编译mediastreamer2/ffmpeg/linphone(x86平台)

--------------------------在x86环境下编译mediastreamer2的步骤--------------------------------------
1)编译OGG库 音频编解码   http://www.xiph.org/downloads/ 
./configure --prefix=/usr  --disable-static 
2)编译SPEEX  音频编解码
./configure --prefix=/usr --disable-static --enable-fixed-point --disable-float-api  --with-ogg=/usr
3)编译ORTP库   http://download.savannah.gnu.org/releases/linphone/ortp/sources/
./configure --prefix=/usr --disable-static 
--------------------到此即可编译无视频支持mediastream-------------------------
编译mediastream:
./configure --prefix=/usr  --disable-static  --enable-macsnd=no --enable-video=no --enable-tests --disable-gsm PKG_CONFIG_PATH=/usr/lib/pkgconfig 


4) 编译sdl Simple DirectMedia Layer多媒体开发包 :http://www.libsdl.org/
./configure --prefix=/usr --enable-shared 


5) 编译lame MP3编码器 :http://lame.sourceforge.net/download.php
./configure --prefix=/usr --enable-shared 


6) 编译xvid MPEG-4视频编解码器:http://www.xvid.org/
  cd xvidcore/build/generic
 ./configure --prefix=/usr  --enable-shared
  make & make install


7)编译yasm   NASM assembler x264需要用到的汇编编译器:http://yasm.tortall.net/http://download.chinaunix.net/download/0013000/12166.shtml
./configure --prefix=/usr  --enable-shared
  make & make install


8)编译x264 http://download.videolan.org/pub/videolan/x264/snapshots/
./configure --prefix=/usr  --enable-shared
  make & make install


9)编译apr    Apache可移植运行库,为上层的应用程序提供一个可以跨越多操作系统平台使用的底层支持接口库  http所需  http://apr.apache.org/download.cgi
./configure --prefix=/usr  --enable-shared
  make & make install


10)编译 apr_util   http://apr.apache.org/download.cgi
 ./configure --prefix=/usr --with-apr=/usr --enable-shared
make & install


11)编译pcre  是一个Perl库,解决C语言中使用正则表达式的问题 ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/
 ./configure --prefix=/usr --with-apr=/usr --enable-shared
make & install


12) 编译apache http  Web服务器端软件  http://www.apache.org http://mirror.bjtu.edu.cn/apache/httpd/
./configure --with-apr=/usr --with-apr-util=/usr --with-pcre=/usr --enable-shared --prefix=/usr
make & install


运行./http -k start 在浏览器输入http://192.168.1.XXX 测试是否安装成功,若成功则显示:It works!
测试完后要关闭 ./http -k stop


13) 编译 ffmpeg http://ffmpeg.org/download.html
./configure --prefix=/usr --enable-shared --enable-libmp3lame --enable-shared --enable-libxvid --enable-gpl --enable-pthreads --enable-ffserver --enable-ffplay --enable-libx264 --enable-pthreads

--------------------------------至此 ffmpeg编译完成----------------------------------------------------------------------

14)编译 mediastream http://mirror.yongbok.net/nongnu/linphone/mediastreamer/ 
./configure --prefix=/usr  --disable-static   --enable-video=yes --enable-tests --disable-gsm  --enable-ffmpeg --enable-sdl


--------------------------如若要编linphone,需做如下步骤-------------------------


15) 编译osip   libosip2-3.2.0.tar.gz(http://ftp.gnu.org/gnu/osip/)
16) 编译 libeXosip2-3.3.0.tar.gz(http://ftp.twaren.net/Unix/NonGNU/exosip)


17)编译linphone (http://www.linphone.org/index.php/eng/download)
无视频
   ./configure --prefix=/home/ub/MyInstallProgram --disable-video --with-osip=/home/ub/Mylib
有视频
   root@ubuntu:/usr/src/linphone-3.5.2# ./configure --prefix=/home/ubuntu/myinstallprogram/ --enable-video --enable-alsa --with-osip=/usr --with-readline=/usr --with-ffmpeg=/usr --with-sdl=/usr


-----------------------可能遇到的问题------------------------------------
 
 1、编译db
  cd ./db-4.5.20/build_unix
   ../dist/configure --prefix=/usr/local/db-4.5.20
   make & make install




2、
error: Package requirements (gtk+-2.0 >= 2.18.0 gthread-2.0) were not met:
:
sudo apt-get install libperl-dev
sudo apt-get install libgtk2.0-dev


3、没装g++ ,sudo apt-get install g++
error
configure: error: C++ compiler cannot create executables
configure: error: GNU gettext tools not found; required for intltool
sudo apt-get install g++

  • 0
    点赞
  • 4
    收藏
    觉得还不错? 一键收藏
  • 5
    评论
首先接到这一个项目,说是要用mediastreamer2做一个网络电话。之前也是从来没有接触过。于是首先开始在百度中搜索一下需要哪些东西,以及那些步骤。最后大致了解了一下,做这个项目最终要的就是需要移植好多的库,每一个库都需要配置,最后在交叉编译好动态库,然后在执行mediastreamer2的时候去调用这些动态库和头文件就OK了。 1、首先meidastream2是基于ortp库的,那么首先就是下载源码,交叉编译。 交叉编译ortp 下载源码:http://savannah.c3sl.ufpr.br/linphone/ortp/sources/?C=S;O=A 我使用0.18.0版本 ortp-0.18.0.tar.gz 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf ortp-0.18.0.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 把下边这三行写成一个脚本 vim **.sh ./configure CC=arm-linux-gcc --host=arm-linux --target=arm-linux --prefix=/home/protocol_stack/install/ make make install 然后用chmod 777 **.sh 执行脚本./**.sh 这样子就完成了配置,编译,安装。(安装目录为/home/protocol_stack/install/,也就是最后生成的头文件,可执行文件,库文件都会在这个目录下) 2、因为项目是要用到SIP协议的,所以我们还需要移植sip的库 osip2和eXosip2协议,这两个协议对应两个库,osip是简单的osip协议,但是因为API少等一系列原因,增加了eXosip2对osip2的补充。 交叉编译osip2 下载源码:http://ftp.gnu.org/gnu/osip/ 我使用的版本是3.6.0 libosip2-3.6.0.tar.gz 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf libosip2-3.6.0.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 把下边这三行写成一个脚本 vim **.sh ./configure --host=arm-linux --target=arm-linux --prefix=/home/protocol_stack/install/ make make install 然后用chmod 777 **.sh 执行脚本./**.sh 交叉编译eXosip2 下载源码:http://ftp.gnu.org/gnu/osip/ 我使用的版本是3.6.0 libeXosip2-3.6.0.tar.gz 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf libeXosip2-3.6.0.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 把下边这三行写成一个脚本 vim **.sh ./configure --host=arm-linux --target=arm-linux --prefix=/home/protocol_stack/install/ PKG_CONFIG_PATH=/home/protocol_stack/install/lib/pkgconfig make make install 然后用chmod 777 **.sh 执行脚本./**.sh 接下来可以编译mediastreamer2了,不过ms2,依赖好多库:ogg、speex、pulseaudio。而pulseaudio又依赖许多库:alsa、json、libtool。 3、交叉编译ogg 下载源码:http://xiph.org/downloads/ 我使用1.3.1版本 libogg-1.3.3.tar.gz 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf libogg-1.3.3.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 把下边这三行写成一个脚本 vim **.sh ./configure CC=arm-linux-gcc --prefix=/home/protocol_stack/install/ --host=arm-linux make make install 然后用chmod 777 **.sh 执行脚本./**.sh 4、交叉编译speex 下载源码:http://www.speex.org/downloads/ 我使用1.2rc1版本 speex-1.2rc1.tar.gz 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf speex-1.2rc1.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 把下边这三行写成一个脚本 vim **.sh ./configure CC=arm-linux-gcc --prefix=/home/protocol_stack/install/ --with-ogg=/home/protocol_stack/install/ --enable-fixed-point --disable-float-api \ --host=arm-linux make make install 然后用chmod 777 **.sh 执行脚本./**.sh 5、交叉编译pulseaudio 下载源码:http://freedesktop.org/software/pulseaudio/releases/ 我使用1.0版本 pulseaudio-1.0.tar.gz 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf pulseaudio-1.0.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 把下边这三行写成一个脚本 vim **.sh ./configure CC=arm-linux-gcc CXX=arm-linux-g++ --prefix=/home/protocol_stack/install --host=arm-linux --disable-rpath --disable-nls --disable-dbus --disable-bluez --disable-samplerate --disable-solaris --disable-gconf --disable-avahi --disable-jack --disable-lirc --disable-glib2 --disable-gtk2 --disable-openssl --disable-ipv6 --disable-asyncns --disable-per-user-esound-socket --disable-oss-output --disable-oss-wrapper --disable-x11 --enable-neon-opt=no --with-database=simple PKG_CONFIG_PATH=/home/protocol_stack/install/lib/pkgconfig CPPFLAGS=-I/home/protocol_stack/install/include LDFLAGS=-L/home/protocol_stack/install/lib CFLAGS=-I/home/protocol_stack/install/include make make install 然后用chmod 777 **.sh 执行脚本./**.sh 错误1: checking for ltdl.h... no configure: error: Unable to find libltdl version 2. Makes sure you have libtool 2.4 or later installed. make: *** No targets specified and no makefile found. Stop. 分析;找不到libltdl。确保你有libtool 2.4及以上的版本。 下载libtool 2.4.2版本 这时需要交叉编译libtool 下载源码:ftp://ftp.gnu.org/gnu/libtool/ 我使用2.4.2版本 libtool-2.4.2.tar.gz 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf libtool-2.4.2.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 把下边这三行写成一个脚本 vim **.sh ./configure --host=arm-linux --prefix =/home/protocol_stack/install/ make make install 然后用chmod 777 **.sh 执行脚本./**.sh 交叉编译alsa: http://www.alsa-project.org/main/index.php/Main_Page 这个库的版本需要根据你嵌入式Linux内核中alsa的版本而定,可以使用命令查看内核中alsa的版本: # cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. 可以到内核中alsa驱动版本是1.0.24,所以我选1.0.24版本 alsa-lib-1.0.24.1.tar.gz 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf speex-1.2rc1.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 把下边这三行写成一个脚本 vim **.sh ./configure --host=arm-linux --prefix =/home/protocol_stack/install/ make make install 然后用chmod 777 **.sh 执行脚本./**.sh 错误:configure: error: Package requirements ( sndfile >= 1.0.20 ) were not met: No package 'sndfile' found 分析:缺少库 libsndfile库,那么接下来再进行交叉编译libsndfile libsndfile-1.0.25.tar.gz http://www.linuxfromscratch.org/blfs/view/svn/multimedia/libsndfile.html 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf libsndfile-1.0.25.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 把下边这三行写成一个脚本 vim **.sh ./configure --host=arm-linux --prefix =/home/protocol_stack/install/ make make install 然后用chmod 777 **.sh 执行脚本./**.sh 7、最后编译mediastreamer2 下载源码:http://ftp.twaren.net/Unix/NonGNU//linphone/mediastreamer/ 我使用2.8版本 mediastreamer-2.8.0.tar.gz 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf mediastreamer-2.8.0.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 把下边这三行写成一个脚本 vim **.sh ./configure CC=arm-linux-gcc --prefix=/home/protocol_stack/install/ PKG_CONFIG_PATH=/home/protocol_stack/install/lib/pkgconfig --disable-gsm --enable-video=no --enable-macsnd=no --disable-static --disable-sdl --disable-x11 --disable-ffmpeg --host=arm-linux --target=arm-linux make make install 然后用chmod 777 **.sh 执行脚本./**.sh 上面的configure选项没有屏蔽v4l1和v4l2,所以还得交叉编译v4l 编译v4l libv4l-0.6.4.tar.gz 下载源码:http://pkgs.fedoraproject.org/repo/pkgs/libv4l/ 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf libv4l-0.6.4.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 我使用0.6.4版本 libv4l-0.6.4.tar.gz make clean make CC=arm-linux-gcc make install PREFIX=/home/protocol_stack/install 编译mediastreamer2出错:(1)checking for LIBCHECK... no checking for LIBJSON... no configure: error: Package requirements ( json >= 0.9 ) were not met: No package 'json' found 解决方法就是交叉编译json 下载源码:http://ftp.debian.org/debian/pool/main/j/json-c/ 分析:缺少json库,那么我们继续交叉编译json库 json-c_0.12.1.orig.tar.gz 然后通过winshare(Windows和Linux的通信)把下载好的库文件拷贝到Linux下, 然后解压 tar zxvf mediastreamer-2.8.0.tar.gz 注意这个时候可能会发生错误,是没有权限的问题,那么就在命令行前边加上sudo 然后配置 ./configure --host=linux-arm \ --prefix =/home/protocol_stack/install/ make && make install 好了,json库已经编译完成了。接下来我们继续编译mediastreamer2 。。。。。 但是还是有问题,怎么办呢?还是哪个问题还是找不到json库。 分析:在json的论坛中,找到了解决方案:把编译生成的/lib/pkgconfig/这个目录下生成了一个json-c.pc。最后mediastreamer2在调用的时候找的是json.pc。那么我们就把这个文件名改为json.pc #mv json-c.pc json.pc OK,这次这个是可以编译的过去了。接下来继续编译 。。。 又出现问题了 /home/protocol_stack/install/lib/libjson.so: undefined reference to `rpl_malloc' /home/protocol_stack/install/lib/libjson.so: undefined reference to `rpl_realloc' 问题分析: 这个错误的原因是因为没有定义 rpl_malloc 和 rpl_realloc 这两个变量。 那么我们应该怎么办么? 那么就在这个目录下进行查这两个变量是在哪里定义的? 于是:#grep "rpl_malloc" -nR * ....... 找到了,原来这两个变量是在这个config的文件中的。是一个宏开关 那么就好办了,我们就直接把这两个宏进行注释。 嗯嗯,继续。。。我们重新编译json库。。。嗯嗯编译好了,接下来继续来编译mediastreamer2 。。。。 又出错了,还是这个原因 /home/protocol_stack/install/lib/libjson.so: undefined reference to `rpl_malloc' /home/protocol_stack/install/lib/libjson.so: undefined reference to `rpl_realloc 嗯嗯,还是这个原因?究竟是为什么呢。再次来到json的目录下,再次看有没有把那两个宏开关给关闭? 嗯哼? 竟然没有关闭? 分析?明白了。原来是我把配置和编译同时执行了。这个宏开关是./configure ...生成的。 那么就只好,这样。把./configure。。。生成的config文件,再进行关闭宏开关。最后直接make && make install -j8 直接编译,安装,是不能再次进行配置的。因为以配置config文件就会再次生成,那么宏开关就又开了。 OK,安装好了,下来继续进行编译mediastreamer2.。。。。。。。。。。。 。。。。。。。。。。。。。。 又出现了问题? error: /user/include/python2.7/pyconfig.h:15:52: fatal error: arm-linux-gnueabi/python2.7/pyconfig.h: No such file or directory compilation terminated. 分析::找不到arm-linux-gnueabi/python2.7/pyconfig.h这文件。那就继续交叉编译python 好吧,继续下载python,然后再进行交叉编译,但是编译Python的时候出来一系列的问题。根本没有办法解决。 那么该怎么办呢?时候一个小时又一个小时的过去? 最后有一个大胆的想法,既然python都编译不下去。那就不要了。 于是,在mediastreamer2的./configure 中添上一项 --without-python 。 。。。再次配置编译。。。。。。。。。。。 error: /user/include/python2.7/pyconfig.h:15:52: fatal error: arm-linux-gnueabi/python2.7/pyconfig.h: No such file or directory compilation termiated. 嗯哼?还是一样的错误。怎么办呢? 于是乎就又在论坛上进行找灵感。。。。。 还是找不到。。。 又一结合前边几个库的配置编译,发现不使能一个模块还可以用另外一个--disable-python 。。。 于是乎 就把--without-python改为了--disable-python 继续编译。。。。 。。。。。。。。。。。。。。。。。。。。。 到了这个节骨眼上了,编译每跳一下,我的心就跟着逗一下。。。。心酸 。。。。。。 。。。。。。 。。。。。。 竟然编译成功了。。。。 哈哈。。。。。。。。。 于是,马上就把编译好的库,拷贝到了开发板。。。 嗯嗯,本来还想把编译好的库目录树拷贝下的,但是太多了,放不下。。。算了吧。。。。 找到编译好的库 在库中的/bin中找到arm-linux-mediastream 然后执行./arm-linux-mediastream 。。。。报错了 问题: error : while loading shared libraries: libmediastreamer.so.1: cannot open shared object file: No such file 答案:分析: 遇到这个问题就是,libmediastreamer.so.1这个动态库,在可执行文件armlinuxmediastreamer执行的时候,会调用这个动态库,但是环境变量中找不到这个动态库。那么我们就是要把我们编译好的动态链接库的目录加到环境变量中 LD_LIBRARY_PATH=$LD_LIBRARY_PATH://arm/lib/这个目录下就是放着我们编译好的所有的动态链接库(包括libmediastreamer.so.1) 执行步骤:LD_LIBRARY_PATH=$LD_LIBRARY_PATH://arm/lib export LD_LIBRARY_PATH ./arm-linux-mediastream mediastream --local --remote --payload [ --fmtp ] [ --jitter ] [ --width ] [ --height ] [ --bitrate ] [ --ec (enable echo canceller) ] [ --ec-tail ] [ --ec-delay ] [ --ec-framesize ] [ --agc (enable automatic gain control) ] [ --ng (enable noise gate)] [ --ng-threshold (noise gate threshold) ] [ --ng-floorgain (gain applied to the signal when its energy is below the threshold.) ] [ --capture-card ] [ --playback-card ] [ --infile <input wav file> specify a wav file to be used for input, instead of soundcard ] [ --outfile specify a wav file to write audio into, instead of soundcard ] [ --camera ] [ --el (enable echo limiter) ] [ --el-speed (gain changes are smoothed with a coefficent) ] [ --el-thres (Threshold above which the system becomes active) ] [ --el-force (The proportional coefficient controlling the mic attenuation) ] [ --el-sustain (Time in milliseconds for which the attenuation is kept unchanged after) ] [ --el-transmit-thres (TO BE DOCUMENTED) ] [ --rc (enable adaptive rate control) ] [ --zrtp (enable zrtp) ] [ --verbose (most verbose messages) ] [ --video-windows-id <video surface:preview surface>] [ --srtp (enable srtp, master key is generated if absent from comand line) [ --netsim-bandwidth (simulates a network download bandwidth limit) 于是按照第一种方式进行 参数添加 ./arm-linux-mediastream --local 8888 --remote 127.0.0.1:88 88 OK运行正常了 下面是运行信息。。。 ortp-message-audio_stream_process_rtcp: interarrival jitter=119 , lost packets percentage since last report=0.000000, round trip time=0.000000 seconds ortp-message-oRTP-stats: RTP stats : ortp-message- number of rtp packet sent=150 ortp-message- number of rtp bytes sent=25800 bytes ortp-message- number of rtp packet received=150 ortp-message- number of rtp bytes received=25800 bytes ortp-message- number of incoming rtp bytes successfully delivered to the application=25284 ortp-message- number of rtp packet lost=0 ortp-message- number of rtp packets received too late=0 ortp-message- number of bad formatted rtp packets=0 ortp-message- number of packet discarded because of queue overflow=0 ortp-message-Bandwidth usage: download=81.290281 kbits/sec, upload=81.288664 kbits/sec ortp-message-Receiving RTCP SR ortp-message-Receiving RTCP SDES ortp-message-Found CNAME=unknown@unknown ortp-message-Found TOOL=oRTP-0.18.0 ortp-message-Found NOTE=This is free sofware (LGPL) ! ortp-message-Quality indicator : 4.888437 运行正常了。。。。。。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 5
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值