OK2440开发板 ------linux-2.6.12内核配置支持U盘,SD卡

最新推荐文章于 2024-09-20 11:49:47 发布

thinkpadlove

最新推荐文章于 2024-09-20 11:49:47 发布

阅读量3.1k

点赞数

分类专栏： linux——ARM

本文链接：https://blog.csdn.net/dong_zhihong/article/details/8141491

版权

linux——ARM 专栏收录该内容

39 篇文章 0 订阅

订阅专栏

配置内核

1.配置usb host

Device Drivers --->
SCSI device support --->
      <*>   SCSI disk support
USB support --->
      <*> Support for Host-side USB
    [*]   USB verbose debug messages
   ---   Miscellaneous USB options
   [ ]   USB device filesystem
    [ ]   Enforce USB bandwidth allocation (EXPERIMENTAL)
   [ ]   Dynamic USB minor allocation (EXPERIMENTAL)
   ---   USB Host Controller Drivers
   <*>   EHCI HCD (USB 2.0) support
   [ ]     Full speed ISO transactions (EXPERIMENTAL)
   [ ]     Root Hub Transaction Translators (EXPERIMENTAL)
   <*>   Intel ixp435/ixp465 on-chip EHCI HCD support
    < >   ISP116X HCD support
   < >   OHCI HCD support
    < >   UHCI HCD (most Intel and VIA) support
   < >   SL811HS HCD support
   ---   USB Device Class drivers
   < >   USB Modem (CDC ACM) support
   < >   USB Printer support
   --- NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
    --- may also be needed; see USB_STORAGE Help for more information
    <*> USB Mass Storage support

[*] USB Mass Storage verbose debug

2 配置SD卡

   MMC/SD Card support --->
   <*> MMC support
        [*]   MMC debugging

<*> MMC block device driver

3.配置usb和sd卡支持的文件系统(一般usb都以vfat格式，所以此处选择支持vfat)

File systems --->
   DOS/FAT/NT Filesystems --->
       <*> MSDOS fs support
        <*> VFAT (Windows-95) fs support
       (437) Default codepage for FAT
        (iso8859-1) Default iocharset for FAT
        <*> NTFS file system support
        [ ]   NTFS debugging support

[*] NTFS write support

4 重新编译内核，

make zImage

5 烧写新内核到开发板，用DNW的USB下载

6.重启开发板，进入文件系统后，在/dev下面建立两个设备节点:

mknod /dev/sdb1 b 8 17(usb)
mknod /dev/sda1 b 8 1 (sd)

在我的系统linux-2.6.12，u盘被识别为/dev/sda1，然后使用命令mount /dev/sda1 /mnt 挂载，

cd /mnt

ls -l

就会看到你U盘里的所有文件