- 11G RAC 配置NTP服务器
- tip01的IP:162.20.1.228 NTP服务端
- tip02的IP:162.20.1.229 NTP客户端
- 配置NTP服务器之前,确认服务器已装好NTP包
- [root@tip01 ~]# rpm -qa | grep ntp
- ntp-4.2.2p1-9.el5_4.1
- chkfontpath-1.10.1-1.1
- 然后再把服务器的系统时钟与硬件时间同步一下
- 先查看下系统
- [root@tip01 ~]# date
- 2012年05月20日 星期日 22:07:01 CST
- 查看硬件时钟
- [root@tip01 ~]# hwclock
- 2012年05月20日 星期日 13时33分46秒 -0.415712 seconds
- 这里,系统时钟与硬件时钟不同步,我们通过以下命令来把硬件时钟与系统时钟同步
- [root@tip01 ~]# clock --systohc
- 在查看下系统时钟与硬件时钟,已经同步了
- [root@tip01 ~]# date
- 2012年 05月20日 星期日 22:08:07 CST
- [root@tip01 ~]# hwclock
- 2012年 05月20日 星期日 22时08分12秒 -0.154372 seconds
- [root@tip01 ~]#
- 编辑tip01节点的配置文件
- # vi /etc/ntp.conf
- restrict default kod nomodify notrap nopeer noquery
- restrict -6 default kod nomodify notrap nopeer noquery
- restrict 127.0.0.1
- restrict -6 ::1
- server 162.20.1.228 #
- server 127.127.1.0 #local clock
- fudge 127.127.1.0 stratum 10
- driftfile /var/lib/ntp/drift
- keys /etc/ntp/keys
- restrict 162.20.1.228 mask 255.255.255.255 nomodify notrap noquery
- 编辑tip02节点ntp.conf文件
- # vi /etc/ntp.conf
- server tip01
- restrict tip01 mask 255.255.255.255 nomodify notrap noquery
- 3.分别在tip01,tip02上修改NTPD参数文件
- #vi /etc/sysconfig/ntpd
- SYNC_HWCLOCK=yes
- OPTIONS="-x -u ntp:ntp -p /var/run/ntpd.pid"
- #RAC安装时需要检测的-x参
- # cd /etc/ntp
- # ls
- keys ntpservers step-tickers
- # more ntpservers
- #This file contains a list of ntp servers to show in the system-config-date user interface.
- #It is not recommended that you modify this file by hand.
- #添加ntp 服务器地址或者主机名
- tip01
- 注:注意查看step-tickers内容,如果step-tickers错误也会导致ntp不同步
- # more step-tickers
- #
- 在tip01,tip02上执行chkconfig,使NTP服务开机启动
- [root@tip01 ~]# chkconfig ntpd on
- [root@tip02 ~]# chkconfig ntpd on
- [root@tip01 ~]# service ntpd restart
- 关闭 ntpd:[确定]
- ntpd: 同步时间服务器:[失败]
- 启动 ntpd:[确定]
- 确保该端口以udp方式开放。
- [root@tip01 ~]# netstat -an |grep 123
- udp 0 0 192.168.99.228:123 0.0.0.0:*
- udp 0 0 162.20.1.228:123 0.0.0.0:*
- udp 0 0 127.0.0.1:123 0.0.0.0:*
- udp 0 0 0.0.0.0:123 0.0.0.0:*
- udp 0 0 ::1:123 :::*
- udp 0 0 fe80::250:56ff:fe9d:123 :::*
- udp 0 0 :::123 :::*
- 查看ntp状态
- [root@tip01 ~]# ntpstat
- synchronised to local net at stratum 11
- time correct to within 11 ms
- polling server every 1024 s
- 在tip02节点启动ntp服务
- [root@tip02 ~]# service ntpd start
- ntpd: 同步时间服务器:[确定]
- 同步硬件时钟到系统时钟 [确定]
- 启动 ntpd:[确定]
- 切换至事先配好的grid用户来验证两节点时间
- [grid@tip02 ~]$ ssh tip01 date
- 2012年 05月 20日 星期日 22:21:46 CST
- [grid@tip02 ~]$ ssh tip02 date
- 2012年 05月 20日 星期日 22:21:48 CST
-
转载自http://blog.csdn.net/evils798/article/details/7583769,感谢原作者小魔!