   

    Interface information for node "node2"

      Interface Name                  IP Address                      Subnet         

      ------------------------------  ------------------------------  ----------------

      eth0                            192.168.0.12                    192.168.0.0    

      eth1                            10.101.0.12                     10.101.0.0     

    Interface information for node "node1"

      Interface Name                  IP Address                      Subnet         

      ------------------------------  ------------------------------  ----------------

      eth0                            192.168.0.11                    192.168.0.0    

      eth1                            10.101.0.11                     10.101.0.0      

   

    Check: Node connectivity of subnet "192.168.0.0"

      Source                          Destination                     Connected?     

      ------------------------------  ------------------------------  ----------------

      node2:eth0                      node1:eth0                      yes            

    Result: Node connectivity check passed for subnet "192.168.0.0" with node(s) node2,node1.

   

    Check: Node connectivity of subnet "10.101.0.0"

      Source                          Destination                     Connected?     

      ------------------------------  ------------------------------  ----------------

      node2:eth1                      node1:eth1                      yes            

    Result: Node connectivity check passed for subnet "10.101.0.0" with node(s) node2,node1.

   

    Suitable interfaces for the private interconnect on subnet "192.168.0.0":

    node2 eth0:192.168.0.12

    node1 eth0:192.168.0.11

   

    Suitable interfaces for the private interconnect on subnet "10.101.0.0":

    node2 eth1:10.101.0.12

    node1 eth1:10.101.0.11

   

    ERROR:

    Could not find a suitable set of interfaces for VIPs.

   

    Result: Node connectivity check failed.

   

    Checking system requirements for 'crs'...

   

    Check: Total memory

      Node Name     Available                 Required                  Comment  

      ------------  ------------------------  ------------------------  ----------

      node2         689.38MB (705924KB)       512MB (524288KB)          passed   

      node1         689.38MB (705924KB)       512MB (524288KB)          passed   

    Result: Total memory check passed.

   

    Check: Free disk space in "/tmp" dir

      Node Name     Available                 Required                  Comment  

      ------------  ------------------------  ------------------------  ----------

      node2         4.22GB (4428784KB)        400MB (409600KB)          passed   

      node1         4.22GB (4426320KB)        400MB (409600KB)          passed   

    Result: Free disk space check passed.

   

    Check: Swap space

      Node Name     Available                 Required                  Comment  

      ------------  ------------------------  ------------------------  ----------

      node2         2GB (2096472KB)           1GB (1048576KB)           passed   

      node1         2GB (2096472KB)           1GB (1048576KB)           passed   

    Result: Swap space check passed.

   

    Check: System architecture

      Node Name     Available                 Required                  Comment  

      ------------  ------------------------  ------------------------  ----------

      node2         i686                      i686                      passed   

      node1         i686                      i686                      passed   

    Result: System architecture check passed.

   

    Check: Kernel version

      Node Name     Available                 Required                  Comment  

      ------------  ------------------------  ------------------------  ----------

      node2         2.6.18-194.el5            2.4.21-15EL               passed   

      node1         2.6.18-194.el5            2.4.21-15EL               passed   

    Result: Kernel version check passed.

   

    Check: Package existence for "make-3.79"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           make-3.81-3.el5                 passed         

      node1                           make-3.81-3.el5                 passed         

    Result: Package existence check passed for "make-3.79".

   

    Check: Package existence for "binutils-2.14"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           binutils-2.17.50.0.6-14.el5     passed         

      node1                           binutils-2.17.50.0.6-14.el5     passed         

    Result: Package existence check passed for "binutils-2.14".

   

    Check: Package existence for "gcc-3.2"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           gcc-4.1.2-48.el5                passed         

      node1                           gcc-4.1.2-48.el5                passed         

    Result: Package existence check passed for "gcc-3.2".

    Check: Package existence for "glibc-2.3.2-95.27"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           glibc-2.5-49                    passed         

      node1                           glibc-2.5-49                    passed         

    Result: Package existence check passed for "glibc-2.3.2-95.27".

   

    Check: Package existence for "compat-db-4.0.14-5"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           compat-db-4.2.52-5.1            passed         

      node1                           compat-db-4.2.52-5.1            passed         

    Result: Package existence check passed for "compat-db-4.0.14-5".

   

    Check: Package existence for "compat-gcc-7.3-2.96.128"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           missing                         failed         

      node1                           missing                         failed         

    Result: Package existence check failed for "compat-gcc-7.3-2.96.128".

   

    Check: Package existence for "compat-gcc-c++-7.3-2.96.128"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           missing                         failed         

      node1                           missing                         failed         

    Result: Package existence check failed for "compat-gcc-c++-7.3-2.96.128".

   

    Check: Package existence for "compat-libstdc++-7.3-2.96.128"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           missing                         failed         

      node1                           missing                         failed         

    Result: Package existence check failed for "compat-libstdc++-7.3-2.96.128".

   

    Check: Package existence for "compat-libstdc++-devel-7.3-2.96.128"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           missing                         failed         

      node1                           missing                         failed         

    Result: Package existence check failed for "compat-libstdc++-devel-7.3-2.96.128".

   

    Check: Package existence for "openmotif-2.2.3"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           openmotif-2.3.1-2.el5_4.1       passed         

      node1                           openmotif-2.3.1-2.el5_4.1       passed         

    Result: Package existence check passed for "openmotif-2.2.3".

   

    Check: Package existence for "setarch-1.3-1"

      Node Name                       Status                          Comment        

      ------------------------------  ------------------------------  ----------------

      node2                           setarch-2.0-1.1                 passed         

      node1                           setarch-2.0-1.1                 passed         

    Result: Package existence check passed for "setarch-1.3-1".

   

    Check: Group existence for "dba"

      Node Name     Status                    Comment                

      ------------  ------------------------  ------------------------

      node2         exists                    passed                 

      node1         exists                    passed                 

    Result: Group existence check passed for "dba".

   

    Check: Group existence for "oinstall"

      Node Name     Status                    Comment                

      ------------  ------------------------  ------------------------

      node2         exists                    passed                 

      node1         exists                    passed                 

    Result: Group existence check passed for "oinstall".

   

    Check: User existence for "nobody"

      Node Name     Status                    Comment                

      ------------  ------------------------  ------------------------

      node2         exists                    passed                 

      node1         exists                    passed                 

    Result: User existence check passed for "nobody".

   

    System requirement failed for 'crs'

   

    Pre-check for cluster services setup was unsuccessful on all the nodes.

 

    Could not find a suitable set of interfaces for VIPs.”,可以忽略该错误

    信息,是一bugMetalink中有详细说明,doc.id:338924.1考本文尾部列出的容。

    

    于上面描述的failed的包,可能的其安装到系

 

2.安装Clusterware 后的检查,注意,此时执行的cluvfy是位于已安装的路

    [oracle@node1 ~]$ pwd

    /u01/app/oracle/product/10.2.0/crs_1/bin

    [oracle@node1 ~]$./cluvfy stage -post crsinst -n node1,node2

   

    Performing post-checks for cluster services setup

   

    Checking node reachability...

    Node reachability check passed from node "node1".

   

   

    Checking user equivalence...

    User equivalence check passed for user "oracle".

   

    Checking Cluster manager integrity...

   

   

    Checking CSS daemon...

    Daemon status check passed for "CSS daemon".

   

    Cluster manager integrity check passed.

   

    Checking cluster integrity...

   

    Cluster integrity check passed

       

    Checking OCR integrity...  

   

    Checking the absence of a non-clustered configuration...

    All nodes free of non-clustered, local-only configurations.

   

    Uniqueness check for OCR device passed.

   

    Checking the version of OCR...

    OCR of correct Version "2" exists.

   

    Checking data integrity of OCR...

    Data integrity check for OCR passed.

   

    OCR integrity check passed.

   

    Checking CRS integrity...

   

    Checking daemon liveness...

    Liveness check passed for "CRS daemon".

   

    Checking daemon liveness...

    Liveness check passed for "CSS daemon".

   

    Checking daemon liveness...

    Liveness check passed for "EVM daemon".

   

    Checking CRS health...

    CRS health check passed.

   

    CRS integrity check passed.

   

    Checking node application existence...

   

   

    Checking existence of VIP node application (required)

    Check passed.

   

    Checking existence of ONS node application (optional)

    Check passed.

   

    Checking existence of GSD node application (optional)

    Check passed.

   

   

    Post-check for cluster services setup was successful.

   

    上面的校可以看出,Clusterware的相后台程,nodeapps关资源以及OCRpassed状态,即Clusterware成功安装

 

3.cluvfy的用法

    [oracle@node1 ~]$ cluvfy -help  #直接使用-help参数即可cluvfy助信息

   

    USAGE:

    cluvfy [ -help ]

    cluvfy stage { -list | -help }

    cluvfy stage {-pre|-post} <stage-name> <stage-specific options>  [-verbose]

    cluvfy comp  { -list | -help }

    cluvfy comp  <component-name> <component-specific options>  [-verbose]

   

    [oracle@node1 ~]$ cluvfy comp -list

       

    USAGE:

    cluvfy comp  <component-name> <component-specific options>  [-verbose]

   

    Valid components are:

            nodereach : checks reachability between nodes

            nodecon   : checks node connectivity

            cfs       : checks CFS integrity

            ssa       : checks shared storage accessibility

            space     : checks space availability

            sys       : checks minimum system requirements

            clu       : checks cluster integrity

            clumgr    : checks cluster manager integrity

            ocr       : checks OCR integrity

            crs       : checks CRS integrity

            nodeapp   : checks node applications existence

            admprv    : checks administrative privileges

            peer      : compares properties with peers

 

4.ID 338924.1

    CLUVFY Fails With Error: Could not find a suitable set of interfaces for VIPs [ID 338924.1]

    ________________________________________

         Modified 29-JUL-2010     Type PROBLEM     Status PUBLISHED    

    In this Document

      Symptoms

      Cause

      Solution

      References

    ________________________________________

    Applies to:

    Oracle Server - Enterprise Edition - Version: 10.2.0.1 to 11.1.0.7 - Release: 10.2 to 11.1

    Information in this document applies to any platform.

    Symptoms

    When running cluvfy to check network connectivity at various stages of the RAC/CRS installation process, cluvfy fails

    with errors similar to the following:

    =========================

    Suitable interfaces for the private interconnect on subnet "10.0.0.0":

    node1 eth0:10.0.0.1

    node2 eth0:10.0.0.2

   

    Suitable interfaces for the private interconnect on subnet "192.168.1.0":

    node1_internal eth1:192.168.1.2

    node2_internal eth1:192.168.1.1

   

    ERROR:

    Could not find a suitable set of interfaces for VIPs.

   

    Result: Node connectivity check failed.

   

    ========================

    On Oracle 11g, you may still see a warning in some cases, such as:

    ========================

    WARNING:

    Could not find a suitable set of interfaces for VIPs.

    ========================

    Output seen will be comparable to that noted above, but IP addresses and node_names may be different - i.e. the node names

     of 'node1','node2','node1_internal','node2_internal'  will be substituted with your actual Public and Private node names.

    

    A second problem that will be encountered in this situation is that at the end of the CRS installation for 10gR2, VIPCA

     will be run automatically in silent mode, as one of the 'optional' configuration assistants.  In this scenario, the VIPCA

      will fail at the end of the CRS installation.   The InstallActions log will show output such as:

    > />> Oracle CRS stack installed and running under init(1M)

    > />> Running vipca(silent) for configuring nodeapps

    > />> The given interface(s), "eth0" is not public. Public interfaces should

    > />> be used to configure virtual IPs.

    Cause

    This issue occurs due to incorrect assumptions made in cluvfy and vipca based on an Internet Best Practice document -

     "RFC1918 - Address Allocation for Private Internets".  This Internet Best Practice RFC can be viewed here:

    http://www.faqs.org/rfcs/rfc1918.html

    From an Oracle perspective, this issue is tracked in BUG:4437727

    Per BUG:4437727, cluvfy makes an incorrect assumption based on RFC 1918 that any IP address/subnet that begins with any

    of the following octets is private and hence may not be fit for use as a VIP:

    172.16.x.x  through 172.31.x.x

    192.168.x.x

    10.x.x.x

    However, this assumption does not take into account that it is possible to use these IPs as Public IP's on an internal

    network  (or intranet).   Therefore, it is very common to use IP addresses in these ranges as Public IP's and as Virtual

     IP(s), and this is a supported configuration.

    Solution

    The solution to the error above that is given when running 'cluvfy' is to simply ignore it if you intend to use an IP in

     one of the above ranges for your VIP. The installation and configuration can continue with no corrective action necessary.

    One result of this, as noted in the problem section, is that the silent VIPCA will fail at the end of the 10gR2 CRS

    installation.   This is because VIPCA is running in silent mode and is trying to notify that the IPs that were provided

    may not be fit to be used as VIP(s). To correct this, you can manually execute the VIPCA GUI after the CRS installation

    is complete.  VIPCA needs to be executed from the CRS_HOME/bin directory as the 'root'  user  (on Unix/Linux)  or as a

    Local Administrator (on Windows):

    $ cd $ORA_CRS_HOME/bin

    $ ./vipca

    Follow the prompts for VIPCA to select the appropriate interface for the public network, and assign the VIPs for each node

    when prompted.  Manually running VIPCA in the GUI mode, using the same IP addresses, should complete successfully.

    Note that if you patch to 10.2.0.3 or above, VIPCA will run correctly in silent mode.  The command to re-run vipca

    silently can be found in CRS_HOME/cfgtoollogs  (or CRS_HOME/cfgtoollogs) in the file 'configToolAllCommands' or

     'configToolFailedCommands'.  Thus, in the case of a new install, the silent mode VIPCA command will fail after the

     10.2.0.1 base release install, but once the CRS Home is patched to 10.2.0.3 or above, vipca can be re-run silently,

     without the need to invoke the GUI tool

    

    References

    NOTE:316583.1 - VIPCA FAILS COMPLAINING THAT INTERFACE IS NOT PUBLIC

     Related

    ________________________________________

    Products

    ________________________________________

    ?    Oracle Database Products > Oracle Database > Oracle Database > Oracle Server - Enterprise Edition

    Keywords

    ________________________________________

    INSTALLATION FAILS; INTERCONNECT; PRIVATE INTERCONNECT; PRIVATE NETWORKS

    Errors

    ________________________________________RFC-1918

 

    上面的描述很多,下面

   

    在出现错误点修改vipca 文件

    [root@node2 ~]# vi $CRS_ORA_HOME/bin/vipca

    找到如下容:

        Remove this workaround when the bug 3937317 is fixed

        arch=`uname -m`

        if [ "$arch" = "i686" -o "$arch" = "ia64" ]

        then

        LD_ASSUME_KERNEL=2.4.19

        export LD_ASSUME_KERNEL

        fi

        #End workaround

        fi 后新添加一行:

        unset LD_ASSUME_KERNEL

       

    以及srvctl 文件

    [root@node2 ~]# vi $CRS_ORA_HOME/bin/srvctl

   

    找到如下容:

        LD_ASSUME_KERNEL=2.4.19

        export LD_ASSUME_KERNEL

        在其后新增加一行:

        unset LD_ASSUME_KERNEL

        保存退出,然后在故障重新root.sh

   

5. 快捷参考

性能请参

    Oracle 硬解析与软解析

    共享池的与优(Shared pool Tuning)

    Buffer cache 与优(一)

    Oracle (caching table)的使用

 

ORACLE体系结构请参

    Oracle 表空间与数据文件

    Oracle 文件

    Oracle 参数文件

    Oracle 机重做日志文件(ONLINE LOG FILE)

    Oracle 控制文件(CONTROLFILE)

    Oracle 归档日志

    Oracle (ROLLBACK)和撤(UNDO)

    Oracle 库实启动关闭过

    Oracle 10g SGA 的自化管理

    Oracle 例和Oracle(Oracle体系结构)

 

关闪回特性请参

    Oracle 回特性(FLASHBACK DATABASE)

    Oracle 回特性(FLASHBACK DROP & RECYCLEBIN)

    Oracle 回特性(Flashback Query、Flashback Table)

    Oracle 回特性(Flashback Version、Flashback Transaction)

 

基于用管理的备份备份请参

    Oracle 备份

    Oracle 热备份

    Oracle 备份复概

    Oracle 例恢

    Oracle 基于用管理恢(详细描述了介及其)

    SYSTEM 表空管理及备份

    SYSAUX表空管理及恢

 

RMAN备份复与管理请参

    RMAN 述及其体系结构

    RMAN 配置、管理

    RMAN 备份详

    RMAN

    RMAN catalog 建和使用

    基于catalog RMAN脚本

基于catalog 的RMAN 备份与

使用RMAN迁移文件系统数据库到ASM

    RMAN 备份困惑(使用plus archivelog)

 

ORACLE故障请参

    ORA-32004 错误处

    ORA-01658 错误

    CRS-0215 错误处

    ORA-00119,ORA-00132 错误处

    又一例SPFILE错误导无法启动

    对参数FAST_START_MTTR_TARGET = 0 解及

    SPFILE 错误导无法启动(ORA-01565)

 

ASM请参

    ASM例及ASM

    ASM 、目的管理

    使用 ASMCMD 工具管理ASM及文件

 

SQL/PLSQL请参

    SQLPlus 常用命令

    替代SQL*Plus

    使用Uniread实现SQLplus功能

    SQL -->SELECT 查询

    SQL --> NEW_VALUE 的使用

    SQL --> 集合(UNION UNION ALL)

    SQL --> 常用函

    SQL --> 视图(CREATE VIEW)

    SQL --> 建和管理表

    SQL --> 多表查询

    SQL --> 过滤和排序

    SQL --> 查询

    SQL --> 组与

    SQL --> 次化查询(START BY ... CONNECT BY PRIOR)

    SQL --> ROLLUPCUBE算符实现数汇总

    PL/SQL -->

    PL/SQL --> (Exception)

    PL/SQL --> 言基

    PL/SQL --> 流程控制

    PL/SQL --> PL/SQL记录

    PL/SQL --> 包的管理

    PL/SQL --> 式游(SQL%FOUND)

    PL/SQL --> 包重、初始化

    PL/SQL --> DBMS_DDL包的使用

    PL/SQL --> DML 触发

    PL/SQL --> INSTEAD OF 触发

    PL/SQL --> 储过

    PL/SQL -->

    PL/SQL --> 动态SQL

    PL/SQL --> 动态SQL的常见错误

 

ORACLE特性

    Oracle 常用目录结构(10g)

    使用OEM,SQL*Plus,iSQL*Plus 管理Oracle

    日志记录模式(LOGGING 、FORCE LOGGING 、NOLOGGING)

    表段、索引段上的LOGGINGNOLOGGING

    Oralce OMF 功能

    Oracle 限、系统权  

    Oracle 角色、配置文件

    Oracle

    Oracle 外部表

    使用外部表管理Oracle 告警日志(ALAERT_$SID.LOG)

    簇表及簇表管理(Index clustered tables)

    EXPDP 工具的使用

    IMPDP 入工具的使用

    Oracle

    SQL*Loader使用方法

    用用户进程跟踪

    配置非默口的动态

    配置ORACLE 接到

    system sys,sysoper sysdba 区别

    ORACLE_SID、DB_NAME、INSTANCE_NAME、DB_DOMIAN、GLOBAL_NAME

    Oracle 丁全集 (Oracle 9i 10g 11g Path)

    Oracle 10.2.0.1 10.2.0.4

    Oracle kill session

 

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

清风智语

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值