各种问题，重装了无数次，记录一下最近一次最成功的操作流程。
(虽然第一行就打错了)
rmp -ivh jdk-8u11-linux-i586.rpm
rpm -ivh jdk-8u11-linux-i586.rpm
java -version
cd /usr
ls
cd java
ls
which java
cd /usr/bin
cat java
ls
ll -a java
rm -rf java
ln -s /etc/alternatives/java /etc/bin/java1.7
pwd
ln -s /etc/alternatives/java /usr/bin/java1.7
ll -a java*
ls /usr/java
ln -s /usr/java/jdk1.8.0_11/jre/bin/java /usr/bin/java
yum -v
exit() q
exit
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo
yum -v
yum list mpich*
yum install mpich2 mpich2-devel mpich2-doc
mv /etc/yum.repos.d/CentOS-Base.repo.backup /etc/yum.repos.d/CentOS-Base.repo
ls /etc/yum.repos.d/
yum install mpich2 mpich2-devel mpich2-doc
which mpicc
find / -name "mpich"
cd ~
vim .bashrc
. .bashrc
which mpi
which mpicc
mpicc -o ok.o ok.c
mpirun -np 1 ./ok.o
vim /etc/resolv.conf
cd /etc
ls
vim host
vim hosts
gedit hosts
cp hosts /home/hosts
ls
gedit hosts
source hosts
mpirun -np 1 ./ok.o
mpirun -np 4 ./ok.o
mkdir 我的备份文件
cd 我的备份文件/
mv ../hosts hosts
ls
cd ..
ls
tar Jxvf Python-3.5.0.tar.xz
cd Python-3.5.0
which make install
./configure --prefix=/usr/local/python3.5
make install
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo
yum install openssl-devel
make install
history
ln -s /usr/local/python3/bin/python3.5 /usr/local/bin/python3.5
python3.5
ln -s /usr/local/python3.5/bin/python3.5 /usr/local/bin/python3.5
rm -rf /usr/local/bin/python3.5
history
ln -s /usr/local/python3.5/bin/python3.5 /usr/local/bin/python3.5
python3.5
ln -s /usr/local/python3.5/bin/pip3.5 /usr/local/bin/pip3.5
pip3.5 install --upgrade pip
pip3.5 install matplotlib
kill %1
jobs
kill %1
jobs
pip3.5 install numpy -i https://pypi.shuosc.org/simple
python3.5
pip3.5 install matplotlib -i https://pypi.shuosc.org/simple
sudo python3.5 -m pip3.5 install --upgrade --force pip
sudo python -m pip3.5 install --upgrade --force pip
python3.5
yum install freetype-devel
yum install libpng-devel
history
pip3.5 install matplotlib -i https://pypi.shuosc.org/simple
gcc -v
g++ -v
yum install build-essential
yum install g++
yum -y install gcc+ gcc-c++
g++ -v
gcc -v
history
pip3.5 install matplotlib -i https://pypi.shuosc.org/simple
pip3.5 install scipy -i https://pypi.shuosc.org/simple
cd git-2.9.5
ls
./configure --prefix=/usr/local/mygit
make
make install
which git
cd /usr
ls
history
cd /usr/local/mygit/
ls
cd lib
ls
cd ../bin/
git --help
ls
git
./git
history
ln -s ./git /usr/local/bin/git
git
ls
pwd
ln -s /usr/local/mygit/bin/git /usr/local/bin/git
rm -rf /usr/local/bin/git
ln -s /usr/local/mygit/bin/git /usr/local/bin/git
git
cd ~
ls -a
ssh
pwd
ssh-keygen -t rsa -C "java233@foxmail.com"
cd ./.ssh/
ls
cat id_rsa.pub
ssh -T git@github.com
ssh -T git@github.com
git config --global user.name "LaoZiHou"
git config --global user.email "java233@foxmail.com"
ssh -T git@github.com
cd /usr
ls
cd local/
ls
cd /home/lzh/eclipse-workspace/
ls
git clone https://github.com/LauZiHou/FancyCat.git
cd /usr/local/mygit/
ls
cd libexec/
ls
cd git-core/
ls
pwd
PATH=$PATH:/usr/local/mygit/libexec/git-core
cd /home/lzh/eclipse-workspace/
git clone https://github.com/LauZiHou/FancyCat.git
cat $PATH
git
which git
ls
rm -rf /usr/local/bin/git
PATH=$PATH:/usr/local/mygit/libexec/git-core
git clone https://github.com/LauZiHou/FancyCat.git
git
$PATH
PATH=/usr/lib/mpich/bin:/usr/lib/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/lzh/bin/
$PATH
git
PATH=/usr/local/mygit/:$PATH
git clone https://github.com/LauZiHou/FancyCat.git
$PATH
PATH=/usr/lib/mpich/bin:/usr/lib/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/lzh/bin
$PATH
cd /usr/local/mygit/
ls
cd lib
ls
cd ..
cd bin
ls
./git-shell
cd ..
ls
cd libexec/
ls
cd git-core/
ls
find 'git-remote-https'
find / "git-remote-https"
find / "LZH"
kill %1
kill %2
git
history
cd /usr/local/mygit/
ls
cd libexec/
ls
cd git-core/
ls
cd mergetools/
ls
cd ..
which git
yum install git
which git
cd /home/lzh/
ls
cd eclipse-workspace/
ls
history
git clone https://github.com/LauZiHou/FancyCat.git
ls
cd FancyCat/
ls
history
以后再排查了...现在要抓紧时间做作业。暂时用着还不错。
缺少tkinter模块，比较麻烦，要装完298行那几个包，修改python安装的一些配置，再重新安装python。
298 yum -y install tkinker tcl-devel tk-devel
299 ls
300 cd /usr
301 ls
302 which python3.5
303 cd /usr/local
304 ls
305 cd python3.5/
306 ls
307 python3.5
308 history
309 cd /usr/local
310 ls
311 rm -rf python3.5/
# -*- makefile -*-
# The file Setup is used by the makesetup script to construct the files
# Makefile and config.c, from Makefile.pre and config.c.in,
# respectively. The file Setup itself is initially copied from
# Setup.dist; once it exists it will not be overwritten, so you can edit
# Setup to your heart's content. Note that Makefile.pre is created
# from Makefile.pre.in by the toplevel configure script.
# (VPATH notes: Setup and Makefile.pre are in the build directory, as
# are Makefile and config.c; the *.in and *.dist files are in the source
# directory.)
# Each line in this file describes one or more optional modules.
# Modules enabled here will not be compiled by the setup.py script,
# so the file can be used to override setup.py's behavior.
# Lines have the following structure:
#
# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
#
# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
# <cpparg> is anything starting with -I, -D, -U or -C
# <library> is anything ending in .a or beginning with -l or -L
# <module> is anything else but should be a valid Python
# identifier (letters, digits, underscores, beginning with non-digit)
#
# (As the makesetup script changes, it may recognize some other
# arguments as well, e.g. *.so and *.sl as libraries. See the big
# case statement in the makesetup script.)
#
# Lines can also have the form
#
# <name> = <value>
#
# which defines a Make variable definition inserted into Makefile.in
#
# Finally, if a line contains just the word "*shared*" (without the
# quotes but with the stars), then the following modules will not be
# built statically. The build process works like this:
#
# 1. Build all modules that are declared as static in Modules/Setup,
# combine them into libpythonxy.a, combine that into python.
# 2. Build all modules that are listed as shared in Modules/Setup.
# 3. Invoke setup.py. That builds all modules that
# a) are not builtin, and
# b) are not listed in Modules/Setup, and
# c) can be build on the target
#
# Therefore, modules declared to be shared will not be
# included in the config.c file, nor in the list of objects to be
# added to the library archive, and their linker options won't be
# added to the linker options. Rules to create their .o files and
# their shared libraries will still be added to the Makefile, and
# their names will be collected in the Make variable SHAREDMODS. This
# is used to build modules as shared libraries. (They can be
# installed using "make sharedinstall", which is implied by the
# toplevel "make install" target.) (For compatibility,
# *noconfig* has the same effect as *shared*.)
#
# In addition, *static* explicitly declares the following modules to
# be static. Lines containing "*static*" and "*shared*" may thus
# alternate throughout this file.
# NOTE: As a standard policy, as many modules as can be supported by a
# platform should be present. The distribution comes with all modules
# enabled that are supported by most platforms and don't require you
# to ftp sources from elsewhere.
# Some special rules to define PYTHONPATH.
# Edit the definitions below to indicate which options you are using.
# Don't add any whitespace or comments!
# Directories where library files get installed.
# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
DESTLIB=$(LIBDEST)
MACHDESTLIB=$(BINLIBDEST)
# NOTE: all the paths are now relative to the prefix that is computed
# at run time!
# Standard path -- don't edit.
# No leading colon since this is the first entry.
# Empty since this is now just the runtime prefix.
DESTPATH=
# Site specific path components -- should begin with : if non-empty
SITEPATH=
# Standard path components for test modules
TESTPATH=
# Path components for machine- or system-dependent modules and shared libraries
MACHDEPPATH=:$(PLATDIR)
EXTRAMACHDEPPATH=
COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)
PYTHONPATH=$(COREPYTHONPATH)
# The modules listed here can't be built as shared libraries for
# various reasons; therefore they are listed here instead of in the
# normal order.
# This only contains the minimal set of modules required to run the
# setup.py script in the root of the Python source tree.
posix posixmodule.c # posix (UNIX) system calls
errno errnomodule.c # posix (UNIX) errno values
pwd pwdmodule.c # this is needed to find out the user's home dir
# if $HOME is not set
_sre _sre.c # Fredrik Lundh's new regular expressions
_codecs _codecsmodule.c # access to the builtin codecs and codec registry
_weakref _weakref.c # weak references
_functools _functoolsmodule.c # Tools for working with functions and callable objects
_operator _operator.c # operator.add() and similar goodies
_collections _collectionsmodule.c # Container types
itertools itertoolsmodule.c # Functions creating iterators for efficient looping
atexit atexitmodule.c # Register functions to be run at interpreter-shutdown
_stat _stat.c # stat.h interface
time timemodule.c # -lm # time operations and variables
# access to ISO C locale support
_locale _localemodule.c # -lintl
# Standard I/O baseline
_io -I$(srcdir)/Modules/_io _io/_iomodule.c _io/iobase.c _io/fileio.c _io/bytesio.c _io/bufferedio.c _io/textio.c _io/stringio.c
# The zipimport module is always imported at startup. Having it as a
# builtin module avoids some bootstrapping problems and reduces overhead.
zipimport zipimport.c
# faulthandler module
faulthandler faulthandler.c
# debug tool to trace memory blocks allocated by Python
_tracemalloc _tracemalloc.c hashtable.c
# The rest of the modules listed in this file are all commented out by
# default. Usually they can be detected and built as dynamically
# loaded modules by the new setup.py script added in Python 2.1. If
# you're on a platform that doesn't support dynamic loading, want to
# compile modules statically into the Python binary, or need to
# specify some odd set of compiler switches, you can uncomment the
# appropriate lines below.
# ======================================================================
# The Python symtable module depends on .h files that setup.py doesn't track
_symtable symtablemodule.c
# Uncommenting the following line tells makesetup that all following
# modules are to be built as shared libraries (see above for more
# detail; also note that *static* reverses this effect):
#*shared*
# GNU readline. Unlike previous Python incarnations, GNU readline is
# now incorporated in an optional module, configured in the Setup file
# instead of by a configure script switch. You may have to insert a
# -L option pointing to the directory where libreadline.* lives,
# and you may have to change -ltermcap to -ltermlib or perhaps remove
# it, depending on your system -- see the GNU readline instructions.
# It's okay for this to be a shared library, too.
#readline readline.c -lreadline -ltermcap
# Modules that should always be present (non UNIX dependent):
#array arraymodule.c # array objects
#cmath cmathmodule.c _math.c # -lm # complex math library functions
#math mathmodule.c _math.c # -lm # math library functions, e.g. sin()
#_struct _struct.c # binary structure packing/unpacking
#_weakref _weakref.c # basic weak reference support
#_testcapi _testcapimodule.c # Python C API test module
#_random _randommodule.c # Random number generator
#_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c # elementtree accelerator
#_pickle _pickle.c # pickle accelerator
#_datetime _datetimemodule.c # datetime accelerator
#_bisect _bisectmodule.c # Bisection algorithms
#_heapq _heapqmodule.c # Heap queue algorithm
#unicodedata unicodedata.c # static Unicode character database
# Modules with some UNIX dependencies -- on by default:
# (If you have a really backward UNIX, select and socket may not be
# supported...)
#fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
#spwd spwdmodule.c # spwd(3)
#grp grpmodule.c # grp(3)
#select selectmodule.c # select(2); not on ancient System V
# Memory-mapped files (also works on Win32).
#mmap mmapmodule.c
# CSV file helper
#_csv _csv.c
# Socket module helper for socket(2)
#_socket socketmodule.c
# Socket module helper for SSL support; you must comment out the other
# socket line above, and possibly edit the SSL variable:
#SSL=/usr/local/ssl
#_ssl _ssl.c \
# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
# -L$(SSL)/lib -lssl -lcrypto
# The crypt module is now disabled by default because it breaks builds
# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
#
# First, look at Setup.config; configure may have set this for you.
#_crypt _cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
# Some more UNIX dependent modules -- off by default, since these
# are not supported by all UNIX systems:
#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
#termios termios.c # Steen Lumholt's termios module
#resource resource.c # Jeremy Hylton's rlimit interface
#_posixsubprocess _posixsubprocess.c # POSIX subprocess module helper
# Multimedia modules -- off by default.
# These don't work for 64-bit platforms!!!
# #993173 says audioop works on 64-bit platforms, though.
# These represent audio samples or images as strings:
#audioop audioop.c # Operations on audio samples
# Note that the _md5 and _sha modules are normally only built if the
# system does not have the OpenSSL libs containing an optimized version.
# The _md5 module implements the RSA Data Security, Inc. MD5
# Message-Digest Algorithm, described in RFC 1321.
#_md5 md5module.c
# The _sha module implements the SHA checksum algorithms.
# (NIST's Secure Hash Algorithms.)
#_sha1 sha1module.c
#_sha256 sha256module.c
#_sha512 sha512module.c
# The _tkinter module.
#
# The command for _tkinter is long and site specific. Please
# uncomment and/or edit those parts as indicated. If you don't have a
# specific extension (e.g. Tix or BLT), leave the corresponding line
# commented out. (Leave the trailing backslashes in! If you
# experience strange errors, you may want to join all uncommented
# lines and remove the backslashes -- the backslash interpretation is
# done by the shell's "read" command and it may not be implemented on
# every system.
# *** Always uncomment this (leave the leading underscore in!):
# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
# -L/usr/local/lib \
# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
# -I/usr/local/include \
# *** Uncomment and edit to reflect where your X11 header files are:
# -I/usr/X11R6/include \
# *** Or uncomment this for Solaris:
# -I/usr/openwin/include \
# *** Uncomment and edit for Tix extension only:
# -DWITH_TIX -ltix8.1.8.2 \
# *** Uncomment and edit for BLT extension only:
# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
# *** Uncomment and edit for PIL (TkImaging) extension only:
# (See http://www.pythonware.com/products/pil/ for more info)
# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
# *** Uncomment and edit for TOGL extension only:
# -DWITH_TOGL togl.c \
# *** Uncomment and edit to reflect your Tcl/Tk versions:
# -ltk8.2 -ltcl8.2 \
# *** Uncomment and edit to reflect where your X11 libraries are:
# -L/usr/X11R6/lib \
# *** Or uncomment this for Solaris:
# -L/usr/openwin/lib \
# *** Uncomment these for TOGL extension only:
# -lGL -lGLU -lXext -lXmu \
# *** Uncomment for AIX:
# -lld \
# *** Always uncomment this; X11 libraries to link with:
# -lX11
# Lance Ellinghaus's syslog module
#syslog syslogmodule.c # syslog daemon interface
# Curses support, requiring the System V version of curses, often
# provided by the ncurses library. e.g. on Linux, link with -lncurses
# instead of -lcurses).
#
# First, look at Setup.config; configure may have set this for you.
#_curses _cursesmodule.c -lcurses -ltermcap
# Wrapper for the panel library that's part of ncurses and SYSV curses.
#_curses_panel _curses_panel.c -lpanel -lncurses
# Modules that provide persistent dictionary-like semantics. You will
# probably want to arrange for at least one of them to be available on
# your machine, though none are defined by default because of library
# dependencies. The Python module dbm/__init__.py provides an
# implementation independent wrapper for these; dbm/dumb.py provides
# similar functionality (but slower of course) implemented in Python.
# The standard Unix dbm module has been moved to Setup.config so that
# it will be compiled as a shared library by default. Compiling it as
# a built-in module causes conflicts with the pybsddb3 module since it
# creates a static dependency on an out-of-date version of db.so.
#
# First, look at Setup.config; configure may have set this for you.
#_dbm _dbmmodule.c # dbm(3) may require -lndbm or similar
# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
#
# First, look at Setup.config; configure may have set this for you.
#_gdbm _gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
# Helper module for various ascii-encoders
#binascii binascii.c
# Fred Drake's interface to the Python parser
#parser parsermodule.c
# Lee Busby's SIGFPE modules.
# The library to link fpectl with is platform specific.
# Choose *one* of the options below for fpectl:
# For SGI IRIX (tested on 5.3):
#fpectl fpectlmodule.c -lfpe
# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
# (Without the compiler you don't have -lsunmath.)
#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
# For other systems: see instructions in fpectlmodule.c.
#fpectl fpectlmodule.c ...
# Test module for fpectl. No extra libraries needed.
#fpetest fpetestmodule.c
# Andrew Kuchling's zlib module.
# This require zlib 1.1.3 (or later).
# See http://www.gzip.org/zlib/
#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
# Interface to the Expat XML parser
#
# Expat was written by James Clark and is now maintained by a group of
# developers on SourceForge; see www.libexpat.org for more
# information. The pyexpat module was written by Paul Prescod after a
# prototype by Jack Jansen. Source of Expat 1.95.2 is included in
# Modules/expat/. Usage of a system shared libexpat.so/expat.dll is
# not advised.
#
# More information on Expat can be found at www.libexpat.org.
#
#pyexpat expat/xmlparse.c expat/xmlrole.c expat/xmltok.c pyexpat.c -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI
# Hye-Shik Chang's CJKCodecs
# multibytecodec is required for all the other CJK codec modules
#_multibytecodec cjkcodecs/multibytecodec.c
#_codecs_cn cjkcodecs/_codecs_cn.c
#_codecs_hk cjkcodecs/_codecs_hk.c
#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
#_codecs_jp cjkcodecs/_codecs_jp.c
#_codecs_kr cjkcodecs/_codecs_kr.c
#_codecs_tw cjkcodecs/_codecs_tw.c
# Example -- included for reference only:
# xx xxmodule.c
# Another example -- the 'xxsubtype' module shows C-level subtyping in action
xxsubtype xxsubtype.c修改后：
# -*- makefile -*-
# The file Setup is used by the makesetup script to construct the files
# Makefile and config.c, from Makefile.pre and config.c.in,
# respectively. The file Setup itself is initially copied from
# Setup.dist; once it exists it will not be overwritten, so you can edit
# Setup to your heart's content. Note that Makefile.pre is created
# from Makefile.pre.in by the toplevel configure script.
# (VPATH notes: Setup and Makefile.pre are in the build directory, as
# are Makefile and config.c; the *.in and *.dist files are in the source
# directory.)
# Each line in this file describes one or more optional modules.
# Modules enabled here will not be compiled by the setup.py script,
# so the file can be used to override setup.py's behavior.
# Lines have the following structure:
#
# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
#
# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
# <cpparg> is anything starting with -I, -D, -U or -C
# <library> is anything ending in .a or beginning with -l or -L
# <module> is anything else but should be a valid Python
# identifier (letters, digits, underscores, beginning with non-digit)
#
# (As the makesetup script changes, it may recognize some other
# arguments as well, e.g. *.so and *.sl as libraries. See the big
# case statement in the makesetup script.)
#
# Lines can also have the form
#
# <name> = <value>
#
# which defines a Make variable definition inserted into Makefile.in
#
# Finally, if a line contains just the word "*shared*" (without the
# quotes but with the stars), then the following modules will not be
# built statically. The build process works like this:
#
# 1. Build all modules that are declared as static in Modules/Setup,
# combine them into libpythonxy.a, combine that into python.
# 2. Build all modules that are listed as shared in Modules/Setup.
# 3. Invoke setup.py. That builds all modules that
# a) are not builtin, and
# b) are not listed in Modules/Setup, and
# c) can be build on the target
#
# Therefore, modules declared to be shared will not be
# included in the config.c file, nor in the list of objects to be
# added to the library archive, and their linker options won't be
# added to the linker options. Rules to create their .o files and
# their shared libraries will still be added to the Makefile, and
# their names will be collected in the Make variable SHAREDMODS. This
# is used to build modules as shared libraries. (They can be
# installed using "make sharedinstall", which is implied by the
# toplevel "make install" target.) (For compatibility,
# *noconfig* has the same effect as *shared*.)
#
# In addition, *static* explicitly declares the following modules to
# be static. Lines containing "*static*" and "*shared*" may thus
# alternate throughout this file.
# NOTE: As a standard policy, as many modules as can be supported by a
# platform should be present. The distribution comes with all modules
# enabled that are supported by most platforms and don't require you
# to ftp sources from elsewhere.
# Some special rules to define PYTHONPATH.
# Edit the definitions below to indicate which options you are using.
# Don't add any whitespace or comments!
# Directories where library files get installed.
# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
DESTLIB=$(LIBDEST)
MACHDESTLIB=$(BINLIBDEST)
# NOTE: all the paths are now relative to the prefix that is computed
# at run time!
# Standard path -- don't edit.
# No leading colon since this is the first entry.
# Empty since this is now just the runtime prefix.
DESTPATH=
# Site specific path components -- should begin with : if non-empty
SITEPATH=
# Standard path components for test modules
TESTPATH=
# Path components for machine- or system-dependent modules and shared libraries
MACHDEPPATH=:$(PLATDIR)
EXTRAMACHDEPPATH=
COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)
PYTHONPATH=$(COREPYTHONPATH)
# The modules listed here can't be built as shared libraries for
# various reasons; therefore they are listed here instead of in the
# normal order.
# This only contains the minimal set of modules required to run the
# setup.py script in the root of the Python source tree.
posix posixmodule.c # posix (UNIX) system calls
errno errnomodule.c # posix (UNIX) errno values
pwd pwdmodule.c # this is needed to find out the user's home dir
# if $HOME is not set
_sre _sre.c # Fredrik Lundh's new regular expressions
_codecs _codecsmodule.c # access to the builtin codecs and codec registry
_weakref _weakref.c # weak references
_functools _functoolsmodule.c # Tools for working with functions and callable objects
_operator _operator.c # operator.add() and similar goodies
_collections _collectionsmodule.c # Container types
itertools itertoolsmodule.c # Functions creating iterators for efficient looping
atexit atexitmodule.c # Register functions to be run at interpreter-shutdown
_stat _stat.c # stat.h interface
time timemodule.c # -lm # time operations and variables
# access to ISO C locale support
_locale _localemodule.c # -lintl
# Standard I/O baseline
_io -I$(srcdir)/Modules/_io _io/_iomodule.c _io/iobase.c _io/fileio.c _io/bytesio.c _io/bufferedio.c _io/textio.c _io/stringio.c
# The zipimport module is always imported at startup. Having it as a
# builtin module avoids some bootstrapping problems and reduces overhead.
zipimport zipimport.c
# faulthandler module
faulthandler faulthandler.c
# debug tool to trace memory blocks allocated by Python
_tracemalloc _tracemalloc.c hashtable.c
# The rest of the modules listed in this file are all commented out by
# default. Usually they can be detected and built as dynamically
# loaded modules by the new setup.py script added in Python 2.1. If
# you're on a platform that doesn't support dynamic loading, want to
# compile modules statically into the Python binary, or need to
# specify some odd set of compiler switches, you can uncomment the
# appropriate lines below.
# ======================================================================
# The Python symtable module depends on .h files that setup.py doesn't track
_symtable symtablemodule.c
# Uncommenting the following line tells makesetup that all following
# modules are to be built as shared libraries (see above for more
# detail; also note that *static* reverses this effect):
#*shared*
# GNU readline. Unlike previous Python incarnations, GNU readline is
# now incorporated in an optional module, configured in the Setup file
# instead of by a configure script switch. You may have to insert a
# -L option pointing to the directory where libreadline.* lives,
# and you may have to change -ltermcap to -ltermlib or perhaps remove
# it, depending on your system -- see the GNU readline instructions.
# It's okay for this to be a shared library, too.
#readline readline.c -lreadline -ltermcap
# Modules that should always be present (non UNIX dependent):
#array arraymodule.c # array objects
#cmath cmathmodule.c _math.c # -lm # complex math library functions
#math mathmodule.c _math.c # -lm # math library functions, e.g. sin()
#_struct _struct.c # binary structure packing/unpacking
#_weakref _weakref.c # basic weak reference support
#_testcapi _testcapimodule.c # Python C API test module
#_random _randommodule.c # Random number generator
#_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c # elementtree accelerator
#_pickle _pickle.c # pickle accelerator
#_datetime _datetimemodule.c # datetime accelerator
#_bisect _bisectmodule.c # Bisection algorithms
#_heapq _heapqmodule.c # Heap queue algorithm
#unicodedata unicodedata.c # static Unicode character database
# Modules with some UNIX dependencies -- on by default:
# (If you have a really backward UNIX, select and socket may not be
# supported...)
#fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
#spwd spwdmodule.c # spwd(3)
#grp grpmodule.c # grp(3)
#select selectmodule.c # select(2); not on ancient System V
# Memory-mapped files (also works on Win32).
#mmap mmapmodule.c
# CSV file helper
#_csv _csv.c
# Socket module helper for socket(2)
#_socket socketmodule.c
# Socket module helper for SSL support; you must comment out the other
# socket line above, and possibly edit the SSL variable:
#SSL=/usr/local/ssl
#_ssl _ssl.c \
# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
# -L$(SSL)/lib -lssl -lcrypto
# The crypt module is now disabled by default because it breaks builds
# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
#
# First, look at Setup.config; configure may have set this for you.
#_crypt _cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
# Some more UNIX dependent modules -- off by default, since these
# are not supported by all UNIX systems:
#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
#termios termios.c # Steen Lumholt's termios module
#resource resource.c # Jeremy Hylton's rlimit interface
#_posixsubprocess _posixsubprocess.c # POSIX subprocess module helper
# Multimedia modules -- off by default.
# These don't work for 64-bit platforms!!!
# #993173 says audioop works on 64-bit platforms, though.
# These represent audio samples or images as strings:
#audioop audioop.c # Operations on audio samples
# Note that the _md5 and _sha modules are normally only built if the
# system does not have the OpenSSL libs containing an optimized version.
# The _md5 module implements the RSA Data Security, Inc. MD5
# Message-Digest Algorithm, described in RFC 1321.
#_md5 md5module.c
# The _sha module implements the SHA checksum algorithms.
# (NIST's Secure Hash Algorithms.)
#_sha1 sha1module.c
#_sha256 sha256module.c
#_sha512 sha512module.c
# The _tkinter module.
#
# The command for _tkinter is long and site specific. Please
# uncomment and/or edit those parts as indicated. If you don't have a
# specific extension (e.g. Tix or BLT), leave the corresponding line
# commented out. (Leave the trailing backslashes in! If you
# experience strange errors, you may want to join all uncommented
# lines and remove the backslashes -- the backslash interpretation is
# done by the shell's "read" command and it may not be implemented on
# every system.
# *** Always uncomment this (leave the leading underscore in!):
_tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
-L/usr/local/lib \
# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
-I/usr/local/include \
# *** Uncomment and edit to reflect where your X11 header files are:
# -I/usr/X11R6/include \
# *** Or uncomment this for Solaris:
# -I/usr/openwin/include \
# *** Uncomment and edit for Tix extension only:
# -DWITH_TIX -ltix8.1.8.2 \
# *** Uncomment and edit for BLT extension only:
# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
# *** Uncomment and edit for PIL (TkImaging) extension only:
# (See http://www.pythonware.com/products/pil/ for more info)
# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
# *** Uncomment and edit for TOGL extension only:
# -DWITH_TOGL togl.c \
# *** Uncomment and edit to reflect your Tcl/Tk versions:
-ltk8.5 -ltcl8.5 \
# *** Uncomment and edit to reflect where your X11 libraries are:
# -L/usr/X11R6/lib \
# *** Or uncomment this for Solaris:
# -L/usr/openwin/lib \
# *** Uncomment these for TOGL extension only:
# -lGL -lGLU -lXext -lXmu \
# *** Uncomment for AIX:
# -lld \
# *** Always uncomment this; X11 libraries to link with:
-lX11
# Lance Ellinghaus's syslog module
#syslog syslogmodule.c # syslog daemon interface
# Curses support, requiring the System V version of curses, often
# provided by the ncurses library. e.g. on Linux, link with -lncurses
# instead of -lcurses).
#
# First, look at Setup.config; configure may have set this for you.
#_curses _cursesmodule.c -lcurses -ltermcap
# Wrapper for the panel library that's part of ncurses and SYSV curses.
#_curses_panel _curses_panel.c -lpanel -lncurses
# Modules that provide persistent dictionary-like semantics. You will
# probably want to arrange for at least one of them to be available on
# your machine, though none are defined by default because of library
# dependencies. The Python module dbm/__init__.py provides an
# implementation independent wrapper for these; dbm/dumb.py provides
# similar functionality (but slower of course) implemented in Python.
# The standard Unix dbm module has been moved to Setup.config so that
# it will be compiled as a shared library by default. Compiling it as
# a built-in module causes conflicts with the pybsddb3 module since it
# creates a static dependency on an out-of-date version of db.so.
#
# First, look at Setup.config; configure may have set this for you.
#_dbm _dbmmodule.c # dbm(3) may require -lndbm or similar
# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
#
# First, look at Setup.config; configure may have set this for you.
#_gdbm _gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
# Helper module for various ascii-encoders
#binascii binascii.c
# Fred Drake's interface to the Python parser
#parser parsermodule.c
# Lee Busby's SIGFPE modules.
# The library to link fpectl with is platform specific.
# Choose *one* of the options below for fpectl:
# For SGI IRIX (tested on 5.3):
#fpectl fpectlmodule.c -lfpe
# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
# (Without the compiler you don't have -lsunmath.)
#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
# For other systems: see instructions in fpectlmodule.c.
#fpectl fpectlmodule.c ...
# Test module for fpectl. No extra libraries needed.
#fpetest fpetestmodule.c
# Andrew Kuchling's zlib module.
# This require zlib 1.1.3 (or later).
# See http://www.gzip.org/zlib/
#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
# Interface to the Expat XML parser
#
# Expat was written by James Clark and is now maintained by a group of
# developers on SourceForge; see www.libexpat.org for more
# information. The pyexpat module was written by Paul Prescod after a
# prototype by Jack Jansen. Source of Expat 1.95.2 is included in
# Modules/expat/. Usage of a system shared libexpat.so/expat.dll is
# not advised.
#
# More information on Expat can be found at www.libexpat.org.
#
#pyexpat expat/xmlparse.c expat/xmlrole.c expat/xmltok.c pyexpat.c -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI
# Hye-Shik Chang's CJKCodecs
# multibytecodec is required for all the other CJK codec modules
#_multibytecodec cjkcodecs/multibytecodec.c
#_codecs_cn cjkcodecs/_codecs_cn.c
#_codecs_hk cjkcodecs/_codecs_hk.c
#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
#_codecs_jp cjkcodecs/_codecs_jp.c
#_codecs_kr cjkcodecs/_codecs_kr.c
#_codecs_tw cjkcodecs/_codecs_tw.c
# Example -- included for reference only:
# xx xxmodule.c
# Another example -- the 'xxsubtype' module shows C-level subtyping in action
xxsubtype xxsubtype.c重新安装python3.5，学习Linux真的很不容易。
314 ./configure --prefix=/usr/local/python3.5
315 make
316 make install
317 python3.5
然而之前pip装的别的包也随着删除掉了，还要重新装。
在那之前还要更新pip，和之前一样的操作...
太不容易了！
1056
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
