两种配置大数据环境的方法Ambari以及hadoop源代码安装的步骤

最新推荐文章于 2023-03-11 17:22:42 发布

shiter

最新推荐文章于 2023-03-11 17:22:42 发布

阅读量3.9k

点赞数

1.Ambari安装

Ambari & HDP（Hortonworks Data Platform）
*****************************************************************************************************
Base：
0.操作系统原则与对应的HDP对应的版本。rhel6 or rhel7
1.操作系统原则完全安装(Desktop)，所有的包都安装。
2.关闭防火墙，IPV6等服务（海涛Python脚本）。SELinux-->>IPv6-->>Iptables
_____________________________________________________________

SELINUX:

vim /etc/selinux/config
SELINUX=disabled
或者：
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config;
_____________________________________________________________
IPV6：

chkconfig ip6tables off

cat>>/etc/modprobe.d/ECS.conf<<EOF
alias net-pf-10 off
alias ipv6 off
EOF

cat>>/etc/sysconfig/network<<EOF
NETWORKING_IPV6=off
EOF

cat>>/etc/modprobe.d/disable-ipv6.conf<<EOF
install ipv6 /bin/true
EOF

cat>>/etc/modprobe.d/dist.conf<<EOF
alias net-pf-10 off
alias ipv6 off
EOF

cat>>/etc/sysctl.conf<<EOF
net.ipv6.conf.all.disable_ipv6 = 1
EOF
_____________________________________________________________

iptables:

chkconfig iptables off
_____________________________________________________________
ONBOOT:
sed -i 's/ONBOOT=no/ONBOOT=yes/g' /etc/sysconfig/network-scripts/ifcfg-eth0
sed -i 's/ONBOOT=no/ONBOOT=yes/g' /etc/sysconfig/network-scripts/ifcfg-eth1
sed -i 's/ONBOOT=no/ONBOOT=yes/g' /etc/sysconfig/network-scripts/ifcfg-eth2
sed -i 's/ONBOOT=no/ONBOOT=yes/g' /etc/sysconfig/network-scripts/ifcfg-eth3
sed -i 's/ONBOOT=no/ONBOOT=yes/g' /etc/sysconfig/network-scripts/ifcfg-eth4
_____________________________________________________________

Swap Closed

cat >> /etc/sysctl.conf << EOF
vm.swappiness=0
EOF
_____________________________________________________________
Time Zone:

cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
_____________________________________________________________

*****************************************************************************************************
/etc/sysconfig/network
Hostname
*****************************************************************************************************

/etc/hosts:

127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost
172.31.200.7 data1
172.31.200.8 data2
172.31.200.9 data3

why not?

127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
172.31.200.7 data1
172.31.200.8 data2
172.31.200.9 data3
*****************************************************************************************************

PackageKit

pkill -9 packagekitd
vim /etc/yum/pluginconf.d/refresh-packagekit.conf
enabled=0

*****************************************************************************************************

THP(Transparent Huge Pages):

echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled
echo never > /sys/kernel/mm/redhat_transparent_hugepage/defrag

*****************************************************************************************************

ulimit & nproc

[root@data2 yum.repos.d]# vim /etc/security/limits.conf

soft nproc 16384
hard nproc 16384
soft nofile 65536
hard nofile 65536
*****************************************************************************************************

REBOOT all the machine

*****************************************************************************************************
REPO for rhel:

first:

[root@server2 opt]# cd /etc/yum.repos.d/
[root@server2 yum.repos.d]# ls -al

drwxr-xr-x. 2 root root 4096 3月 22 04:02 .
drwxr-xr-x. 182 root root 16384 4月 14 22:27 ..
-rw-r--r--. 1 root root 1991 10月 23 2014 CentOS-Base.repo
-rw-r--r--. 1 root root 647 10月 23 2014 CentOS-Debuginfo.repo
-rw-r--r--. 1 root root 289 10月 23 2014 CentOS-fasttrack.repo
-rw-r--r--. 1 root root 630 10月 23 2014 CentOS-Media.repo
-rw-r--r--. 1 root root 5394 10月 23 2014 CentOS-Vault.repo
-rw-r--r--. 1 root root 270 12月 15 14:36 cloudera.repo
-rw-r--r--. 1 root root 134 12月 8 08:31 rhel65.repo

rm -rf ALL
---->>>>>>we don't get internet connection.

second:

[root@data2 yum.repos.d]# cat centos6.6.repo
[centos6]
name=cloudera
baseurl=http://172.31.200.216/centos6
enabled=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release

scp /etc/yum.repos.d/centos6.6.repo root@Hostname:/etc/yum.repos.d/

yum clean all
yum search lib*

*****************************************************************************************************

SSH:
yum install openssl
yum upgrade openssl

rm -rf ~/.ssh/*
ssh-keygen -t rsa -f ~/.ssh/id_rsa -N ''
cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys

scp -r ~/.ssh root@172.31.200.8:~/.ssh
chmod 600 ~/.ssh
注意：chmod 777 为什么不行？？？
*****************************************************************************************************

jdk:

rpm -ivh jdk-7XXX-linux-XXXX.rpm
echo "JAVA_HOME=/usr/java/latest/">> /etc/environment
java -version
*****************************************************************************************************
NTP:

ntp-master node

[root@data1 yum.repos.d]# vim /etc/ntp.conf

server data1 prefer
server 127.127.1.0
fudge 127.127.1.0 stratum 10

service ntpd restart
[root@data1 yum.repos.d]# chkconfig --list ntpd

ntp-master node

/var/spool/cron/root<<EOF
*/10 * * * * /usr/sbin/ntpdate NameNode && /sbin/clock -w
EOF

service ntpd restart

ntpdate -u NameNode

*****************************************************************************************************

/var/www/html：

which httpd

or

yum install httpd

tar -xzf HDP-UTILS-1.1.0.20-centos6.tar.gz
tar -xzf AMBARI-2.1.2-377-centos6.tar.gz
tar -xzf HDP-2.3.0.0-centos6-rpm.tar.gz

check whether the listening port of http service is blocked.
---->>>>netstat -nltp | grep 80
---->>>>vim /etc/httpd/conf/httpd.conf
change value of the default port

service httpd start

*****************************************************************************************************
Repo for HDP & Ambari

[root@data2 yum.repos.d]# cat ambari.repo
[Updates-ambari-2.1.2]
name=ambari-2.1.2-Updates
baseurl=http://data1/AMBARI-2.1.2/centos6
gpgcheck=0
enabled=1

[HDP-2.3.0.0]
name=HDP Version-HDP-2.3.0.0
baseurl=http://data1/HDP/centos6/2.x/updates/2.3.0.0
gpgcheck=0
enabled=1

[HDP-UTILS-1.1.0.20]
name=HDP Utils Version - HDP-UTILS-1.1.0.20
baseurl=http://data1/HDP-UTILS-1.1.0.20/repos/centos6
gpgcheck=0
enabled=1

scp /etc/yum.repos.d/ambari.repo root@Hostname:/etc/yum.repos.d/
yum clean all
yum search ambari-agent
yum search Oozie
yum search gangli

*****************************************************************************************************

SO Address:

http://172.31.200.7/HDP/centos6/2.x/updates/2.3.0.0
http://172.31.200.7/HDP-UTILS-1.1.0.20/repos/centos6

*****************************************************************************************************
yum clean all
yum search ambari-server
yum search ambari-agent
yum search oozie
yum remove *****

Master：
yum install ambari-server
yum install ambari-agent
ambari-agent start
conf of ambari server:
/etc/ambari-server/conf/ambari.properties

Slave:
yum install ambari-agent
ambari-agent start

ambari-server start

ambari-server setup -j /usr/java/jdk1.7.0_71/
--->>>>Run the setup command to configure your Ambari Server, Database, JDK, LDAP, and other options:
--->>>>enter numeric number(n means default)
ambari-server start

http://MasterHostName:8080
Account：admin Password:admin

*****************************************************************************************************

Logs to see student:
See the log:

cat /var/log/ambari-agent/ambari-agent.lo

cat /var/log/ambari-server/ambari-server.log

*****************************************************************************************************

To Do:

HDFS:
[root@data1 yum.repos.d]# su hdfs -c "hadoop fs -ls /"
[root@data1 yum.repos.d]# su hdfs -c "hadoop fs -mkdir /lgd"

MR:

Spark:

HBase:

Hive:

ES:

*******************************************************************************************************

FAQ

1, The hostname of the machine better be Fully Qualified Domain Name---->>>>>>>hoastname.domain,such as,data.hdp.worker1

2, Zookeeper-Agent端修改Server指向的HOSTNAME, /etc/ambari-agent/conf/ambari-agent.ini,如修改过主机hostname
安装失败后或重新安装先执行ambari-server reset 后 ambari-setup
3, 最后一步安装可能会失败,多数原因是下载包错误引起的,可重复安装直到成功,本人反复几个最终成功了,网络,网络,尤其就朝民,各种干扰!
4, 如果遇到访问https://xxx:8440/ca的错误，升级openssl就可以。
5，Heartbeat lost for the host错误，检查出错节点的ambari-agent是否停止，ambari-angent是python脚本运行的，
可能遇到没有捕捉到的异常，导致进程crash或者停止了。
6，App Timeline server安装出错，retry解决。
7，如果出现乱码：echo 'LANG="en_US.UTF-8"' > /etc/sysconfig/i18n,修改字符集即可解决！
8, 如果安装linux的时候基础包未选择，缺包可以制作cdrom挂载，来安装即可解决！
9, selinux开启导致本地yum源访问403
10, centosos6.5 openssh 版本bug 导致 agent安装失败,解决 yum upgrade openssl
11,

*******************************************************************************************************

总结：

1，日志查看，追溯问题。
2，如果要安装一切顺利，可在安装操作系统时把linux基础组件一并安装！
补救方案为：
yum groupinstall "Compatibility libraries" "Base" "Development tools"
yum groupinstall "debugging Tools" "Dial-up Networking Support"

3，

*******************************************************************************************************
备注: + Ambari安装的环境路径:

各台机器的安装目录:

/usr/lib/hadoop
/usr/lib/hbase
/usr/lib/zookeeper
/usr/lib/hcatalog
/usr/lib/hive

+ Log路径, 这里需要看出错信息都可以在目录下找到相关的日志

/var/log/hadoop
/var/log/hbase

+ 配置文件的路径

/etc/hadoop
/etc/hbase
/etc/hive

+ HDFS的存储路径

/hadoop/hdfs

*******************************************************************************************************

其他1：

安装过程中使用了桌面，火狐等安装命令
yum install firefox
yum groupinstall -y “Desktop” “Desktop Platform” “Desktop Platform
Development”　 “Fonts” 　“General Purpose Desktop”　 “Graphical
Administration Tools”　 “Graphics Creation Tools” 　“Input Methods” 　“X
Window System” 　“Chinese Support [zh]”　“Internet Browser”
iso yum 源来安装一些基础包
sudo mount -o loop /home/whoami/rhel-server-6.7-x86_64-dvd.iso /mnt/cdimg/
$ cat rhel-source.repo
[rhel-Server]
name=Red Hat Server
baseurl=file:///mnt/cdimg
enable=1
gpgcheck=0

*******************************************************************************************************

其他2：

Ambari配置时在Confirm Hosts的步骤时，中间遇到一个很奇怪的问题：总是报错误：
Ambari agent machine hostname (localhost.localdomain) does not match expected ambari server hostname (xxx).
后来修改的/etc/hosts文件中
修改前：
127.0.0.1 xxx localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 xxx localhost localhost.localdomain localhost6 localhost6.localdomain6
修改后：
127.0.0.1 xxx localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 xxx
感觉应该是走的ipv6协议，很奇怪，不过修改后就可以了。

2.hadoop源代码配置

首先配置hosts文件关联主机名和ip地址
host1=
host2=
host3=

=== security shell
rm -rf ~/.ssh/*
ssh-keygen -t rsa -f ~/.ssh/id_rsa -N ''
ssh-copy-id -o StrictHostKeyChecking=no $remothostname
ssh $remothostname hostname

######################## Hadoop cluster deploy
1. tar -xzf hadoop-2.7.1.tar.gz
2. add profile
Shell> cat << EOF >/etc/profile.d/hadoop.sh
#!/bin/sh
export JAVA_HOME=/root/BIGDATA/jdk1.8.0_65
export HADOOP_PREFIX=/root/BIGDATA/hadoop-2.7.1

export HADOOP_HOME=\$HADOOP_PREFIX
export HADOOP_CONF_DIR=\$HADOOP_HOME/etc/hadoop
export YARN_CONF_DIR=\$HADOOP_HOME/etc/hadoop

export JAVA_LIBRARY_PATH=\$HADOOP_HOME/lib/native:\$JAVA_LIBRARY_PATH
export LD_LIBRARY_PATH=\$HADOOP_HOME/lib/native:\$LD_LIBRARY_PATH
export CLASSPATH=.:\$JAVA_HOME/lib/dt.jar:\$JAVA_HOME/lib/tools.jar:
export PATH=\$JAVA_HOME/bin:\$HADOOP_HOME/bin:\$HADOOP_HOME/sbin:\${PATH}
EOF

Shell> source /etc/profile

3. create hdfs dirs on all hosts

HADOOP_LOCAL_BASE_DIR=/opt/local/hdfs

mkdir -p ${HADOOP_LOCAL_BASE_DIR}
mkdir -p ${HADOOP_LOCAL_BASE_DIR}/dfs/data
mkdir -p ${HADOOP_LOCAL_BASE_DIR}/dfs/name
mkdir -p ${HADOOP_LOCAL_BASE_DIR}/dfs/snn
mkdir -p ${HADOOP_LOCAL_BASE_DIR}/tmp
mkdir -p ${HADOOP_LOCAL_BASE_DIR}/yarn/logs

4. config etc/hadoop/
1. add all slaves to slaves
bigdata1
bigdata3

2.
HADOOP_DFS_MASTER=masternode
HADOOP_DFS_SECONDARY_NAMENODE=masternode
YARN_RESOURCE_MANAGER=masternode
JOBHISTORY_SERVER=masternode
JOBTRACKRT_HOST=masternode
HADOOP_TOOL_INSTALL_DIR=/root/BIGDATA/DOCS/hadoop_doc/hadoop_demo
#core-site.xml
conf_file=core-site.xml
cp -raf ${HADOOP_TOOL_INSTALL_DIR}/${conf_file} ${HADOOP_PREFIX}/etc/hadoop/
sed -i "s^\${HADOOP_LOCAL_BASE_DIR}^${HADOOP_LOCAL_BASE_DIR}^g" "${HADOOP_PREFIX}/etc/hadoop/${conf_file}"
sed -i "s^\${HADOOP_DFS_MASTER}^${HADOOP_DFS_MASTER}^g" "${HADOOP_PREFIX}/etc/hadoop/${conf_file}"
#hdfs-site.xml
conf_file=hdfs-site.xml
cp -raf ${HADOOP_TOOL_INSTALL_DIR}/${conf_file} ${HADOOP_PREFIX}/etc/hadoop/
sed -i "s^\${HADOOP_LOCAL_BASE_DIR}^${HADOOP_LOCAL_BASE_DIR}^g" "${HADOOP_PREFIX}/etc/hadoop/${conf_file}"
sed -i "s^\${HADOOP_DFS_SECONDARY_NAMENODE}^${HADOOP_DFS_SECONDARY_NAMENODE}^g" "${HADOOP_PREFIX}/etc/hadoop/${conf_file}"
sed -i "s^\${HADOOP_DFS_MASTER}^${HADOOP_DFS_MASTER}^g" "${HADOOP_PREFIX}/etc/hadoop/${conf_file}"
#mapreducesite.xml
conf_file=mapred-site.xml
cp -raf ${HADOOP_TOOL_INSTALL_DIR}/${conf_file} ${HADOOP_PREFIX}/etc/hadoop/
sed -i "s^\${JOBTRACKRT_HOST}^${JOBTRACKRT_HOST}^g" "${HADOOP_PREFIX}/etc/hadoop/${conf_file}"
sed -i "s^\${JOBHISTORY_SERVER}^${JOBHISTORY_SERVER}^g" "${HADOOP_PREFIX}/etc/hadoop/${conf_file}"
#yarn-site.xml
conf_file=yarn-site.xml
cp -raf ${HADOOP_TOOL_INSTALL_DIR}/${conf_file} ${HADOOP_PREFIX}/etc/hadoop/
sed -i "s^\${YARN_RESOURCE_MANAGER}^${YARN_RESOURCE_MANAGER}^g" "${HADOOP_PREFIX}/etc/hadoop/${conf_file}"
sed -i "s^\${HADOOP_LOCAL_BASE_DIR}^${HADOOP_LOCAL_BASE_DIR}^g" "${HADOOP_PREFIX}/etc/hadoop/${conf_file}"

5. init namenode
Shell>hdfs namenode -format cluster1
6. start all
Shell>$HADOOP_HOME/sbin/start-all.sh
Shell> $HADOOP_HOME/sbin/mr-jobhistory-daemon.sh start historyserver

===Hadoop check
1. After deploy hadoop.
Shell>hadoop checknative -a
Shell>hadoop jar ${HADOOP_HOME}/share/hadoop/mapreduce/hadoop-mapreduce-examples-2.7.1.jar pi 4 100

Shell> cat <<EOF >/tmp/file1
Hello World Bye World
EOF
Shell> cat <<EOF >/tmp/file2
Hello Hadoop Goodbye Hadoop
EOF

Shell> hadoop fs -mkdir /tmp
Shell> hadoop fs -copyFromLocal -f /tmp/file1 /tmp/file2 /tmp
Shell> hadoop jar ${HADOOP_HOME}/share/hadoop/mapreduce/hadoop-mapreduce-examples-2.7.1.jar wordcount /tmp/file1 /tmp/file2 /tmp/wordcount
Shell> hadoop fs -cat /tmp/wordcount/part-r-00000

===hadoop Daemon Web Interface
NameNode http://nn_host:port/ Default HTTP port is 50070.
ResourceManager http://rm_host:port/ Default HTTP port is 8088.
#MapReduce JobHistory Server http://jhs_host:port/ Default HTTP port is 19888.

######################## Spark cluster deploy
1. tar -xzf spark-1.6.1-bin-hadoop2.6.tgz
2. add profile
cat << EOF >>/etc/profile.d/hadoop.sh
export SPARK_HOME=/root/BIGDATA/spark-1.6.1-bin-hadoop2.6
export PATH=\${SPARK_HOME}/sbin:\${PATH}:\${SPARK_HOME}/bin:

EOF

Shell>source /etc/profile

3. create local dir
SPARK_LOCAL_BASE_DIR=/opt/local/spark

Shell>mkdir -p ${SPARK_LOCAL_BASE_DIR}/tmp

Shell>hadoop fs -mkdir /sparkHistoryLogs /sparkEventLogs
4. config
1. add all slaves to slaves
Shell>mv slaves.template slaves
bigdata1
bigdata3

2.
SPARK_MASTER=masternode
HADOOP_DFS_MASTER=masternode

Shell> cat << EOF > ${SPARK_HOME}/conf/spark-defaults.conf
spark.master spark://${SPARK_MASTER}:7077
spark.local.dir ${SPARK_LOCAL_BASE_DIR}/tmp
spark.master.rest.port 7177
#Spark UI
spark.eventLog.enabled true
spark.eventLog.dir hdfs://${HADOOP_DFS_MASTER}:9000/sparkEventLogs
spark.ui.killEnabled true
spark.ui.port 4040
spark.history.ui.port 18080
spark.history.fs.logDirectory hdfs://${HADOOP_DFS_MASTER}:9000/sparkHistoryLogs

#
spark.shuffle.service.enabled false

#
spark.yarn.am.extraJavaOptions -Xmx3g
spark.executor.extrajavaoptions -Xmx3g

#Amount of memory to use for the YARN Application Master in client mode
spark.yarn.am.memory 2048m
#The amount of off-heap memory (in megabytes) to be allocated per executor.
spark.yarn.driver.memoryOverhead 512
#The amount of off-heap memory (in megabytes) to be allocated per driver in cluster mode
spark.yarn.executor.memoryOverhead 512
#Same as spark.yarn.driver.memoryOverhead, but for the YARN Application Master in client mode, fix yarn-client OOM, "ERROR yarn.ApplicationMaster: RECEIVED SIGNAL 15: SIGTERM"
spark.yarn.am.memoryOverhead 1024

EOF

Shell> cat << EOF > ${SPARK_HOME}/conf/spark-env.sh
SPARK_WORKER_WEBUI_PORT=8081
SPARK_WORKER_DIR=\${SPARK_HOME}/work
#SPARK_LOCAL_DIRS=\${SPARK_WORKER_DIR}
EOF

5. start all
Shell> ${SPARK_HOME}/sbin/start-all.sh
check cluster status
http://${SPARK_MASTER}:8080

===Spark Daemon Web Interface
spark.history.ui.port 18080
spark master 8080

http://${SPARK_MASTER}:port/

===Spark check

1. Spark Standalone (client, cluster(spark.master.rest.port))
# Run application locally on 1 cores
Shell> ${SPARK_HOME}/bin/spark-submit \
--class org.apache.spark.examples.SparkPi \
--master spark://masternode:7077 \
--deploy-mode client \
${SPARK_HOME}/lib/spark-examples*.jar \
10

# Run on a Spark standalone cluster
Shell> ${SPARK_HOME}/bin/spark-submit \
--class org.apache.spark.examples.SparkPi \
--master spark://$SPARK_MASTER:7177 \
--deploy-mode cluster \
--executor-memory 1G \
--total-executor-cores 1 \
${SPARK_HOME}/lib/spark-examples*.jar \
10

#spark shell
Shell> ${SPARK_HOME}/bin/spark-shell --master spark://$SPARK_MASTER:7077

2. Spark on Yarn (It needn't start spark cluster, only need start hadoop)
#run yarn-client
Shell> ${SPARK_HOME}/bin/spark-submit --class org.apache.spark.examples.SparkPi \
--master yarn-client \
--driver-java-options '-Xmx3096m' \
--conf spark.executor.extrajavaoptions=-Xmx3096m \
--executor-memory 3096m \
--num-executors 1 \
--conf spark.yarn.am.memoryOverhead=1024 \
${SPARK_HOME}/lib/spark-examples*.jar \
10


#run yarn-cluster
Shell> ${SPARK_HOME}/bin/spark-submit --class org.apache.spark.examples.SparkPi \
--master yarn \
--deploy-mode cluster \
--driver-memory 2g \
--executor-memory 2g \
${SPARK_HOME}/lib/spark-examples*.jar \
10

######################## Hbase cluster deploy
1. Shell> tar -xzf hbase-1.1.4-bin.tar.gz
2. add profile
cat << EOF >>/etc/profile.d/hadoop.sh
export HBASE_HOME=/root/BIGDATA/hbase-1.1.4
export PATH=\${PATH}:\${HBASE_HOME}/bin:

EOF

Shell>source /etc/profile

3. create local dir
HBASE_ROOTDIR=/hbase
HBASE_TMP_DIR=/opt/local/hbase

Shell> hadoop fs -mkdir ${HBASE_ROOTDIR}
Shell> mkdir -p ${HBASE_TMP_DIR}
4. config
1. add all hosts to regionservers
bigdata1
bigdata2

2. modify hbase-site.xml
cat <<EOF >${HBASE_HOME}/conf/hbase-site.xml
<configuration>
<property>
<name>hbase.rootdir</name>
<value>hdfs://masternode:9000/hbase </value>
<description>The directory shared by RegionServers.
Default: \${hbase.tmp.dir}/hbase
</description>
</property>
<property>
<name>hbase.zookeeper.quorum</name>
<value>masternode,slavesnode</value>
<description>The directory shared by RegionServers.
</description>
</property>
<property>
<name>hbase.tmp.dir</name>
<value>/opt/local/hbase</value>
<description>Temporary directory on the local filesystem
Default: \${java.io.tmpdir}/hbase-${user.name}.
</description>
</property>
<property>
<name>hbase.cluster.distributed</name>
<value>true</value>
<description>The mode the cluster will be in. Possible values are
false: standalone and pseudo-distributed setups with managed Zookeeper
true: fully-distributed with unmanaged Zookeeper Quorum (see hbase-env.sh)
</description>
</property>


</configuration>
EOF
3. ln -s $HADOOP_HOME/etc/hadoop/hdfs-site.xml ${HBASE_HOME}/conf/hdfs-site.xml
4. ulimit 咿nproc
cat <<EOF > /etc/security/limits.conf
root - nofile 32768
root soft/hard nproc 32000
EOF

5. start all
Shell> ${HBASE_HOME}/bin/start-hbase.sh

===Hbase Daemon Web Interface
hbase.master.info.port 16010
hbase.regionserver.info.port 16030

http://${HBASE_MASTER}:port/

===Hbase check

1. run hbase shell
Shell> ${HBASE_HOME}/bin/hbase shell

hbase(main):003:0> create 'test', 'cf'
0 row(s) in 1.2200 seconds
hbase(main):003:0> list 'table'
test
1 row(s) in 0.0550 seconds
hbase(main):004:0> put 'test', 'row1', 'cf:a', 'value1'
0 row(s) in 0.0560 seconds
hbase(main):005:0> put 'test', 'row2', 'cf:b', 'value2'
0 row(s) in 0.0370 seconds
hbase(main):006:0> put 'test', 'row3', 'cf:c', 'value3'
0 row(s) in 0.0450 seconds

hbase(main):007:0> scan 'test'
ROW COLUMN+CELL
row1 column=cf:a, timestamp=1288380727188, value=value1
row2 column=cf:b, timestamp=1288380738440, value=value2
row3 column=cf:c, timestamp=1288380747365, value=value3
3 row(s) in 0.0590 seconds

hbase(main):008:0> get 'test', 'row1'
COLUMN CELL
cf:a timestamp=1288380727188, value=value1
1 row(s) in 0.0400 seconds

hbase(main):012:0> disable 'test'
0 row(s) in 1.0930 seconds
hbase(main):013:0> drop 'test'
0 row(s) in 0.0770 seconds

hbase(main):014:0> exit

######################## Hive cluster deploy
1. tar -xzf apache-hive-2.0.0-bin.tar.gz
2. add profile
cat << EOF >>/etc/profile.d/hadoop.sh
export HIVE_HOME=/root/BIGDATA/apache-hive-2.0.0-bin
export HIVE_CONF_DIR=\${HIVE_HOME}/conf
export PATH=\${HIVE_HOME}/bin:\${PATH}

EOF

Shell>source /etc/profile

3. create local dir
$HADOOP_HOME/bin/hadoop fs -mkdir /tmp
$HADOOP_HOME/bin/hadoop fs -mkdir -p /user/hive/warehouse
$HADOOP_HOME/bin/hadoop fs -chmod g+w /tmp
$HADOOP_HOME/bin/hadoop fs -chmod g+w /user/hive/warehouse

Shell> mkdir -p ${HBASE_TMP_DIR}

4. config
=M1. [ Local Embedded Derby ]
HIVE_LOCAL_WAREHOUSE=/opt/hive/warehouse
Shell> mkdir -p ${HIVE_LOCAL_WAREHOUSE}

Shell>cat <<EOF > ${HIVE_CONF_DIR}/hive-site.xml
<configuration>
<property>
<name>javax.jdo.option.ConnectionURL</name>
<value>jdbc:derby:;databaseName=metastore_db;create=true</value>
<description>JDBC connect string for a JDBC metastore</description>
</property>

<property>
<name>javax.jdo.option.ConnectionDriverName</name>
<value>org.apache.derby.jdbc.EmbeddedDriver</value>
<description>Driver class name for a JDBC metastore</description>
</property>

<property>
<name>javax.jdo.option.ConnectionUserName</name>
<value>APP</value>
<description>username to use against metastore database</description>
</property>

<property>
<name>javax.jdo.option.ConnectionPassword</name>
<value>mine</value>
<description>password to use against metastore database</description>
</property>

<property>
<name>hive.metastore.warehouse.dir</name>
<value>${HIVE_LOCAL_WAREHOUSE}</value>
<description>unit test data goes in here on your local filesystem</description>
</property>

</configuration>
EOF

Shell> $HIVE_HOME/bin/schematool -initSchema -dbType derby
Shell> $HIVE_HOME/bin/schematool -dbType derby-info
Shell> $HIVE_HOME/bin/hive

=M2. [Remote Metastore Server Derby]
Shell> tar -xzf db-derby-10.12.1.1-bin.tar.gz
Shell> cd db-derby-10.12.1.1-bin
Shell> mkdir data
Shell> cd data
Shell> ../bin/startNetworkServer -h 172.31.200.110 -p 1527 &
Shell> cp -raf ../lib/derbyclient.jar ../lib/derbytools.jar $HIVE_HOME/lib/

DERBY_SERVER_HOST=masternode

Shell>cat <<EOF > ${HIVE_CONF_DIR}/hive-site.xml
<configuration>
<property>
<name>javax.jdo.option.ConnectionURL</name>
<value>jdbc:derby://${DERBY_SERVER_HOST}:1527/hive_meta;create=true</value>
<description>JDBC connect string for a JDBC metastore</description>
</property>

<property>
<name>javax.jdo.option.ConnectionDriverName</name>
<value>org.apache.derby.jdbc.ClientDriver</value>
<description>Driver class name for a JDBC metastore</description>
</property>

<property>
<name>datanucleus.schema.autoCreateAll</name>
<value>true</value>
<description>creates necessary schema on a startup if one doesn't exist. set this to false, after creating it once</description>
</property>

<property>
<name>javax.jdo.option.ConnectionUserName</name>
<value>app</value>
<description>username to use against metastore database</description>
</property>

<property>
<name>javax.jdo.option.ConnectionPassword</name>
<value>app</value>
<description>password to use against metastore database</description>
</property>

<property>
<name>hive.metastore.warehouse.dir</name>

<value>/user/hive/warehouse</value>
<description>base hdfs path :location of default database for the warehouse</description>
</property>



<property>
<name>hive.metastore.uris</name>
<value>thrift://masternode:9083</value>
</property>
</configuration>
EOF

#start metastore service
$HIVE_HOME/bin/hive --service metastore &

#star thiveserver service
$HIVE_HOME/bin/hiveserver2 &

5. start
$HIVE_HOME/bin/hive
hive> CREATE TABLE pokes (foo INT, bar STRING);
hive> CREATE TABLE invites (foo INT, bar STRING) PARTITIONED BY (ds STRING);
hive> SHOW TABLES;
hive> SHOW TABLES '.*s';
hive> DESCRIBE invites;

hive> LOAD DATA LOCAL INPATH '/root/BIGDATA/apache-hive-2.0.0-bin/examples/files/kv1.txt' OVERWRITE INTO TABLE pokes;

======#
#Remote Metastore Server
$HIVE_HOME/bin/hive --service metastore -p 9083
#Running HiveServer2 and Beeline
$HIVE_HOME/bin/hiveserver2
$HIVE_HOME/bin/beeline -u jdbc:hive2://localhost:10000
#Running HCatalog
$HIVE_HOME/hcatalog/sbin/hcat_server.sh
$HIVE_HOME/hcatalog/bin/hcat
#Running WebHCat
$HIVE_HOME/hcatalog/sbin/webhcat_server.sh

####### pig
2. add profile
cat << EOF >>/etc/profile.d/hadoop.sh
export PIG_HOME=/BIGDATA/pig-0.15.0
export PATH=\${PIG_HOME}/bin:\${PATH}

EOF

Shell>source /etc/profile

shiter

关注

0
点赞
踩
1

收藏

觉得还不错? 一键收藏
0
评论
两种配置大数据环境的方法Ambari以及hadoop源代码安装的步骤

1.Ambari安装Ambari & HDP（Hortonworks Data Platform）*****************************************************************************************************Base：0.操作系统原则与对应的HDP对应的版本。rhel6 or
复制链接

扫一扫