例子：从A8送一帧jpeg图片到videoM3解码，然后在将解码的数据传递到A8, 这个流程涉及的link源码如下：
dm8148 link之间数据传递
1）在A8上调用IpcBitsOutLink_getEmptyVideoBitStreamBufs从IpcBitsOutLink获取buff；然后调用IpcBitsOutLink_putFullVideoBitStreamBufs将数据送入到IpcBitsOutLink；
1.1)IpcBitsOutLink
A8调用IpcBitsOutLink将压缩数据（jpeg，mpeg4，h264）送入到videoM3；首先在/src_linux\links\system的system_common.c中调用IpcBitsOutLink_init函数；
//system_init函数在app初始化时调用；
Int32 System_init()
{
Int32 status;
#ifdef SYSTEM_DEBUG
OSA_printf ( " %u: SYSTEM: System Common Init in progress !!!\n", OSA_getCurTimeInMsec());
#endif
memset(&gSystem_objCommon, 0, sizeof(gSystem_objCommon));
System_ipcInit();
IpcBitsInLink_init();
IpcBitsOutLink_init();
IpcFramesInLink_init();
IpcFramesOutLink_init();
...........
status = OSA_mbxCreate(&gSystem_objCommon.mbx);
UTILS_assert( status==OSA_SOK);
SystemLink_init();
#ifdef SYSTEM_DEBUG
OSA_printf ( " %u: SYSTEM: System Common Init Done !!!\n", OSA_getCurTimeInMsec());
#endif
return status;
}
1.2)IpcBitsOutLink_init函数
Int32 IpcBitsOutLink_init()
{
Int32 status;
System_LinkObj linkObj;
UInt32 ipcBitsOutId;
IpcBitsOutLink_Obj *pObj;
char tskName[32];
UInt32 procId = System_getSelfProcId();
OSA_COMPILETIME_ASSERT(offsetof(SystemIpcBits_ListElem, bitBuf) == 0);
OSA_COMPILETIME_ASSERT(offsetof(Bitstream_Buf, reserved) == 0);
OSA_COMPILETIME_ASSERT(sizeof(((Bitstream_Buf *) 0)->reserved) ==
sizeof(ListMP_Elem));
for (ipcBitsOutId = 0; ipcBitsOutId < IPC_BITS_OUT_LINK_OBJ_MAX;
ipcBitsOutId++)
{
pObj = &gIpcBitsOutLink_obj[ipcBitsOutId];
memset(pObj, 0, sizeof(*pObj));
pObj->tskId =
SYSTEM_MAKE_LINK_ID(procId,
SYSTEM_LINK_ID_IPC_BITS_OUT_0) + ipcBitsOutId;
linkObj.pTsk = &pObj->tsk;
linkObj.getLinkInfo = IpcBitsOutLink_getLinkInfo;
System_registerLink(pObj->tskId, &linkObj);
OSA_SNPRINTF(tskName, "IPC_BITS_OUT%d", ipcBitsOutId);
//注册通知
System_ipcRegisterNotifyCb(pObj->tskId, IpcBitsOutLink_notifyCb);
//初始化ListMP
IpcBitsOutLink_initListMP(pObj);
status = OSA_tskCreate(&pObj->tsk,
IpcBitsOutLink_tskMain,
IPC_LINK_TSK_PRI,
IPC_LINK_TSK_STACK_SIZE, 0, pObj);
OSA_assert(status == OSA_SOK);
}
return status;
}
1.3）IpcBitsOutLink_tskMain函数
Int IpcBitsOutLink_tskMain(struct OSA_TskHndl * pTsk, OSA_MsgHndl * pMsg,
Uint32 curState)
{
UInt32 cmd = OSA_msgGetCmd(pMsg);
Bool ackMsg, done;
Int32 status = IPC_BITSOUT_LINK_S_SUCCESS;
//appData中保存的是和link相关的参数
IpcBitsOutLink_Obj *pObj = (IpcBitsOutLink_Obj *) pTsk->appData;
//SYSTEM_CMD_CREATE为System_linkCreate函数的命令号，如果cmd!=SYSTEM_CMD_CREATE,主函数退出？？？
if (cmd != SYSTEM_CMD_CREATE)
{
OSA_tskAckOrFreeMsg(pMsg, OSA_EFAIL);
return status;
}
status = IpcBitsOutLink_create(pObj, OSA_msgGetPrm(pMsg));
OSA_tskAckOrFreeMsg(pMsg, status);
if (status != OSA_SOK)
return status;
done = FALSE;
ackMsg = FALSE;
while (!done)
{
status = OSA_tskWaitMsg(pTsk, &pMsg);
if (status != OSA_SOK)
break;
cmd = OSA_msgGetCmd(pMsg);
switch (cmd)
{
case SYSTEM_CMD_DELETE:
done = TRUE;
ackMsg = TRUE;
break;
case SYSTEM_IPC_CMD_RELEASE_FRAMES:
OSA_tskAckOrFreeMsg(pMsg, status);
#ifdef SYSTEM_DEBUG_IPC_RT
OSA_printf(" %d: IPC_BITS_OUT : Received Notify !!!\n",
OSA_getCurTimeInMsec());
#endif
IpcBitsOutLink_releaseBitBufs(pObj);
break;
case SYSTEM_CMD_START:
//link start
IpcBitsOutLink_start(pObj);
OSA_tskAckOrFreeMsg(pMsg, status);
break;
case SYSTEM_CMD_STOP:
//link stop
IpcBitsOutLink_stop(pObj);
OSA_tskAckOrFreeMsg(pMsg, status);
break;
default:
OSA_tskAckOrFreeMsg(pMsg, status);
break;
}
}
IpcBitsOutLink_delete(pObj);
#ifdef SYSTEM_DEBUG_IPC_BITS_OUT
OSA_printf(" %d: IPC_BITS_OUT : Delete Done !!!\n",
OSA_getCurTimeInMsec());
#endif
if (ackMsg && pMsg != NULL)
OSA_tskAckOrFreeMsg(pMsg, status);
return IPC_BITSOUT_LINK_S_SUCCESS;
}
1.4）IpcBitsOutLink_create函数
Int32 IpcBitsOutLink_create(IpcBitsOutLink_Obj * pObj,
IpcBitsOutLinkHLOS_CreateParams * pPrm)
{
Int32 status;
UInt32 i;
#ifdef SYSTEM_DEBUG_IPC
OSA_printf(" %d: IPC_BITS_OUT : Create in progress !!!\n",
OSA_getCurTimeInMsec());
#endif
memcpy(&pObj->createArgs, pPrm, sizeof(pObj->createArgs));
for (i=0; i<IPC_LINK_BITS_OUT_MAX_NUM_ALLOC_POOLS; i++)
{
OSA_assert(i < IPC_BITS_OUT_MAX_NUM_ALLOC_POOLS);
if(pObj->createArgs.numBufPerCh[i] == 0)
pObj->createArgs.numBufPerCh[i] =
IPC_BITS_OUT_LINK_MAX_OUT_FRAMES_PER_CH;
if(pObj->createArgs.numBufPerCh[i] >
IPC_BITS_OUT_LINK_MAX_OUT_FRAMES_PER_CH)
{
OSA_printf("\n IPCBITSOUTLINK: WARNING: User is asking for %d buffers per CH. But max allowed is %d. \n"
" Over riding user requested with max allowed \n\n",
pObj->createArgs.numBufPerCh[i],
IPC_BITS_OUT_LINK_MAX_OUT_FRAMES_PER_CH
);
pObj->createArgs.numBufPerCh[i] =
IPC_BITS_OUT_LINK_MAX_OUT_FRAMES_PER_CH;
}
}
//listMP 队列清空
status = System_ipcListMPReset(pObj->listMPOutHndl, pObj->listMPInHndl);
OSA_assert(status == OSA_SOK);
//分配link的内存
IpcBitsOutLink_createOutObj(pObj);
IpcBitsOutLink_initStats(pObj);
pObj->startProcessing = FALSE;
#ifdef SYSTEM_DEBUG_IPC
OSA_printf(" %d: IPC_BITS_OUT : Create Done !!!\n",
OSA_getCurTimeInMsec());
#endif
return IPC_BITSOUT_LINK_S_SUCCESS;
}
1.5）IpcBitsOutLink_createOutObj函数分配该link需要多少内存，link的内存由link自己管理，在建立link时，告诉该link 内存池的个数，每个池中的buff的个数，link自己决定分配多少内存；
static Int IpcBitsOutLink_createOutObj(IpcBitsOutLink_Obj * pObj)
{
Int status = OSA_SOK;
Int32 poolId, elemId, bufId;
IHeap_Handle srBitBufHeapHandle;
UInt32 bufSize, numBufs, totBufSize, cacheLineSize;
const UInt32 srIndex = SYSTEM_IPC_SR_CACHED;
Ptr phyAddr;
ipcbitsoutlink_populate_outbuf_pool_size_info(&pObj->createArgs,
&pObj->createArgs.inQueInfo,
&pObj->outQueInfo);
elemId = 0;
srBitBufHeapHandle = SharedRegion_getHeap(srIndex);
OSA_assert(srBitBufHeapHandle != NULL);
cacheLineSize = SharedRegion_getCacheLineSize(srIndex);
for (poolId = 0; poolId < pObj->outQueInfo.allocPoolInfo.numPools; poolId++)
{
status = OSA_queCreate(&pObj->listElemQue[poolId],
SYSTEM_IPC_BITS_MAX_LIST_ELEM);
OSA_assert(status == OSA_SOK);
bufSize =
OSA_align(pObj->outQueInfo.allocPoolInfo.bufPoolInfo[poolId].
bufSize, cacheLineSize);
numBufs = pObj->outQueInfo.allocPoolInfo.bufPoolInfo[poolId].numBufs;
//总共需要分配的内存大小
totBufSize = bufSize * numBufs;
OSA_printf ("###Bit buff of size from the SR # %d : %d\n", srIndex, totBufSize);
pObj->bitBufPoolPtr[poolId] =
Memory_alloc(srBitBufHeapHandle, totBufSize, cacheLineSize, NULL);
OSA_assert(pObj->bitBufPoolPtr[poolId] != NULL);
OSA_printf("IPC_BITSOUT:BitBuffer Alloc.PoolID:%d,Size:0x%X",
poolId,totBufSize);
phyAddr = IpcBitsOutLink_MapUsrVirt2Phy(pObj->bitBufPoolPtr[poolId]);
pObj->bitBufPoolSize[poolId] = totBufSize;
for (bufId = 0; bufId < numBufs; bufId++)
{
SystemIpcBits_ListElem *listElem;
OSA_assert(elemId < SYSTEM_IPC_BITS_MAX_LIST_ELEM);
listElem = pObj->listElem[elemId];
elemId++;
SYSTEM_IPC_BITS_SET_BUFOWNERPROCID(listElem->bufState);
SYSTEM_IPC_BITS_SET_BUFSTATE(listElem->bufState,
IPC_BITBUF_STATE_FREE);
listElem->bitBuf.addr =
(Ptr) (((UInt32) (pObj->bitBufPoolPtr[poolId])) +
(bufSize * bufId));
if (phyAddr)
{
listElem->bitBuf.phyAddr =
(UInt32) ((UInt32) (phyAddr) + (bufSize * bufId));
}
listElem->bitBuf.allocPoolID = poolId;
listElem->bitBuf.bufSize = bufSize;
listElem->bitBuf.fillLength = 0;
listElem->bitBuf.mvDataFilledSize = 0;
listElem->bitBuf.startOffset = 0;
listElem->bitBuf.bottomFieldBitBufSize = 0;
listElem->bitBuf.doNotDisplay = FALSE;
//获取Buf的指针
listElem->srBufPtr = SharedRegion_getSRPtr(listElem->bitBuf.addr,
srIndex);
OSA_assert(listElem->srBufPtr != IPC_LINK_INVALID_SRPTR);
//将分配的buff挂在插入list队列，使用时，从队列中取empty buff，比如在A8需要将bit数据拷贝传递到IpcBitsOutLink，调用IpcBitsOutLink_getEmptyVideoBitStreamBufs
（IpcBitsOutLink_getEmptyBufs）从队列中取buff；
status =
OSA_quePut(&pObj->listElemQue[poolId], (Int32) listElem,
OSA_TIMEOUT_NONE);
OSA_assert(status == OSA_SOK);
}
}
return status;
}
1.6）A8中调用该函数将buff传递IpcBitsOutLink
Int32 IpcBitsOutLink_putFullVideoBitStreamBufs(UInt32 linkId,
Bitstream_BufList *bufList)
{
OSA_TskHndl * pTsk;
IpcBitsOutLink_Obj * pObj;
Int status;
OSA_assert(bufList != NULL);
if (!((linkId >= SYSTEM_HOST_LINK_ID_IPC_BITS_OUT_0)
&&
(linkId < (SYSTEM_HOST_LINK_ID_IPC_BITS_OUT_0 + IPC_BITS_OUT_LINK_OBJ_MAX))))
{
return IPC_BITSOUT_LINK_E_INVALIDLINKID;
}
pTsk = System_getLinkTskHndl(linkId);
pObj = pTsk->appData;
//将buff传递到下一个link
status = IpcBitsOutLink_putFullBufs(pObj,bufList);
return status;
}
1.7）IpcBitsOutLink_putFullBufs 将buff传递到下一个link，注意IpcBitsOutLink_listMPPut，将buff压入到输出队列，然后发送System_ipcSendNotify 发送通知，通知下一个link来取数据；
static
Int32 IpcBitsOutLink_putFullBufs(IpcBitsOutLink_Obj *pObj,
Bitstream_BufList *pBufList)
{
SystemIpcBits_ListElem *pListElem;
Bitstream_Buf *pBitBuf;
Bitstream_BufList freeBitBufList;
Bool putDone = FALSE;
Int32 bufId;
UInt32 curTime;
freeBitBufList.numBufs = 0;
curTime = OSA_getCurTimeInMsec();
for (bufId = 0; bufId < pBufList->numBufs; bufId++)
{
pBitBuf = pBufList->bufs[bufId];
curTime = pBitBuf->timeStamp = Get_timeStamp(pBitBuf->channelNum); pListElem = (SystemIpcBits_ListElem *)pBitBuf;
OSA_assert(SharedRegion_getPtr(pListElem->srBufPtr) ==
pBitBuf->addr);
if (0 == pBitBuf->fillLength)
{
/* filled length of 0 indicates application
* did not fill any data in this buffer.
* Free it immediately */
#ifdef SYSTEM_DEBUG_IPC_RT
OSA_printf(" IPC_OUT: Dropping bitbuf\n");
#endif
OSA_assert(freeBitBufList.numBufs <
VIDBITSTREAM_MAX_BITSTREAM_BUFS);
freeBitBufList.bufs[freeBitBufList.numBufs] = pBitBuf;
freeBitBufList.numBufs++;
pObj->stats.droppedCount++;
continue;
}
else
{
pObj->stats.recvCount++;
OSA_assert(SYSTEM_IPC_BITS_GET_BUFSTATE(pListElem->bufState)
== IPC_BITBUF_STATE_FREE);
OSA_assert(SYSTEM_IPC_BITS_GET_BUFOWNERPROCID(pListElem->bufState)
== System_getSelfProcId());
pListElem->ipcPrivData = (Ptr) curTime;
SYSTEM_IPC_BITS_SET_BUFSTATE(pListElem->bufState,
IPC_BITBUF_STATE_ALLOCED);
//压入到输出队列
IpcBitsOutLink_listMPPut(pObj, pListElem);
putDone = TRUE;
}
}
if (freeBitBufList.numBufs)
{
IpcBitsOutLink_putEmptyBufs(pObj, &freeBitBufList);
}
if (putDone && (pObj->createArgs.baseCreateParams.notifyNextLink))
{
//通知下一个link，调用Notify_sendEvent函数
System_ipcSendNotify(pObj->createArgs.baseCreateParams.outQueParams[0].
nextLink);
}
if (!putDone)
{
pObj->stats.numNoFullBufCount++;
if ((pObj->stats.numNoFullBufCount % IPC_BITSOUT_STATS_WARN_INTERVAL) == 0)
{
#ifdef DEBUG_IPC_BITS
OSA_printf("IPCBITSOUT:!!!WARNING.!!! NO FULL BUF AVAILABLE. OCCURENCE COUNT:[%d]",
pObj->stats.numNoFullBufCount);
#endif
}
}
return IPC_BITSOUT_LINK_S_SUCCESS;
}
1.8）IpcBitsOutLink_listMPPut 函数
static
Int32 IpcBitsOutLink_listMPPut(IpcBitsOutLink_Obj * pObj,
SystemIpcBits_ListElem * pListElem)
{
Int32 status = IPC_BITSOUT_LINK_S_SUCCESS;
SYSTEM_IPC_BITS_SET_BUFSTATE(pListElem->bufState, IPC_BITBUF_STATE_OUTQUE);
//cache 多核之间数据拷贝，传递到ipcbitsIn(videoM3) link
IpcBitsOutLink_doPrePutCacheOp(pObj, pListElem);
status = ListMP_putTail(pObj->listMPOutHndl, (ListMP_Elem *) pListElem);
OSA_assert(status == ListMP_S_SUCCESS);
return IPC_BITSOUT_LINK_S_SUCCESS;
}
1.9）IpcBitsOutLink_doPrePutCacheOp 函数；
static
Int32 IpcBitsOutLink_doPrePutCacheOp(IpcBitsOutLink_Obj * pObj,
SystemIpcBits_ListElem * pListElem)
{
if (pListElem->bitBuf.fillLength)
{
Cache_wbInv(pListElem->bitBuf.addr,
pListElem->bitBuf.fillLength, Cache_Type_ALL, TRUE);
}
/* No cache ops done since pListElem is allocated from non-cached memory */
UTILS_assert(SharedRegion_isCacheEnabled(SharedRegion_getId(pListElem)) ==
FALSE);
return IPC_BITSOUT_LINK_S_SUCCESS;
}
ListMP_putTail 和ListMP_getHead 作用，多核之间用吗？相邻2个核之间的link公用一个ListMp队列吗？ipcBitsOutLink(A8)发送通知Notify_sendEvent告诉ipcBitsInLink(videoM3),在
ListMP队列已经存在数据；
ListMP实现了多宿主双向循环链表，即该双向循环链表为多个处理器共同拥有，可以由多个处理器共同维护，共同使用。
ListMP的实现区别于一般的双向循环链表，因此它不仅具有双向循环链表的特性外，还增添了其他的特性，比如以下几点：
1.实现了简单的多宿主协议，支持多个读写者（multi-reader、multi-writee）；
2.使用Gate作为内部保护机制，防止多个宿主处理器同时访问该链表；
ListMP的实现并未加入通知机制，如果需要的话，可以在外部封装是引入Notify机制来实现；使用ListMP机制来管理的buffers都需要从共享内存区分配，包括从堆内存分配的buffers以及动
态分配的内存。
2）videoM3 systemLink 多核之间数据传递要用到systemlink，以下是videoM3中systemLink的初始化函数；主要有IpcOutM3Link_init()函数和IpcInM3Link_init()函数；
mcfw/src_bios6/links_m3video/system ;system_m3video.c
Int32 System_init()
{
Int32 status = FVID2_SOK;
#ifdef SYSTEM_DEBUG
Vps_printf(" %d: SYSTEM : System Video Init in progress !!!\n",
Utils_getCurTimeInMsec());
#endif
#ifdef SYSTEM_DEBUG
Vps_printf(" %d: SYSTEM : System Video Init Done !!!\n", Utils_getCurTimeInMsec());
#endif
IpcOutM3Link_init();
IpcInM3Link_init();
IpcBitsInLink_init();
IpcBitsOutLink_init();
IpcFramesInLink_init();
IpcFramesOutLink_init();
Utils_encdecInit();
//编解码link初始化
System_initLinks();
return status;
}
3）IpcBitsInLink(mcfw_bios6)
3.1)初始化函数
Int32 IpcBitsInLink_init()
{
Int32 status;
System_LinkObj linkObj;
UInt32 ipcBitsInId;
IpcBitsInLink_Obj *pObj;
char tskName[32];
UInt32 procId = System_getSelfProcId();
UTILS_COMPILETIME_ASSERT(offsetof(SystemIpcBits_ListElem, bitBuf) == 0);
UTILS_COMPILETIME_ASSERT(offsetof(Bitstream_Buf, reserved) == 0);
UTILS_COMPILETIME_ASSERT(sizeof(((Bitstream_Buf *) 0)->reserved) ==
sizeof(ListMP_Elem));
for (ipcBitsInId = 0; ipcBitsInId < IPC_BITS_IN_LINK_OBJ_MAX; ipcBitsInId++)
{
pObj = &gIpcBitsInLink_obj[ipcBitsInId];
memset(pObj, 0, sizeof(*pObj));
pObj->tskId =
SYSTEM_MAKE_LINK_ID(procId,
SYSTEM_LINK_ID_IPC_BITS_IN_0) + ipcBitsInId;
pObj->state = IPC_BITS_IN_LINK_STATE_INACTIVE;
linkObj.pTsk = &pObj->tsk;
linkObj.linkGetFullFrames = NULL;
linkObj.linkPutEmptyFrames = NULL;
linkObj.linkGetFullBitBufs = IpcBitsInLink_getFullBitBufs;
linkObj.linkPutEmptyBitBufs = IpcBitsInLink_putEmptyBitBufs;
linkObj.getLinkInfo = IpcBitsInLink_getLinkInfo;
System_registerLink(pObj->tskId, &linkObj);
UTILS_SNPRINTF(tskName, "IPC_BITS_IN%d", ipcBitsInId);
System_ipcRegisterNotifyCb(pObj->tskId, IpcBitsInLink_notifyCb);
status = Utils_tskCreate(&pObj->tsk,
IpcBitsInLink_tskMain,
IPC_LINK_TSK_PRI,
gIpcBitsInLink_tskStack[ipcBitsInId],
IPC_LINK_TSK_STACK_SIZE, pObj, tskName);
UTILS_assert(status == FVID2_SOK);
}
return status;
}
3.2）IpcBitsInLink_tskMain 主函数
Void IpcBitsInLink_tskMain(struct Utils_TskHndl * pTsk, Utils_MsgHndl * pMsg)
{
UInt32 cmd = Utils_msgGetCmd(pMsg);
Bool ackMsg, done;
Int32 status;
IpcBitsInLink_Obj *pObj = (IpcBitsInLink_Obj *) pTsk->appData;
if (cmd != SYSTEM_CMD_CREATE)
{
Utils_tskAckOrFreeMsg(pMsg, FVID2_EFAIL);
return;
}
//ListMP 和队列资源初始化
status = IpcBitsInLink_create(pObj, Utils_msgGetPrm(pMsg));
Utils_tskAckOrFreeMsg(pMsg, status);
if (status != FVID2_SOK)
return;
done = FALSE;
ackMsg = FALSE;
while (!done)
{
//接收消息，是接收从ipcbitsOutlink(A8)
status = Utils_tskRecvMsg(pTsk, &pMsg, BIOS_WAIT_FOREVER);
if (status != FVID2_SOK)
break;
cmd = Utils_msgGetCmd(pMsg);
switch (cmd)
{
case SYSTEM_CMD_DELETE:
done = TRUE;
ackMsg = TRUE;
break;
case SYSTEM_CMD_NEW_DATA:
//从IpcInM3 Link获取消息
Utils_tskAckOrFreeMsg(pMsg, status);
IpcBitsInLink_processBitBufs(pObj);
break;
case SYSTEM_CMD_STOP:
IpcBitsInLink_stop(pObj);
Utils_tskAckOrFreeMsg(pMsg, status);
break;
default:
Utils_tskAckOrFreeMsg(pMsg, status);
break;
}
}
IpcBitsInLink_delete(pObj);
#ifdef SYSTEM_DEBUG_IPC_BITS_IN
Vps_printf(" %d: IPC_BITS_IN : Delete Done !!!\n", Utils_getCurTimeInMsec());
#endif
if (ackMsg && pMsg != NULL)
Utils_tskAckOrFreeMsg(pMsg, status);
return;
}
3.3）IpcBitsInLink_processBitBufs函数
Int32 IpcBitsInLink_processBitBufs(IpcBitsInLink_Obj * pObj)
{
Bitstream_Buf *pBitBuf;
SystemIpcBits_ListElem *pListElem;
UInt32 numBitBufs;
Int32 status;
UInt32 curTime;
numBitBufs = 0;
curTime = Utils_getCurTimeInMsec();
while (1)
{
//获取listElem，多核之间获取数据；
pListElem = ListMP_getHead(pObj->listMPOutHndl);
if (pListElem == NULL)
break;
//转化为bitbuff
IpcBitsInLink_getBitBuf(pObj, pListElem, &pBitBuf);
UTILS_assert(SYSTEM_IPC_BITS_GET_BUFSTATE(pListElem->bufState)
== IPC_BITBUF_STATE_OUTQUE);
pBitBuf->reserved[0] = curTime;
SYSTEM_IPC_BITS_SET_BUFOWNERPROCID(pListElem->bufState);
SYSTEM_IPC_BITS_SET_BUFSTATE(pListElem->bufState,
IPC_BITBUF_STATE_DEQUEUED);
pObj->stats.recvCount++;
//压入到输出队列；
status = Utils_quePut(&pObj->outBitBufQue, pBitBuf, BIOS_NO_WAIT);
UTILS_assert(status == FVID2_SOK);
numBitBufs++;
}
#ifdef SYSTEM_DEBUG_IPC_RT
Vps_printf(" %d: IPC_BITS_IN : Recevived %d bitbufs !!!\n",
Utils_getCurTimeInMsec(), numBitBufs);
#endif
//给下一个link发送消息
if (numBitBufs && pObj->createArgs.baseCreateParams.notifyNextLink)
{
UTILS_assert(pObj->createArgs.baseCreateParams.numOutQue == 1);
System_sendLinkCmd(pObj->createArgs.baseCreateParams.outQueParams[0].
nextLink, SYSTEM_CMD_NEW_DATA);
}
return IPC_BITS_IN_LINK_S_SUCCESS;
}
4）VideoM3 declink
4.1)解码link初始化函数
Int32 DecLink_init()
{
Int32 status;
System_LinkObj linkObj;
DecLink_Obj *pObj;
char name[32];
UInt32 objId;
for (objId = 0; objId < DEC_LINK_OBJ_MAX; objId++)
{
pObj = &gDecLink_obj[objId];
memset(pObj, 0, sizeof(*pObj));
pObj->linkId = SYSTEM_LINK_ID_VDEC_0 + objId;
linkObj.pTsk = &pObj->tsk;
linkObj.linkGetFullFrames = DecLink_getFullFrames;
linkObj.linkPutEmptyFrames = DecLink_putEmptyFrames;
linkObj.linkGetFullBitBufs = NULL;
linkObj.linkPutEmptyBitBufs = NULL;
linkObj.getLinkInfo = DecLink_getInfo;
UTILS_SNPRINTF(name, "DEC%d ", objId);
System_registerLink(pObj->linkId, &linkObj);
status = Utils_tskCreate(&pObj->tsk,
DecLink_tskMain,
DEC_LINK_TSK_PRI,
gDecLink_tskStack[objId],
DEC_LINK_TSK_STACK_SIZE, pObj, name);
UTILS_assert(status == FVID2_SOK);
}
return status;
}
4.2）DecLink_tskMain 主函数
Void DecLink_tskMain(struct Utils_TskHndl *pTsk, Utils_MsgHndl * pMsg)
{
UInt32 cmd = Utils_msgGetCmd(pMsg);
Bool ackMsg, done;
Int32 status;
DecLink_Obj *pObj;
UInt32 flushCmds[2];
pObj = (DecLink_Obj *) pTsk->appData;
if (cmd != SYSTEM_CMD_CREATE)
{
#ifndef DEC_LINK_SUPRESS_ERROR_AND_RESET
DECLINK_INTERNAL_ERROR_LOG(DEC_LINK_E_INVALIDCMD,
"Link create should be first cmd."
"Received Cmd:%d", cmd);
#endif
Utils_tskAckOrFreeMsg(pMsg, FVID2_EFAIL);
return;
}
//分配link的内存等资源，创建解码线程（调用该函数DecLink_codecCreateProcessTsk(pObj, tskId);）
status = DecLink_codecCreate(pObj, Utils_msgGetPrm(pMsg));
Utils_tskAckOrFreeMsg(pMsg, status);
if (status != FVID2_SOK)
return;
Utils_encdecHdvicpPrfInit();
done = FALSE;
ackMsg = FALSE;
while (!done)
{
status = Utils_tskRecvMsg(pTsk, &pMsg, BIOS_WAIT_FOREVER);
if (status != FVID2_SOK)
break;
cmd = Utils_msgGetCmd(pMsg);
switch (cmd)
{
case SYSTEM_CMD_NEW_DATA:
Utils_tskAckOrFreeMsg(pMsg, status);
flushCmds[0] = SYSTEM_CMD_NEW_DATA;
Utils_tskFlushMsg(pTsk, flushCmds, 1);
//link收到数据，调用该函数进行解码
DecLink_codecProcessData(pObj);
break;
case DEC_LINK_CMD_GET_PROCESSED_DATA:
Utils_tskAckOrFreeMsg(pMsg, status);
flushCmds[0] = DEC_LINK_CMD_GET_PROCESSED_DATA;
Utils_tskFlushMsg(pTsk, flushCmds, 1);
DecLink_codecGetProcessedDataMsgHandler(pObj);
break;
case DEC_LINK_CMD_PRINT_IVAHD_STATISTICS:
Utils_tskAckOrFreeMsg(pMsg, status);
Utils_encdecHdvicpPrfPrint();
break;
case DEC_LINK_CMD_PRINT_STATISTICS:
DecLink_printStatistics(pObj, TRUE);
Utils_tskAckOrFreeMsg(pMsg, status);
break;
case DEC_LINK_CMD_PRINT_BUFFER_STATISTICS:
Utils_tskAckOrFreeMsg(pMsg, status);
DecLink_printBufferStatus(pObj);
break;
case DEC_LINK_CMD_DISABLE_CHANNEL:
{
DecLink_ChannelInfo *params;
params = (DecLink_ChannelInfo *) Utils_msgGetPrm(pMsg);
DecLink_codecDisableChannel(pObj, params);
Utils_tskAckOrFreeMsg(pMsg, status);
}
break;
case DEC_LINK_CMD_ENABLE_CHANNEL:
{
DecLink_ChannelInfo *params;
params = (DecLink_ChannelInfo *) Utils_msgGetPrm(pMsg);
DecLink_codecEnableChannel(pObj, params);
Utils_tskAckOrFreeMsg(pMsg, status);
}
break;
case DEC_LINK_CMD_SET_TRICKPLAYCONFIG:
{
DecLink_TPlayConfig * params;
params = (DecLink_TPlayConfig *) Utils_msgGetPrm(pMsg);
DecLink_setTPlayConfig(pObj, params);
Utils_tskAckOrFreeMsg(pMsg, status);
}
break;
case SYSTEM_CMD_STOP:
DecLink_codecStop(pObj);
Utils_tskAckOrFreeMsg(pMsg, status);
break;
case SYSTEM_CMD_DELETE:
DecLink_codecStop(pObj);
done = TRUE;
ackMsg = TRUE;
break;
default:
Utils_tskAckOrFreeMsg(pMsg, status);
break;
}
}
DecLink_codecDelete(pObj);
if (ackMsg && pMsg != NULL)
Utils_tskAckOrFreeMsg(pMsg, status);
return;
}
4.3）DecLink_codecProcessData函数从上一个link中获取bit数据，调用videoM3的解码器进行解码；
Int32 DecLink_codecProcessData(DecLink_Obj * pObj)
{
Int32 status;
pObj->newDataProcessOnFrameFree = FALSE;
DecLink_codecQueueBufsToChQue(pObj);
do
{
status = DecLink_codecSubmitData(pObj);
} while (status == FVID2_SOK);
return FVID2_SOK;
}
4.4）DecLink_codecQueueBufsToChQue调用System_getLinksFullBufs从prelink中获取bit数据，保存在BitStream_Buf结构中；
static Int32 DecLink_codecQueueBufsToChQue(DecLink_Obj * pObj)
{
UInt32 bufId, freeBufNum;
Bitstream_Buf *pBuf;
System_LinkInQueParams *pInQueParams;
Bitstream_BufList bufList;
DecLink_ChObj *pChObj;
Int32 status;
UInt32 curTime;
pInQueParams = &pObj->createArgs.inQueParams;
System_getLinksFullBufs(pInQueParams->prevLinkId,
pInQueParams->prevLinkQueId, &bufList);
if (bufList.numBufs)
{
pObj->inBufGetCount += bufList.numBufs;
freeBufNum = 0;
curTime = Utils_getCurTimeInMsec();
for (bufId = 0; bufId < bufList.numBufs; bufId++)
{
pBuf = bufList.bufs[bufId];
pChObj = &pObj->chObj[pBuf->channelNum];
pChObj->inFrameRecvCount++;
// pBuf->fid = pChObj->nextFid;
if(pChObj->disableChn && pChObj->skipFrame == FALSE)
{
pChObj->skipFrame = TRUE;
}
else if((pChObj->disableChn == FALSE) && pChObj->skipFrame)
{
if(pBuf->isKeyFrame == TRUE)
{
pChObj->skipFrame = FALSE;
}
}
if (((pChObj->IFrameOnlyDecode) &&
(!pBuf->isKeyFrame)) || pChObj->skipFrame)
{
pChObj->inBufSkipCount++;
pChObj->inFrameUserSkipCount++;
// Drop if not a I frame
bufList.bufs[freeBufNum] = pBuf;
freeBufNum++;
}
else
{
pChObj->totalInFrameCnt++;
if (pChObj->totalInFrameCnt > DEC_LINK_STATS_START_THRESHOLD)
{
pChObj->totalFrameIntervalTime +=
(curTime - pChObj->prevFrmRecvTime);
}
else
{
pChObj->totalFrameIntervalTime = 0;
pChObj->totalProcessTime = 0;
DecLink_resetStatistics(pObj);
}
pChObj->prevFrmRecvTime = curTime;
//将buff压入队列提供解码器
status = Utils_quePut(&pChObj->inQue, pBuf, BIOS_NO_WAIT);
UTILS_assert(status == FVID2_SOK);
pChObj->inBufQueCount++;
}
}
if (freeBufNum)
{
bufList.numBufs = freeBufNum;
System_putLinksEmptyBufs(pInQueParams->prevLinkId,
pInQueParams->prevLinkQueId, &bufList);
pObj->inBufPutCount += freeBufNum;
}
}
return FVID2_SOK;
}
4.5）System_getLinksFullBufs函数调用systemLink api（pTsk->linkGetFullBitBufs函数）从上一个link获取bit码流数据
Int32 System_getLinksFullBufs(UInt32 linkId, UInt16 queId,
Bitstream_BufList * pBufList)
{
System_LinkObj *pTsk;
linkId = SYSTEM_GET_LINK_ID(linkId);
UTILS_assert(linkId < SYSTEM_LINK_ID_MAX);
pTsk = &gSystem_objCommon.linkObj[linkId];
if (pTsk->linkGetFullBitBufs != NULL)
return pTsk->linkGetFullBitBufs(pTsk->pTsk, queId, pBufList);
return FVID2_EFAIL;
}
4.6）DecLink_codecSubmitData对bit数据进行解码
static Int32 DecLink_codecSubmitData(DecLink_Obj * pObj)
{
DecLink_ReqObj *pReqObj;
DecLink_ChObj *pChObj;
UInt32 chCount,chIdIndex, numProcessCh;
Bitstream_Buf *pInBuf;
FVID2_Frame *pOutFrame;
Int32 status = FVID2_EFAIL, numReqObjPerProcess;
UInt32 tskId, i;
static UInt32 startChID = 0;
System_FrameInfo *pOutFrameInfo;
UInt32 curTime = Utils_getCurTimeInMsec();
numProcessCh = 0;
chIdIndex = startChID;
for (chCount = 0; chCount < pObj->inQueInfo.numCh; chCount++,chIdIndex++)
{
numReqObjPerProcess = 0;
if (chIdIndex >= pObj->inQueInfo.numCh)
chIdIndex = 0;
pChObj = &pObj->chObj[chIdIndex];
if (Utils_queIsEmpty(&pObj->outObj.bufOutQue.
emptyQue[pChObj->allocPoolID]))
{
pObj->newDataProcessOnFrameFree = TRUE;
}
while(numReqObjPerProcess < pChObj->numReqObjPerProcess) {
numReqObjPerProcess++;
status =
Utils_queGet(&pObj->reqQue, (Ptr *) & pReqObj, 1,
BIOS_NO_WAIT);
if (UTILS_ISERROR(status)) {
break;
}
pObj->reqQueCount++;
UTILS_assert(DEC_LINK_MAX_REQ >= pObj->reqQueCount);
tskId = pObj->ch2ProcessTskId[chIdIndex];
if (pChObj->algObj.algCreateParams.fieldMergeDecodeEnable)
{
/* pReqObj->OutFrameList.numFrames should be set to 2 once */
/* codec has support to consume 2 output pointers rather than */
/* just one pointer with 2 contigous fields in field merged */
/* interlaced decode use case. */
pReqObj->OutFrameList.numFrames = 1;
}
else
{
pReqObj->OutFrameList.numFrames = 1;
}
if ((status == FVID2_SOK) &&
(pChObj->inBufQueCount) &&
(Utils_queGetQueuedCount(&pObj->outObj.bufOutQue.emptyQue[pChObj->
allocPoolID]) >= pReqObj->OutFrameList.numFrames) &&
!(Utils_queIsFull(&pObj->decProcessTsk[tskId].processQue)))
{
for (i=0; i<pReqObj->OutFrameList.numFrames; i++)
{
pOutFrame = NULL;
status =
Utils_bufGetEmptyFrameExt(&pObj->outObj.bufOutQue,
&pOutFrame,
pObj->outObj.ch2poolMap[chIdIndex],
BIOS_NO_WAIT);
if (pOutFrame)
{
declink_codec_init_outframe(pObj, chIdIndex, pOutFrame);
pReqObj->OutFrameList.frames[i] = pOutFrame;
}
else
{
break;
}
}
if ((status == FVID2_SOK) && (pOutFrame))
{
//获取待解码的数据
Utils_queGet(&pChObj->inQue, (Ptr *) & pInBuf, 1, BIOS_NO_WAIT);
UTILS_assert(status == FVID2_SOK);
pReqObj->InBuf = pInBuf;
pChObj->inBufQueCount--;
for (i=0; i<pReqObj->OutFrameList.numFrames; i++)
{
pReqObj->OutFrameList.frames[i]->channelNum =
pInBuf->channelNum;
//pInBuf->timeStamp = curTime;
pReqObj->OutFrameList.frames[i]->timeStamp=
pInBuf->timeStamp;
pOutFrameInfo = (System_FrameInfo *) pReqObj->OutFrameList.frames[i]->appData;
pOutFrameInfo->ts64 = (UInt32)pInBuf->upperTimeStamp;
pOutFrameInfo->ts64 <<= 32;
pOutFrameInfo->ts64 = pOutFrameInfo->ts64 | ((UInt32)pInBuf->lowerTimeStamp);
}
numProcessCh++;
//插入到解码处理队列
status =
Utils_quePut(&pObj->decProcessTsk[tskId].processQue,
pReqObj, BIOS_NO_WAIT);
UTILS_assert(status == FVID2_SOK);
pChObj->processReqestCount++;
}
else
{
status = Utils_quePut(&pObj->reqQue, pReqObj, BIOS_NO_WAIT);
startChID = chIdIndex;
UTILS_assert(status == FVID2_SOK);
pObj->reqQueCount--;
status = FVID2_EFAIL;
continue;
}
}
else
{
status = Utils_quePut(&pObj->reqQue, pReqObj, BIOS_NO_WAIT);
UTILS_assert(status == FVID2_SOK);
pObj->reqQueCount--;
startChID = chIdIndex;
status = FVID2_EFAIL;
if (Utils_queIsEmpty(&pObj->outObj.bufOutQue.
emptyQue[pChObj->allocPoolID]))
{
pObj->newDataProcessOnFrameFree = TRUE;
}
}
}
}
return status;
}
4.7）DecLink_codecCreateProcessTsk函数
该函数为解码任务函数；从pObj->decProcessTsk[tskId].processQue队列中获取数据，然后进行解码；
static Void DecLink_codecProcessTskFxn(UArg arg1, UArg arg2)
{
Int32 status, chId, i, j;
DecLink_Obj *pObj;
DecLink_ChObj *pChObj;
DecLink_ReqObj *pReqObj;
FVID2_FrameList freeFrameList;
UInt32 tskId;
pObj = (DecLink_Obj *) arg1;
tskId = (UInt32) arg2;
while (pObj->state != SYSTEM_LINK_STATE_STOP)
{
pObj->reqObjBatch[tskId].numReqObjsInBatch = 0;
status = DEC_LINK_S_SUCCESS;
//从队列中获取待解码的数据
status = Utils_queGet(&pObj->decProcessTsk[tskId].processQue,
(Ptr *) & pReqObj, 1, BIOS_WAIT_FOREVER);
if (!UTILS_ISERROR(status))
{
status = DecLink_PrepareBatch (pObj, tskId, pReqObj,
&pObj->reqObjBatch[tskId]);
if (UTILS_ISERROR(status))
{
UTILS_warn("DEC : IVAHDID : %d ENCLINK:ERROR in "
"DecLink_SubmitBatch.Status[%d]", tskId, status);
}
else
{
/*Log Batch size statistics*/
pObj->batchStatistics[tskId].numBatchesSubmitted++;
pObj->batchStatistics[tskId].currentBatchSize = pObj->
reqObjBatch[tskId].numReqObjsInBatch;
if (pObj->batchStatistics[tskId].maxAchievedBatchSize <
pObj->batchStatistics[tskId].currentBatchSize)
{
pObj->batchStatistics[tskId].maxAchievedBatchSize =
pObj->batchStatistics[tskId].currentBatchSize;
}
pObj->batchStatistics[tskId].aggregateBatchSize =
pObj->batchStatistics[tskId].aggregateBatchSize +
pObj->batchStatistics[tskId].currentBatchSize;
pObj->batchStatistics[tskId].averageBatchSize =
pObj->batchStatistics[tskId].aggregateBatchSize /
pObj->batchStatistics[tskId].numBatchesSubmitted;
}
}
freeFrameList.numFrames = 0;
if (pObj->reqObjBatch[tskId].numReqObjsInBatch)
{
/*Its made sure that for every batch created all ReqObj have the same
codec. And every Request Batch has atleast one ReqObj */
chId = pObj->reqObjBatch[tskId].pReqObj[0]->InBuf->channelNum;
pChObj = &pObj->chObj[chId];
switch (pChObj->algObj.algCreateParams.format)
{
case IVIDEO_H264BP:
case IVIDEO_H264MP:
case IVIDEO_H264HP:
status =
Declink_h264DecodeFrameBatch(pObj,
&pObj->reqObjBatch[tskId],
&freeFrameList, tskId);
if (UTILS_ISERROR(status))
{
#ifndef DEC_LINK_SUPRESS_ERROR_AND_RESET
/*
UTILS_warn("DECLINK:ERROR in "
"Declink_h264DecodeFrameBatch.Status[%d]", status);
*/
#endif
}
break;
case IVIDEO_MPEG4SP:
case IVIDEO_MPEG4ASP:
status = Declink_mpeg4DecodeFrameBatch(pObj,
&pObj->reqObjBatch[tskId],
&freeFrameList);
if (UTILS_ISERROR(status))
{
#ifndef DEC_LINK_SUPRESS_ERROR_AND_RESET
UTILS_warn("DECLINK:ERROR in "
"Declink_mpeg4DecodeFrameBatch.Status[%d]", status);
#endif
}
break;
case IVIDEO_MJPEG:
//调用该函数进行解码
status =
Declink_jpegDecodeFrameBatch(pObj,
&pObj->reqObjBatch[tskId],
&freeFrameList);
if (UTILS_ISERROR(status))
{
UTILS_warn("DECLINK:ERROR in "
"Declink_jpegDecodeFrameBatch.Status[%d]", status);
}
break;
default:
UTILS_assert(FALSE);
}
}
for (i = 0; i < pObj->reqObjBatch[tskId].numReqObjsInBatch; i++)
{
pReqObj = pObj->reqObjBatch[tskId].pReqObj[i];
for (j = 0; j < pReqObj->OutFrameList.numFrames; j++)
{
FVID2_Frame *displayFrame;
DecLink_codecGetDisplayFrame(pObj,
pReqObj->OutFrameList.frames[j],
&freeFrameList, &displayFrame);
pReqObj->OutFrameList.frames[j] = displayFrame;
}
//将解码后的数据插入到队列，主函数会调用DecLink_codecGetProcessedDataMsgHandler函数对数据进行处理，发给下一个link；
status = Utils_quePut(&pObj->processDoneQue, pReqObj,
BIOS_NO_WAIT);
UTILS_assert(status == FVID2_SOK);
}
DecLink_codecFreeProcessedFrames(pObj, &freeFrameList);
}
return;
}
4.8）jpeg解码函数（Declink_jpegDecodeFrameBatch）如下：
Int32 Declink_jpegDecodeFrameBatch(DecLink_Obj * pObj,
DecLink_ReqBatch * pReqObjBatch,
FVID2_FrameList * freeFrameList)
{
int error = XDM_EFAIL, reqObjIdx, chId;
Int32 i, freeBufIdx, prosIdx;
IJPEGVDEC_InArgs *inArgs;
IJPEGVDEC_OutArgs *outArgs;
XDM2_BufDesc *inputBufDesc;
XDM2_BufDesc *outputBufDesc;
IJPEGVDEC_Handle handle;
IALG_Fxns *fxns = NULL;
FVID2_Frame *outFrame = NULL;
IVIDEO2_BufDesc *displayBufs = NULL;
UInt32 bytesConsumed;
DecLink_ReqObj *pReqObj;
DecLink_ChObj *pChObj;
System_FrameInfo *pFrameInfo;
/*Make sure that the Req Object is not empty*/
UTILS_assert (pReqObjBatch->numReqObjsInBatch > 0);
for (reqObjIdx = 0; reqObjIdx < pReqObjBatch->numReqObjsInBatch; reqObjIdx++)
{
pReqObj = pReqObjBatch->pReqObj[reqObjIdx];
chId = pReqObj->InBuf->channelNum;
pChObj = &pObj->chObj[chId];
inArgs = &pChObj->algObj.u.jpegAlgIfObj.inArgs;
outArgs = &pChObj->algObj.u.jpegAlgIfObj.outArgs;
inputBufDesc = &pChObj->algObj.u.jpegAlgIfObj.inBufs;
outputBufDesc = &pChObj->algObj.u.jpegAlgIfObj.outBufs;
handle = pChObj->algObj.u.jpegAlgIfObj.algHandle;
UTILS_assert(handle != NULL);
fxns = (IALG_Fxns *) handle->fxns;
//IRESMAN_HDVICP2_EarlyAcquire((IALG_Handle) handle,
// pChObj->algObj.u.jpegAlgIfObj.ivaChID);
bytesConsumed = 0;
for (prosIdx=0; prosIdx< pReqObj->OutFrameList.numFrames; prosIdx++)
{
/*----------------------------------------------------------------*/
/* Initialize the input ID in input arguments to the bufferid of */
/* buffer element returned from getfreebuffer() function. */
/*----------------------------------------------------------------*/
/* inputID & numBytes need to update before every decode call */
if (FALSE == outArgs->viddecOutArgs.outBufsInUseFlag)
{
outFrame = pReqObj->OutFrameList.frames[prosIdx];
}
else
{
UTILS_assert(NULL != pChObj->algObj.prevOutFrame);
/* Previous buffer was in use. Free the current outBuf */
outFrame = pChObj->algObj.prevOutFrame;
freeFrameList->frames[freeFrameList->numFrames] =
pReqObj->OutFrameList.frames[prosIdx];
pChObj->numBufsInCodec--;
freeFrameList->numFrames++;
}
inArgs->viddecInArgs.inputID = (UInt32) outFrame;
inArgs->viddecInArgs.numBytes = pReqObj->InBuf->fillLength -
bytesConsumed;
for (i = 0; i < inputBufDesc->numBufs; i++)
{
/* Set proper buffer addresses for bitstreamn data */
/*---------------------------------------------------------------*/
inputBufDesc->descs[i].buf = (XDAS_Int8 *) pReqObj->InBuf->addr
+ bytesConsumed;
inputBufDesc->descs[i].bufSize.bytes = pReqObj->InBuf->bufSize;
}
for (i = 0; i < outputBufDesc->numBufs; i++)
{
/* Set proper buffer addresses for Frame data */
/*------------------------------------------------------------*/
if (pChObj->algObj.algCreateParams.tilerEnable)
{
outputBufDesc->descs[i].buf =
(Ptr)
Utils_tilerAddr2CpuAddr((UInt32) (outFrame->addr[0][i]));
}
else
{
outputBufDesc->descs[i].buf = outFrame->addr[0][i];
}
}
fxns->algActivate((IALG_Handle) handle);
//调用visa api进行jpeg解码
error = handle->fxns->ividdec.process((IVIDDEC3_Handle) handle,
inputBufDesc,
outputBufDesc,
(IVIDDEC3_InArgs *) inArgs,
(IVIDDEC3_OutArgs *) outArgs);
fxns->algDeactivate((IALG_Handle) handle);
bytesConsumed = outArgs->viddecOutArgs.bytesConsumed;
if (error != XDM_EOK)
{
DECLINK_INTERNAL_ERROR_LOG(error, "ALGPROCESS FAILED:STATUS");
}
pChObj->algObj.prevOutFrame = outFrame;
pReqObj->status = error;
pReqObj->OutFrameList.frames[prosIdx] = NULL;
UTILS_assert(outArgs->viddecOutArgs.displayBufsMode ==
IVIDDEC3_DISPLAYBUFS_EMBEDDED);
displayBufs = &(outArgs->viddecOutArgs.displayBufs.bufDesc[0]);
if ((outArgs->viddecOutArgs.outputID[0] != 0)
&& (displayBufs->numPlanes))
{
XDAS_Int8 *pExpectedBuf;
pReqObj->OutFrameList.frames[prosIdx] =
(FVID2_Frame *) outArgs->viddecOutArgs.outputID[0];
if (pChObj->algObj.algCreateParams.tilerEnable)
{
pExpectedBuf = (Ptr) Utils_tilerAddr2CpuAddr(
(UInt32) pReqObj->OutFrameList.frames[prosIdx]->addr[0][0]);
}
else
{
pExpectedBuf = pReqObj->OutFrameList.frames[prosIdx]->addr[0][0];
}
UTILS_assert(displayBufs->planeDesc[0].buf == pExpectedBuf);
/* Enable this code once SysTemFrameInfo is updated with support
* for storing frame resolution info */
pFrameInfo = (System_FrameInfo *)
pReqObj->OutFrameList.frames[prosIdx]->appData;
{
UTILS_assert(pFrameInfo != NULL);
pFrameInfo->rtChInfo.width =
displayBufs->activeFrameRegion.bottomRight.x -
displayBufs->activeFrameRegion.topLeft.x;
pFrameInfo->rtChInfo.height =
displayBufs->activeFrameRegion.bottomRight.y -
displayBufs->activeFrameRegion.topLeft.y;
pFrameInfo->rtChInfo.pitch[0] = displayBufs->imagePitch[0];
pFrameInfo->rtChInfo.pitch[1] = displayBufs->imagePitch[1];
pFrameInfo->rtChInfoUpdate = TRUE;
}
pReqObj->OutFrameList.frames[prosIdx]->fid =
Utils_encdecMapXDMContentType2FVID2FID(displayBufs->
contentType);
}
freeBufIdx = 0;
while (outArgs->viddecOutArgs.freeBufID[freeBufIdx] != 0)
{
freeFrameList->frames[freeFrameList->numFrames] =
(FVID2_Frame *) outArgs->viddecOutArgs.freeBufID[freeBufIdx];
freeFrameList->numFrames++;
pChObj->numBufsInCodec--;
freeBufIdx++;
}
}
}
return (error);
}
4.9）DecLink_codecGetProcessedDataMsgHandler函数功能获取解码后的数据，该函数在DecLink_tskMain中调用；
Int32 DecLink_codecGetProcessedDataMsgHandler(DecLink_Obj * pObj)
{
Int32 status;
status = DecLink_codecGetProcessedData(pObj);
UTILS_assert(status == FVID2_SOK);
return DEC_LINK_S_SUCCESS;
}
4.10）DecLink_codecGetProcessedData 处理解码后的数据，发给下一个link
static Int32 DecLink_codecGetProcessedData(DecLink_Obj * pObj)
{
Bitstream_BufList inBufList;
FVID2_FrameList outFrameList;
FVID2_FrameList outFrameSkipList;
UInt32 chId, sendCmd;
System_LinkInQueParams *pInQueParams;
DecLink_ChObj *pChObj;
DecLink_ReqObj *pReqObj;
Int32 status, j;
UInt32 curTime;
sendCmd = FALSE;
inBufList.numBufs = 0;
inBufList.appData = NULL;
outFrameList.numFrames = 0;
outFrameSkipList.numFrames = 0;
curTime = Utils_getCurTimeInMsec();
while(!Utils_queIsEmpty(&pObj->processDoneQue)
&&
(inBufList.numBufs < (VIDBITSTREAM_MAX_BITSTREAM_BUFS - 1))
&&
(outFrameList.numFrames < (FVID2_MAX_FVID_FRAME_PTR - 1)))
{
//获取解码后的数据
status = Utils_queGet(&pObj->processDoneQue, (Ptr *) & pReqObj, 1,
BIOS_NO_WAIT);
if (status != FVID2_SOK)
{
break;
}
UTILS_assert(pReqObj->InBuf != NULL);
chId = pReqObj->InBuf->channelNum;
pChObj = &pObj->chObj[chId];
//if (pChObj->totalInFrameCnt > DEC_LINK_STATS_START_THRESHOLD)
{
if (curTime > pReqObj->InBuf->timeStamp)
{
pChObj->totalProcessTime +=
(curTime - pReqObj->InBuf->timeStamp);
}
}
pChObj->getProcessedBufCount++;
pChObj->outFrameCount++;
inBufList.bufs[inBufList.numBufs] = pReqObj->InBuf;
inBufList.numBufs++;
for (j = 0; j < pReqObj->OutFrameList.numFrames; j++)
{
if (pReqObj->OutFrameList.frames[j])
{
UTILS_assert(pReqObj->InBuf->channelNum ==
pReqObj->OutFrameList.frames[j]->channelNum);
UTILS_assert(pChObj->allocPoolID < UTILS_BUF_MAX_ALLOC_POOLS);
pChObj->trickPlayObj.skipFrame = Utils_doSkipFrame(&(pChObj->trickPlayObj.frameSkipCtx));
if (pChObj->trickPlayObj.skipFrame == TRUE)
{
/* Skip the output frame */
outFrameSkipList.frames[outFrameSkipList.numFrames] =
pReqObj->OutFrameList.frames[j];
outFrameSkipList.numFrames++;
}
else
{
outFrameList.frames[outFrameList.numFrames] =
pReqObj->OutFrameList.frames[j];
outFrameList.numFrames++;
}
}
}
//归还队列；
status = Utils_quePut(&pObj->reqQue, pReqObj, BIOS_NO_WAIT);
UTILS_assert(status == FVID2_SOK);
pObj->reqQueCount--;
}
if (outFrameList.numFrames)
{
//解码后的数据，压入到队列，供下一个link使用
status = Utils_bufPutFullExt(&pObj->outObj.bufOutQue,
&outFrameList);
UTILS_assert(status == FVID2_SOK);
sendCmd = TRUE;
}
if (outFrameSkipList.numFrames)
{
status = DecLink_codecFreeProcessedFrames(pObj, &outFrameSkipList);
UTILS_assert(status == DEC_LINK_S_SUCCESS);
}
if (inBufList.numBufs)
{
/* Free input frames */
pInQueParams = &pObj->createArgs.inQueParams;
System_putLinksEmptyBufs(pInQueParams->prevLinkId,
pInQueParams->prevLinkQueId, &inBufList);
pObj->inBufPutCount += inBufList.numBufs;
}
/* Send-out the output bitbuffer */
if (sendCmd == TRUE)
{
//往下一个link发送消息，告诉下一个link数据已经准备好了
System_sendLinkCmd(pObj->createArgs.outQueParams.nextLink,
SYSTEM_CMD_NEW_DATA);
}
return FVID2_SOK;
}
4.11）Utils_bufPutFullExt 就是将buff压入到输出full队列，然后提供api供外部的其他link使用；
Int32 Utils_bufPutFullExt(Utils_BufHndlExt * pHndl,
FVID2_FrameList * pFrameList)
{
UInt32 idx;
Int32 status;
UTILS_assert(pHndl != NULL);
UTILS_assert(pFrameList != NULL);
UTILS_assert(pFrameList->numFrames <= FVID2_MAX_FVID_FRAME_PTR);
for (idx = 0; idx < pFrameList->numFrames; idx++)
{
status =
Utils_quePut(&pHndl->fullQue, pFrameList->frames[idx],
BIOS_NO_WAIT);
UTILS_assert(status == FVID2_SOK);
}
return FVID2_SOK;
}
4.12）DecLink_getFullFrames 函数提供外部调用，获取解码后的帧数据；
Int32 DecLink_getFullFrames(Utils_TskHndl * pTsk, UInt16 queId,
FVID2_FrameList * pFrameList)
{
DecLink_Obj *pObj = (DecLink_Obj *) pTsk->appData;
UTILS_assert(queId < DEC_LINK_MAX_OUT_QUE);
return Utils_bufGetFullExt(&pObj->outObj.bufOutQue, pFrameList,
BIOS_NO_WAIT);
}
在解码器初始化函数已经注册了该回调函数
linkObj.linkGetFullFrames = DecLink_getFullFrames;
在下一个link调用preLink的该函数获取解码后的数据；
5)IpcFrameOutM3
5.1）IpcFramesOutLink_tskMain函数中调用 IpcFramesOutLink_processFrameBufs获取解码后的数据；
Void IpcFramesOutLink_tskMain(struct Utils_TskHndl * pTsk, Utils_MsgHndl * pMsg)
{
UInt32 cmd = Utils_msgGetCmd(pMsg);
Bool ackMsg, done;
Int32 status;
IpcFramesOutLink_Obj *pObj = (IpcFramesOutLink_Obj *) pTsk->appData;
if (cmd != SYSTEM_CMD_CREATE)
{
Utils_tskAckOrFreeMsg(pMsg, FVID2_EFAIL);
return;
}
status = IpcFramesOutLink_create(pObj, Utils_msgGetPrm(pMsg));
Utils_tskAckOrFreeMsg(pMsg, status);
if (status != FVID2_SOK)
return;
done = FALSE;
ackMsg = FALSE;
while (!done)
{
status = Utils_tskRecvMsg(pTsk, &pMsg, BIOS_WAIT_FOREVER);
if (status != FVID2_SOK)
break;
cmd = Utils_msgGetCmd(pMsg);
switch (cmd)
{
case SYSTEM_CMD_DELETE:
done = TRUE;
ackMsg = TRUE;
break;
case SYSTEM_CMD_NEW_DATA:
Utils_tskAckOrFreeMsg(pMsg, status);
IpcFramesOutLink_processFrameBufs(pObj);
IpcFramesOutLink_releaseFrameBufs(pObj);
break;
case IPCFRAMESOUTRTOS_LINK_CMD_SET_FRAME_RATE:
{
IpcOutM3Link_ChFpsParams *params;
params = (IpcOutM3Link_ChFpsParams *) Utils_msgGetPrm(pMsg);
IpcFramesOutLink_SetFrameRate(pObj, params);
Utils_tskAckOrFreeMsg(pMsg, status);
}
break;
case IPCFRAMESOUTRTOS_LINK_CMD_PRINT_STATISTICS:
IpcFramesOutLink_printStatistics(pObj, TRUE);
Utils_tskAckOrFreeMsg(pMsg, status);
break;
case SYSTEM_IPC_CMD_RELEASE_FRAMES:
Utils_tskAckOrFreeMsg(pMsg, status);
#ifdef SYSTEM_DEBUG_IPC_RT
Vps_printf(" %d: IPC_FRAMES_OUT : Received Notify !!!\n",
Utils_getCurTimeInMsec());
#endif
IpcFramesOutLink_releaseFrameBufs(pObj);
break;
default:
Utils_tskAckOrFreeMsg(pMsg, status);
break;
}
}
IpcFramesOutLink_delete(pObj);
#ifdef SYSTEM_DEBUG_IPC_FRAMES_OUT
Vps_printf(" %d: IPC_FRAMES_OUT : Delete Done !!!\n", Utils_getCurTimeInMsec());
#endif
if (ackMsg && pMsg != NULL)
Utils_tskAckOrFreeMsg(pMsg, status);
return;
}
5.2）IpcFramesOutLink_processFrameBufs获取数据；
Int32 IpcFramesOutLink_processFrameBufs(IpcFramesOutLink_Obj * pObj)
{
System_LinkInQueParams *pInQueParams;
FVID2_FrameList bufList;
FVID2_Frame *pFrameBuf = NULL;
SystemIpcFrames_ListElem *pListElem;
Int32 status;
Int32 bufId;
UInt32 curTime;
FVID2_FrameList freeFrameBufList;
UInt8 queId;
UInt32 sendMsgToTsk = 0;
UInt32 chPerQueue;
IpcFramesOutLink_ChObj *pChObj;
pInQueParams = &pObj->createArgs.baseCreateParams.inQueParams;
bufList.numFrames = 0;
//下面函数是从解码link获取数据，数据保存在bufList中；
System_getLinksFullFrames(pInQueParams->prevLinkId,
pInQueParams->prevLinkQueId, &bufList);
freeFrameBufList.numFrames = 0;
curTime = Utils_getCurTimeInMsec();
if (bufList.numFrames)
{
#ifdef SYSTEM_DEBUG_IPC_RT
Vps_printf(" %d: IPC_FRAMES_OUT : Received %d framebufs !!!\n",
Utils_getCurTimeInMsec(), bufList.numFrames);
#endif
UTILS_assert(bufList.numFrames <= FVID2_MAX_FVID_FRAME_PTR);
pObj->stats.recvCount += bufList.numFrames;
sendMsgToTsk = 0;
chPerQueue =
(pObj->numCh / pObj->createArgs.baseCreateParams.numOutQue);
#ifdef IPC_FRAMES_IN_ENABLE_PROFILE
Utils_prfTsBegin(pObj->stats.tsHandle);
#endif /* IPC_FRAMES_IN_ENABLE_PROFILE
*/
pObj->totalFrameCount += bufList.numFrames;
for (bufId = 0; bufId < bufList.numFrames; bufId++)
{
Bool doFrameDrop;
pFrameBuf = bufList.frames[bufId];
UTILS_assert(pFrameBuf != NULL);
pChObj = &pObj->chObj[pFrameBuf->channelNum];
pChObj->inFrameRecvCount++;
doFrameDrop = Utils_doSkipFrame(&(pChObj->frameSkipCtx));
/* frame skipped due to user setting */
if(doFrameDrop)
{
pChObj->inFrameUserSkipCount++;
UTILS_assert(freeFrameBufList.numFrames <
FVID2_MAX_FVID_FRAME_PTR);
freeFrameBufList.frames[freeFrameBufList.numFrames] =
pFrameBuf;
freeFrameBufList.numFrames++;
pObj->stats.droppedCount++;
continue;
}
queId = (pFrameBuf->channelNum / chPerQueue);
//从队列中取一个buff，赋值给pListElem
status =
Utils_queGet(&pObj->listElemQue, (Ptr *) & pListElem, 1,
BIOS_NO_WAIT);
UTILS_assert(!UTILS_ISERROR(status));
if (status != FVID2_SOK)
{
/* normally this condition should not happen, if it happens
* return the framebuf back to its generator */
#if 0
Vps_printf(" IPC_OUT: Dropping framebuf\n");
#endif
UTILS_assert(freeFrameBufList.numFrames <
FVID2_MAX_FVID_FRAME_PTR);
freeFrameBufList.frames[freeFrameBufList.numFrames] =
pFrameBuf;
freeFrameBufList.numFrames++;
pObj->stats.droppedCount++;
pChObj->inFrameUserSkipCount++;
continue;
}
UTILS_assert(SYSTEM_IPC_FRAMES_GET_BUFSTATE(pListElem->bufState)
== IPC_FRAMEBUF_STATE_FREE);
UTILS_assert(SYSTEM_IPC_FRAMES_GET_BUFOWNERPROCID(pListElem->bufState)
== System_getSelfProcId());
SYSTEM_IPC_FRAMES_SET_BUFSTATE(pListElem->bufState,
IPC_FRAMEBUF_STATE_ALLOCED);
IpcFramesOutLink_copyFrameBufInfo2ListElem(pObj, pListElem, pFrameBuf);
pFrameBuf->timeStamp = curTime;
SYSTEM_IPC_FRAMES_SET_BUFSTATE(pListElem->bufState,
IPC_FRAMEBUF_STATE_OUTQUE);
sendMsgToTsk |= (1 << queId);
//压入到ListMP，提供给IpcFrameInLink(A8)调用；
status =
ListMP_putTail(pObj->listMPOutHndl, (ListMP_Elem *) pListElem);
UTILS_assert(status == ListMP_S_SUCCESS);
pChObj->inFrameProcessCount++;
}
#ifdef IPC_FRAMES_IN_ENABLE_PROFILE
Utils_prfTsEnd(pObj->stats.tsHandle, bufList.numFrames);
#endif /* IPC_FRAMES_IN_ENABLE_PROFILE
*/
if (freeFrameBufList.numFrames)
{
System_putLinksEmptyFrames(pInQueParams->prevLinkId,
pInQueParams->prevLinkQueId,
&freeFrameBufList);
}
/* ProcessLink enable, send the notification to processLink else send to next Link */
//发送通知；
if (pObj->createArgs.baseCreateParams.processLink != SYSTEM_LINK_ID_INVALID)
{
if (pObj->createArgs.baseCreateParams.notifyProcessLink)
{
System_ipcSendNotify(pObj->createArgs.baseCreateParams.processLink);
}
}
else
{
for (queId = 0; queId < pObj->createArgs.baseCreateParams.numOutQue; queId++)
{
if ((pObj->createArgs.baseCreateParams.notifyNextLink) && (sendMsgToTsk & 0x1))
{
System_ipcSendNotify(pObj->createArgs.baseCreateParams.outQueParams[queId].
nextLink);
}
sendMsgToTsk >>= 1;
if (sendMsgToTsk == 0)
break;
}
}
if (pObj->createArgs.baseCreateParams.noNotifyMode)
{
if (FALSE == pObj->prd.clkStarted)
{
IpcFramesOutLink_startPrdObj(pObj,
IPC_FRAMESOUT_LINK_DONE_PERIOD_MS,
FALSE);
}
}
}
return FVID2_SOK;
}
7)IpcFrameInHost（A8）
A8如何获取到数据；
7.1）IpcFramesInLink_tskMain 函数
static
Int IpcFramesInLink_tskMain(struct OSA_TskHndl * pTsk, OSA_MsgHndl * pMsg,
Uint32 curState)
{
UInt32 cmd = OSA_msgGetCmd(pMsg);
Bool ackMsg, done;
Int status = IPC_FRAMES_IN_LINK_S_SUCCESS;
IpcFramesInLink_Obj *pObj = (IpcFramesInLink_Obj *) pTsk->appData;
OSA_printf("%s:Entered", __func__);
if (cmd != SYSTEM_CMD_CREATE)
{
OSA_tskAckOrFreeMsg(pMsg, OSA_EFAIL);
return status;
}
status = IpcFramesInLink_create(pObj, OSA_msgGetPrm(pMsg));
OSA_tskAckOrFreeMsg(pMsg, status);
if (status != OSA_SOK)
return status;
done = FALSE;
ackMsg = FALSE;
while (!done)
{
status = OSA_tskWaitMsg(pTsk, &pMsg);
if (status != OSA_SOK)
break;
cmd = OSA_msgGetCmd(pMsg);
switch (cmd)
{
case SYSTEM_CMD_DELETE:
done = TRUE;
ackMsg = TRUE;
break;
case SYSTEM_CMD_NEW_DATA:
OSA_tskAckOrFreeMsg(pMsg, status);
//OSA_assert(pObj->prd.numPendingCmd > 0);
OSA_mutexLock(&pObj->prd.mutexPendingCmd);
pObj->prd.numPendingCmd--;
OSA_mutexUnlock(&pObj->prd.mutexPendingCmd);
//从ipcOutLink中获取数据
IpcFramesInLink_processFrameBufs(pObj);
break;
case SYSTEM_CMD_STOP:
IpcFramesInLink_stop(pObj);
OSA_tskAckOrFreeMsg(pMsg, status);
break;
default:
OSA_tskAckOrFreeMsg(pMsg, status);
break;
}
}
IpcFramesInLink_delete(pObj);
#ifdef SYSTEM_DEBUG_IPC_FRAMES_IN
OSA_printf(" %d: IPC_FRAMES_IN : Delete Done !!!\n", OSA_getCurTimeInMsec());
#endif
if (ackMsg && pMsg != NULL)
OSA_tskAckOrFreeMsg(pMsg, status);
return IPC_FRAMES_IN_LINK_S_SUCCESS;
}
7.2）IpcFramesInLink_processFrameBufs 调用ListMP_getHead获取listElem，然后
static
Int32 IpcFramesInLink_processFrameBufs(IpcFramesInLink_Obj * pObj)
{
VIDFrame_Buf *pFrameBuf;
SystemIpcFrames_ListElem *pListElem;
UInt32 numFrameBufs;
Int32 status;
UInt32 curTime;
numFrameBufs = 0;
curTime = OSA_getCurTimeInMsec();
while (1)
{
pListElem = ListMP_getHead(pObj->listMPOutHndl);
if (pListElem == NULL)
break;
IpcFramesInLink_getFrameBuf(pObj, pListElem, &pFrameBuf);
OSA_assert(SYSTEM_IPC_FRAMES_GET_BUFSTATE(pListElem->bufState)
== IPC_FRAMEBUF_STATE_OUTQUE);
pListElem->timeStamp = curTime;
pListElem->frameBuf.linkPrivate = (Ptr)pListElem;
SYSTEM_IPC_FRAMES_SET_BUFOWNERPROCID(pListElem->bufState);
SYSTEM_IPC_FRAMES_SET_BUFSTATE(pListElem->bufState,
IPC_FRAMEBUF_STATE_DEQUEUED);
pObj->stats.recvCount++;
//压入队列
status = OSA_quePut(&pObj->outFrameBufQue,
(Int32)pFrameBuf, OSA_TIMEOUT_NONE);
OSA_assert(status == OSA_SOK);
numFrameBufs++;
}
#ifdef SYSTEM_DEBUG_IPC_RT
OSA_printf(" %d: IPC_FRAMES_IN : Recevived %d framebufs !!!\n",
OSA_getCurTimeInMsec(), numFrameBufs);
#endif
if (numFrameBufs)
{
if (pObj->createArgs.cbFxn)
{
pObj->createArgs.cbFxn(pObj->createArgs.cbCtx);
}
}
return IPC_FRAMES_IN_LINK_S_SUCCESS;
}
7.3）IpcFramesInLink_getFullFrames提供给外部api使用(IpcFramesInLink_getFullVideoFrames函数)
static
Int32 IpcFramesInLink_getFullFrames(IpcFramesInLink_Obj * pObj,
VIDFrame_BufList * pFrameBufList)
{
UInt32 idx;
Int32 status;
VIDFrame_Buf *pFrame;
for (idx = 0; idx < VIDFRAME_MAX_FRAME_BUFS; idx++)
{
status =
OSA_queGet(&pObj->outFrameBufQue, (Int32 *) & pFrame,
OSA_TIMEOUT_NONE);
if (status != OSA_SOK)
break;
pFrameBufList->frames[idx] = *pFrame;
}
pFrameBufList->numFrames = idx;
return IPC_FRAMES_IN_LINK_S_SUCCESS;
}
8302
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
