解决udev:renamed network interface eth0 to eth1

最新推荐文章于 2024-03-07 01:03:56 发布

sailershen

最新推荐文章于 2024-03-07 01:03:56 发布

阅读量7.6k

点赞数

分类专栏： linux 文章标签： interface network action 虚拟机 each file

本文链接：https://blog.csdn.net/sailershen/article/details/7212213

版权

linux 专栏收录该内容

2 篇文章 0 订阅

订阅专栏

一台rhel 6.2 x64的虚拟机，启动以后发现没有eth0，只有eth1，dmesg的时候看到一句：

udev:renamed network interface eth0 to eth1

网上查了一下，说是删除/etc/udev/rules.d/70-persistent-net.rules这个文件，重启就好了，我看了一下这个文件的内容：

# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:da:51:19", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:df:57:fa", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

删除这个文件并且重启以后，依然没有eth0而有eth1，再看文件内容：

# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:df:57:fa", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

把NAME字段的值改为"eth0"，再重启系统就有eth0了。

这是一台虚拟机，刚把虚拟化文件复制到另一台电脑上并且开机，在原来的地方虚拟机没有这个问题，猜测是复制以后MAC地址发生变化的原因。