密码学课程第一次实验就要根据课本知识实现DES加密,根据《密码学导论》的详细原理解释和网上的一些资料,于是迫不及待写了一份。
首先言简意赅地讲一下我这里涉及的一些函数&函数需要实现的功能
/*--------------------------编写函数声明-------------------------------*/
1.DES子密钥扩展
void DES_MakeSubKeys(char key[64],char SubKeys[16][48]);//DES子密钥扩展算法的实现
void DES_PC1_Transform(char key[64], char tempbts[56]);//PC_1置换的实现
void DES_ROL(char data[56], char time);//实现循环左移
void DES_PC2_Transform(char key[56], char tempbts[48]);//PC_2置换的实现
2.DES局部加密
void DES_Encrypt(char plainbits[64], char SubKeys[16][48]);//DES局部加密过程的实现(加密单个分组)
void DES_IP_Transform(char data[64]);//初始置换IP
void DES_E_Transform(char data[48]);//选择矩阵E-->数据右部32位扩展成48位
void DES_XOR(char R[48], char S[48],int count);//扩展置换后得到的“明文”右部和子密钥异或
void DES_SBOX(char data[48]);//s盒置换
void DES_P_Transform(char data[32]);//置换运算P
void DES_Swap(char left[32],char right[32]);//左右32位互换
void DES_IP_1_Transform(char data[64]);//逆初始置换
3.DES局部解密
void DES_Decrypt(char plainbits[64], char SubKeys[16][48]);//DES局部解密过程的实现(解密单个分组)
4.突破8字节
void ByteToBit(char ch,char bit[8]);//字节转换成二进制
void BitToByte(char bit[8],char *ch);//二进制转换成字节
void Char8ToBit64(char ch[8],char bit[64]);//将长度为8的字符串转为长度为64位二进制位串
void Bit64ToChar8(char bit[64],char ch[8]);//将长度为64位二进制位串转为长度为8的字符串
int DES_Encrypt_read(char *plainFile, char *keyStr,char *cipherFile);//读明文_突破64位二进制
int DES_Decrypt_write(char *cipherFile, char *keyStr,char *plainFile);//解析明文_突破64位二进制
然后说一下各部分的简要核心目的和思想
/*--------------------------DES子密钥扩展算法的实现-------------------------------*/
/*
* 需要用到:置换选择1,置换选择2,循环左移位数表
* 输入为64位密钥(含有奇偶校验位),输出16个48位长的子密钥
*/
/*--------------------------DES局部加密过程的实现-------------------------------*/
/*
*需要用到:选择运算E表,代替函数组s(s盒),置换运算P,逆初始置换IP_1
*输入为单个分组的明文,子密钥,输出为加密后的密文(明文数组最后变成密文数组)
*/
/*--------------------------DES局部解密过程的实现-------------------------------*/
/*
*需要用到:对合运算,加密解密可以公用同一个运算,但是子密钥的使用顺序不同
*输入密文,子密钥(倒序),输出为解密后的密文(密文数组最后变成明文数组)
*/
/*--------------------------字符与二进制的互换-------------------------------*/
/*
*目的是为实现突破8字节(64位二进制),能够读写文件(.txt)
*/
最后附上网上一个“较好”的实现(我觉得原理性和具体实现上存在一些错误,这个需要自己实际实现的可以明显发现)
#include "stdio.h"
#include "memory.h"
#include "time.h"
#include "stdlib.h"
#define PLAIN_FILE_OPEN_ERROR -1
#define KEY_FILE_OPEN_ERROR -2
#define CIPHER_FILE_OPEN_ERROR -3
#define OK 1
typedef char ElemType;
//初始置换表IP
int IP_Table[64] =
{
58, 50, 42, 34, 26, 18, 10, 2,60, 52, 44, 36, 28, 20, 12, 4,
62, 54, 46, 38, 30, 22, 14, 6,64, 56, 48, 40, 32, 24, 16, 8,
57, 49, 41, 33, 25, 17, 9, 1,59, 51, 43, 35, 27, 19, 11, 3,
61, 53, 45, 37, 29, 21, 13, 5,63, 55, 47, 39, 31, 23, 15, 7
};//初始置换表
//逆初始置换表IP^-1
int IP_1_Table[64] =
{
40, 8, 48, 16, 56, 24, 64, 32,39, 7, 47, 15, 55, 23, 63, 31,
38, 6, 46, 14, 54, 22, 62, 30,37, 5, 45, 13, 53, 21, 61, 29,
36, 4, 44, 12, 52, 20, 60, 28,35, 3, 43, 11, 51, 19, 59, 27,
34, 2, 42, 10, 50, 18, 58, 26,33, 1, 41, 9, 49, 17, 57, 25
};//末置换表
//扩充置换表E
int E_Table[48] =
{
32, 1, 2, 3, 4, 5, 4, 5, 6, 7, 8, 9,
8, 9, 10, 11, 12, 13, 12, 13, 14, 15, 16, 17,
16, 17, 18, 19, 20, 21, 20, 21, 22, 23, 24, 25,
24, 25, 26, 27, 28, 29, 28, 29, 30, 31, 32, 1
};//扩展置换表
//置换函数P
int P_Table[32] =
{
16, 7, 20, 21, 29, 12, 28, 17,1, 15, 23, 26,5, 18, 31, 10,
2, 8, 24, 14, 32, 27, 3, 9, 19,13, 30, 6, 22,11, 4, 25
};//p盒置换表
//S盒
int S[8][4][16] =//S1
{
{
{
14,4,13,1,2,15,11,8,3,10,6,12,5,9,0,7},
{
0,15,7,4,14,2,13,1,10,6,12,11,9,5,3,8},
{
4,1,14,8,13,6,2,11,15,12,9,7,3,10,5,0},
{
15,12,8,2,4,9,1,7,5,11,3,14,10,0,6,13}},
//S2
{
{
15,1,8,14,6,11,3,4,9,7,2,13,12,0,5,10},
{
3,13,4,7,15,2,8,14,12,0,1,10,6,9,11,5},
{
0,14,7,11,10,4,13,1,5,8,12,6,9,3,2,15},
{
13,8,10,1,3,15,4,2,11,6,7,12,0,5,14,9}},
//S3
{
{
10,0,9,14,6,3,15,5,1,13,12,7,11,4,2,8},
{
13,7,0,9,3,4,6,10,2,8,5,14,12,11,15,1},
{
13,6,4,9,8,15,3,0,11,1,2,12,5,10,14,7},
{
1,10,13,0,6,9,8,7,4,15,14,3,11,5,2,12}},
//S4
{
{
7,13,14,3,0,6,9,10,1,2,8,5,11,12,4,15},
{
13,8,11,5,6,15,0,3,4,7,2,12,1,10,14,9},
{
10,6,9,0,12,11,7,13,15,1,3,14,5,2,8,4},
{
3,15,0,6,10,1,13,8,9,4,5,11,12,7,2,14}},
//S5
{
{
2,12,4,1,7,10,11,6,8,5,3,15,13,0,14,9},
{
14,11,2,12,4,7,13,1,5,0,15,10,3,9,8,6},
{
4,2,1,11,10,13,7,8,15,9,12,5,6,3,0,14},
{
11,8,12,7,1,14,2,13,6,15,0,9,10,4,5,3}},
//S6
{
{
12,1,10,15,9,2,6,8,0,13,3,4,14,7,5,11},
{
10,15,4,2,7,12,9,5,6,1,13,14,0,11,3,8},
{
9,14,15,5,2,8,12,3,7,0,4,10,1,13,11,6},
{
4,3,2,12,9,5,15,10,11,14,1,7,6,0,8,13}},
//S7
{
{
4,11,2,14,15,0,8,13,3,12,9,7,5,10,6,1},
{
13,0,11,7,4,9,1,10,14,3,5,12,2,15,8,6},
{
1,4,11,13,12,3,7,14,10,15,6,8,0,5,9,2},
{
6,11,13,8,1,4,10,7,9,5,0,15,14,2,3,12}},
//S8
{
{
13,2,8,4,6,15,11,1,10,9,3,14,5,0,12,7},
{
1,15,13,8,10,3,7,4,12,5,6,11,0,14,9,2},
{
7,11,4,1,9,12,14,2,0,6,10,13,15,3,5,8},
{
2,1,14,7,4,10,8,13,15,12,9,0,3,5,6,11}}};
//置换选择1
int PC_1[56] =
{
57, 49, 41, 33, 25, 17, 9,1, 58, 50, 42, 34, 26, 18,
10, 2, 59, 51, 43, 35, 27,19, 11, 3, 60, 52, 44, 36,
63, 55, 47, 39, 31, 23, 15,7, 62, 54, 46, 38, 30, 22,
14, 6, 61, 53, 45, 37, 29,21, 13, 5, 28, 20, 12, 4
};
//置换选择2
int PC_2[48] =
{
14, 17, 11, 24, 1, 5, 3, 28, 15, 6, 21, 10,
23, 19, 12, 4, 26, 8, 16, 7, 27, 20, 13, 2,
41, 52, 31, 37, 47, 55,30, 40, 51, 45, 33, 48,
44, 49, 39, 56, 34, 53,46, 42, 50, 36, 29, 32
};//密钥压缩表
//对左移位数表
int MOVE_TIMES[16] = {
1,1,2,2,2,2,2,2,1,2,2,2,2,2,2,1};
void ByteToBit(ElemType ch,ElemType bit[8]);//字节转换成二进制
void BitToByte(ElemType bit[8],ElemType *ch);//二进制转换成字节
void Char8ToBit64(ElemType ch[8],ElemType bit[64]);//将长度为8的字符串转为二进制位串
void DES_MakeSubKeys(ElemType key[64],ElemType subKeys[16][48]);//生成子密钥
void DES_PC1_Transform(ElemType key[64], ElemType tempbts[56]);//密钥置换
void DES_PC2_Transform(ElemType key[56], ElemType tempbts[48]);//密钥扩展
void DES_ROL(ElemType data[56], int time);//密钥移动方法
void DES_IP_Transform(ElemType data[64]);//初始变换
void DES_IP_1_Transform(ElemType data[64]);//末置换
void DES_E_Transform(ElemType data[48]);//数据右部扩展
void DES_P_Transform(ElemType data[32]);//p置换
void DES_SBOX(ElemType data[48]);//s置换
void DES_XOR(ElemType R[48], ElemType L[48],int count);
void DES_Swap(ElemType left[32],ElemType right[32]);
void DES_EncryptBlock(ElemType plainBlock[8], ElemType subKeys[16][48], ElemType cipherBlock[8]);
void DES_DecryptBlock(ElemType cipherBlock[8], ElemType subKeys[16][48], ElemType plainBlock[8]);
int DES_Encrypt(char *plainFile, char *keyStr,char *cipherFile);//加密方法
int DES_Decrypt(char *cipherFile, char *keyStr,char *plainFile); //解密方法
//字节转换成二进制
void ByteToBit(ElemType ch, ElemType bit[8]){
int cnt;
for(cnt = 0;cnt < 8; cnt++){
*(bit+cnt) = (ch>>cnt)&1;
}
}
//二进制转换成字节
void BitToByte(ElemType bit[8],ElemType *ch){
int cnt;
for(cnt = 0;cnt < 8; cnt++){
*ch |= *(bit + cnt)<<cnt;
}
}
//将长度为8的字符串转为二进制位串
void Char8ToBit64(ElemType ch[8],ElemType bit[64]){
int cnt;
for(cnt = 0; cnt < 8; cnt++){
ByteToBit(*(ch+cnt),bit+(cnt<<3));
}
}
//将二进制位串转为长度为8的字符串
void Bit64ToChar8(ElemType bit[64],ElemType ch[8]){
int cnt;
memset(ch,0,8);
for(cnt = 0; cnt < 8; cnt++){
BitToByte(bit+(cnt<<3),ch+cnt);
}
}
//生成子密钥
void DES_MakeSubKeys(ElemType key[64],ElemType subKeys[16][48]){
ElemType temp[56];
int cnt;
DES_PC1_Transform(key,temp);//PC1置换
for(cnt = 0; cnt < 16; cnt++){
//16轮跌代,产生16个子密钥
DES_ROL(temp,MOVE_TIMES[cnt]);//循环左移
DES_PC2_Transform(temp,subKeys[cnt]);//PC2置换,产生子密钥
}
}
int temp_zhihuan = 1;
//密钥置换方法
void DES_PC1_Transform(ElemType key[64], ElemType tempbts[56]){
int cnt;
printf("置换选择%d:",temp_zhihuan);
for(cnt = 0; cnt < 56; cnt++){
tempbts[cnt] = key[PC_1[cnt]-1];
printf("%d",tempbts[cnt]);
}
temp_zhihuan++;
printf("\n");
if(temp_zhihuan==3)
temp_zhihuan=1;
}
int temp_miyue = 1;
//密钥扩展方法
void DES_PC2_Transform(ElemType key[56], ElemType tempbts[48]){
int cnt;
printf("子密钥K%d:",temp_miyue);
for(cnt = 0; cnt < 48; cnt++){
tempbts[cnt] = key[PC_2[cnt]-1];
printf("%d",tempbts[cnt]);
}
temp_miyue++;
printf("\n");
if(temp_miyue==17)
temp_miyue=1;
}
//循环左移
void DES_ROL(ElemType data[56], int time){
ElemType temp[56];
//保存将要循环移动到右边的位
memcpy(temp,data,time);
memcpy(temp+time,data+28,time);
//前28位移动
memcpy(data,data+time,28-time);
memcpy(data+28-time,temp,time);
//后28位移动
memcpy(data+28,data+28+time,28-time);
memcpy(data+56-time,temp+time,time);
}
//IP置换
void DES_IP_Transform(ElemType data[64]){
int cnt;
ElemType temp[64];
for(cnt = 0; cnt < 64; cnt++){
temp[cnt] = data[IP_Table[cnt]-1];
}
memcpy(data,temp,64);
}
//IP逆置换
void DES_IP_1_Transform(ElemType data[64]){
int cnt;
ElemType temp[64];
for(cnt = 0; cnt < 64; cnt++){
temp[cnt] = data[IP_1_Table[cnt]-1];
}
memcpy(data,temp,64);
}
//扩展置换
void DES_E_Transform(ElemType data[48]){
int cnt;
ElemType temp[48];
for(cnt = 0; cnt < 48; cnt++){
temp[cnt] = data[E_Table[cnt]-1];
}
memcpy(data,temp,48);
}
//P置换
void DES_P_Transform(ElemType data[32]){
int cnt;
ElemType temp[32];
for(cnt = 0; cnt < 32; cnt++){
temp[cnt] = data[P_Table[cnt]-1];
}
memcpy(data,temp,32);
}
//异或
void DES_XOR(ElemType R[48], ElemType L[48] ,int count){
int cnt;
for(cnt = 0; cnt < count; cnt++){
R[cnt] ^= L[cnt];
}
}
//S盒置换
void DES_SBOX(ElemType data[48]){
int cnt;
int line,row,output;
int cur1,cur2;
for(cnt = 0; cnt < 8; cnt++){
cur1 = cnt*6;
cur2 = cnt<<2;
//计算在S盒中的行与列
line = (data[cur1]<<1) + data[cur1+5];//每组第一位乘2加上第六位
row = (data[cur1+1]<<3) + (data[cur1+2]<<2)
+ (data[cur1+3]<<1) + data[cur1+4];//每组第二位乘8加上第三位乘4加上第四位乘2加上第五位
output = S[cnt][line][row];
//化为2进制
data[cur2] = (output&0X08)>>3;
data[cur2+1] = (output&0X04)>>2;
data[cur2+2] = (output&0X02)>>1;
data[cur2+3] = output&0x01;
}
}
//交换
void DES_Swap(ElemType left[32], ElemType right[32]){
ElemType temp[32];
memcpy(temp,left,32);
memcpy(left,right,32);
memcpy(right,temp,32);
}
//加密单个分组
void DES_EncryptBlock(ElemType plainBlock[8], ElemType subKeys[16][48], ElemType cipherBlock[8]){
ElemType plainBits[64];
ElemType copyRight[48];
int cnt;
Char8ToBit64(plainBlock,plainBits);
//初始置换(IP置换)
DES_IP_Transform(plainBits);
//16轮迭代
for(cnt = 0; cnt < 16; cnt++){
memcpy(copyRight,plainBits+32,32);
//将右半部分进行扩展置换,从32位扩展到48位
DES_E_Transform(copyRight);
//将右半部分与子密钥进行异或操作
DES_XOR(copyRight,subKeys[cnt],48);
//异或结果进入S盒,输出32位结果
DES_SBOX(copyRight);
//P置换
DES_P_Transform(copyRight);
//将明文左半部分与右半部分进行异或
DES_XOR(plainBits,copyRight,32);
if(cnt != 15){
//最终完成左右部的交换
DES_Swap(plainBits,plainBits+32);
}
}
//逆初始置换(IP^1置换)
DES_IP_1_Transform(plainBits);
Bit64ToChar8(plainBits,cipherBlock);
}
//解密单个分组
void DES_DecryptBlock(ElemType cipherBlock[8], ElemType subKeys[16][48],ElemType plainBlock[8]){
ElemType cipherBits[64];
ElemType copyRight[48];
int cnt;
Char8ToBit64(cipherBlock,cipherBits);
//初始置换(IP置换)
DES_IP_Transform(cipherBits);
//16轮迭代
for(cnt = 15; cnt >= 0; cnt--){
memcpy(copyRight,cipherBits+32,32);
//将右半部分进行扩展置换,从32位扩展到48位
DES_E_Transform(copyRight);
//将右半部分与子密钥进行异或操作
DES_XOR(copyRight,subKeys[cnt],48);
//异或结果进入S盒,输出32位结果
DES_SBOX(copyRight);
//P置换
DES_P_Transform(copyRight);
//将明文左半部分与右半部分进行异或
DES_XOR(cipherBits,copyRight,32);
if(cnt != 0){
//最终完成左右部的交换
DES_Swap(cipherBits,cipherBits+32);
}
}
//逆初始置换(IP^1置换)
DES_IP_1_Transform(cipherBits);
Bit64ToChar8(cipherBits,plainBlock);
}
//加密文件
int DES_Encrypt(char *plainFile, char *keyStr,char *cipherFile){
FILE *plain,*cipher,*key;//定义文件指针
int count;//用于计数
ElemType plainBlock[8],cipherBlock[8],keyBlock[8];
ElemType bKey[64];
ElemType subKeys[16][48];
if((plain = fopen(plainFile,"rb")) == NULL){
return PLAIN_FILE_OPEN_ERROR;
}//处理明文读取出错
if((key = fopen(keyStr,"rb")) == NULL){
return KEY_FILE_OPEN_ERROR;
}//处理密钥文件读取出错
if((cipher = fopen(cipherFile,"wb")) == NULL){
return CIPHER_FILE_OPEN_ERROR;
}
//设置密钥
memcpy(keyBlock,keyStr,8);
for(int i=0;i<1;i++)
printf("%d",keyBlock[i]);
printf("\n");
//将密钥转换为二进制流
Char8ToBit64(keyBlock,bKey);
//生成子密钥
DES_MakeSubKeys(bKey,subKeys);
while(!feof(plain)){
//每次读8个字节,并返回成功读取的字节数
if((count = fread(plainBlock,sizeof(char),8,plain)) == 8){
DES_EncryptBlock(plainBlock,subKeys,cipherBlock);//加密
fwrite(cipherBlock,sizeof(char),8,cipher); //保存
}
}
if(count){
//填充
memset(plainBlock + count,'\0',7 - count);//用'\0'去填充后面没有到8个字节部分
//最后一个字符保存包括最后一个字符在内的所填充的字符数量
plainBlock[7] = 8 - count;
DES_EncryptBlock(plainBlock,subKeys,cipherBlock);//加密
fwrite(cipherBlock,sizeof(char),8,cipher);//保存
}//处理不是8的整数倍的剩余字节
fclose(plain);//关闭文件
fclose(cipher);//关闭文件
return OK;
}
//解密文件
int DES_Decrypt(char *cipherFile, char *keyStr,char *plainFile){
FILE *plain, *cipher;
int count,times = 0;
long fileLen;
ElemType plainBlock[8],cipherBlock[8],keyBlock[8];
ElemType bKey[64];
ElemType subKeys[16][48];
if((cipher = fopen(cipherFile,"rb")) == NULL){
return CIPHER_FILE_OPEN_ERROR;
}
if((plain = fopen(plainFile,"wb")) == NULL){
return PLAIN_FILE_OPEN_ERROR;
}
//设置密钥
memcpy(keyBlock,keyStr,8);
//将密钥转换为二进制流
Char8ToBit64(keyBlock,bKey);
//生成子密钥
DES_MakeSubKeys(bKey,subKeys);
//取文件长度
fseek(cipher,0,SEEK_END); //将文件指针置尾
fileLen = ftell(cipher); //取文件指针当前位置
rewind(cipher); //将文件指针重指向文件头
while(1){
//密文的字节数一定是8的整数倍
fread(cipherBlock,sizeof(char),8,cipher);
DES_DecryptBlock(cipherBlock,subKeys,plainBlock);
times += 8;
if(times < fileLen){
fwrite(plainBlock,sizeof(char),8,plain);
}
else{
break;
}
}
//判断末尾是否被填充
if(plainBlock[7] < 8){
for(count = 8 - plainBlock[7]; count < 7; count++){
if(plainBlock[count] != '\0'){
break;
}
}
}
if(count == 7){
//有填充
fwrite(plainBlock,sizeof(char),8 - plainBlock[7],plain);//把填充前的数据写入
}
else{
//无填充
fwrite(plainBlock,sizeof(char),8,plain);//8是写入的个数 sizeof(char)是每个所占的空间
}
fclose(plain);//关闭文件
fclose(cipher);//关闭文件
return OK;
}
int main()
{
int result;
clock_t a,b;
a = clock();
result=DES_Encrypt("1.txt","key.txt","2.txt");//加密并返回结果
if(result==-1)
{
printf("找不到明文文件或者读取出错\n");
return 0;
}
if(result==-2)
{
printf("找不到密钥文件或者读取出错\n");
return 0;
}
b = clock();
printf("加密消耗%d毫秒\n",b-a);
//system("pause");
a = clock();
DES_Decrypt("2.txt","key.txt","3.txt");
b = clock();
printf("解密消耗%d毫秒\n",b-a);
// system("pause");
// getchar();
return 0;
}
上诉存在错误:
自己可以研究下但不影响最终结果
附我的实现:
1.结果
- 明文:
您好,欢迎下载==
012345678 - 密文:
12345678
2.打印输出
密钥:00110001 00110010 00110011 00110100 00110101 00110110 00110111 00111000
置换选择1:00000000 00000000 11111111 11110110 01100111 10001000 00001111
C0:00000000 00000000 11111111 1111
D0:01100110 01111000 10000000 1111
N=1
C1:0000000 0000000 0111111 1111110
D1:1100110 0111100 0100000 0011110
子密钥K1:01010000 00101100 10101100 01010111 00101010 11000010
N=2
C2:0000000 0000000 1111111 1111100
D2:1001100 1111000 1000000 0111101
子密钥K2:01010000 10101100 10100100 01010000 10100011 01000111
N=3
C3:0000000 0000011 1111111 1110000
D3:0110011 1100010 0000001 1110110
子密钥K3:11010000 10101100 00100110 11110110 10000100 10001100
N=4
C4:0000000 0001111 1111111 1000000
D4:1001111 0001000 0000111 1011001
子密钥K4:11100000 10100110 00100110 01001000 00110111 11001011
N=5
C5:0000000 0111111 1111110 0000000
D5:0111100 0100000 0011110 1100110
子密钥K5:11100000 10010110 00100110 00111110 11110000 00101001
N=6
C6:0000001 1111111 1111000 0000000
D6:1110001 0000000 1111011 0011001
子密钥K6:11100000 10010010 01110010 01100010 01011101 01100010
N=7
C7:0000111 1111111 1100000 0000000
D7:1000100 0000011 1101100 1100111
子密钥K7:10100100 11010010 01110010 10001100 10101001 00111010
N=8
C8:0011111 1111111 0000000 0000000
D8:0010000 0001111 0110011 0011110
子密钥K8:10100110 01010011 01010010 11100101 01011110 01010000
N=9
C9:0111111 1111110 0000000 0000000
D9:0100000 0011110 1100110 0111100
子密钥K9:00100110 01010011 01010011 11001011 10011010 01000000
N=10
C10:1111111 1111000 0000000 0000001
D10:0000000 1111011 0011001 1110001
子密钥K10:00101111 01010001 01010001 11010000 11000111 00111100
N=11
C11:1111111 1100000 0000000 0000111
D11:0000011 1101100 1100111 1000100
子密钥K11:00001111 01000001 11011001 00011001 00011110 10001100
N=12
C12:1111111 0000000 0000000 0011111
D12:0001111 0110011 0011110 0010000
子密钥K12:00011111 01000001 10011001 11011000 01110000 10110001
N=13
C13:1111100 0000000 0000000 1111111
D13:0111101 1001100 1111000 1000000
子密钥K13:00011111 00001001 10001001 00100011 01101010 00101101