WPS学习

需要wps 2.0的帧结构，或者支持的竞品。

On the wireless packet sniffer device, verify that the Selected Registrar flag, Device Password ID and Selected Registrar Configuration Methods attributes in the WSC IE of the Beacon and Probe Response frame are NOT present after the successful WSC handshake

需要如下设备

1. 支持生成4位PIN码的客户端；

2. 可配置为EAP-WSC( supports EAP-WSC fragmentation )

3. 支持WPS2.0的设备

4. 

4.1  Config APUT

4.1.1 

如果WSC State的值为0x01，则

The Probe Response frame from the APUT must include：Manufacturer, Model Name, Model Number, Serial Number, Device Name。

M2

Manufacturer, Model Name, Model Number, Serial Number, and Device Name. These attributes must not use NULL-padding, i.e., the last octet of the attribute value must not be 0x00。

uthentication Type Flags and Encryption Type Flags。

Connection Type Flags attribute。 The Connection Type Flags value shall be 0x01(ESS).

Device Password ID attribute

WSC State set to Configured (0x02)

目前存在的问题：Manufacturer 为空 Primary Device Type为空；

config method in M2，依然有一些问题，需要修改。应该改成：268C(Lable Pin, virual PIN/PBC, PHY PBC)

4.1.5 PBC walk time

为了同步LCD，UI，我在WPS里面把整个session的时间，从120 sec调整到了118秒，是否需要改回去。如果改回去的话，其他模块是否需要修改，特别是GUI部分。

4.1.8

 [测试步骤] 

step 4. The internal Registrar must inform the user that security is not set and require confirmation or require explicit user operation to create this open network. 

[GUI] 请李勇勇评估。

4.1.13 APUT correctly uses AuthorizedMACs subelement in the WFA Vendor Extension attribute in Beacons and Probe Responses 

Test Requirement: The APUT must support PIN method. The APUT may support selection of the STA to commence the PIN registration process from a list on its user interface. 
 

4.2

4.2.2 

XXX 需要支持4位的Pin码

4.2.4 Mixed mode test with PIN including whitespace and manually add a legacy WPA device,请GUI的同事注意。

4.2.10

[测试步骤] 

3.  Turn on STA2 and configure it to fragment EAP-WSC messages.

4. Read the PIN displayed on STA2 and enter the PIN in the internal Registrar on the APUT. The APUT must be able to complete WSC protocol withfragmented EAP-WSC messages. 

 我司是否有这样的STA。

4.2.12 Check correctness of APUT association procedure

Test Requirement: ... The APUT must include the WSC IE in the 802.11 Association Response frame.The APUT must ignore the Privacy subfield of the Capability information field in the Association Request frame. The APUT must ignore the RSN IE and the WPA IE if present in the Association Request frame. If the APUT supports WMM it must continue to comply with the WMM requirements. The APUT must be backwards compatible and accept association from a version 1.0 WSC STA. 

XXX，当前不支持在assoc response中含有WPS IE。  

The APUT must ignore the RSN IE and the WPA IE if present in the Association Request frame.

针对这个问题，需要考虑测试策略。

4.2.13 需要实现冲突检测，添加发送消息。LCD是否需要处理？

WM340目前的实现，如果这样操作，系统会将进入异常流程。需要enhance

4.3

4.4

4.4.1 Protocol extensibility with STA 

对于STA WPS IE中还有的特殊字段，比如WPS2.0中为定义的字段，应该如何处理。

未完待续。