Linux inode cache机制分析
蓝森林 http://www.lslnet.com 2002年11月8日 16:24
作 者: 詹荣开 (詹荣开 zhanrk@sohu.com) Linux inode cache机制实现在fs/inode.c文件中。
1.1.Inode的slab分配器缓存 索引节点缓存(inode cache,简称icache)机制的实现是以inode对象的slab分配器缓存为基础的,因此要从物理内存中申请或释放一个inode对象,都必须通过kmem_cache_alloc()函数和kmem_cache_free()函数来进行。 Inode对象的slab分配缓存由一个kmem_cache_t类型的指针变量inode_cachep来定义。这个slab分配器缓存是在inode cache的初始化函数inode_init()中通过kmem_cache_create()函数来创建的。 Linux在inode.c文件中又定义了两个封装函数,来实现从inode_cachep slab分配器缓存中分配一个inode对象或将一个不再使用的inode对象释放给slab分配器,如下所示: #define alloc_inode() / ((struct inode *) kmem_cache_alloc(inode_cachep, SLAB_KERNEL)) static void destroy_inode(struct inode *inode) { if (!list_empty(&inode->i_dirty_buffers)) BUG(); kmem_cache_free(inode_cachep, (inode)); } 1.2 和inode对象相关的一些底层操作 源文件inode.c中实现了一些对inode对象的底层基本操作,如下: (1)clean_inode()——初始化部分inode对象成员域 该函数用来将一个刚从inode_cachep slab分配器中分配得到的inode对象中的某些成员初始化为已知的值(通常为0),但是有一个例外,既链接数i_nlink被初始化为1。这是一个静态的静态内部函数,因此它只能被inode.c中的其他函数所调用,如:get_empty_inode()和get_new_inode()。 /* * This just initializes the inode fields * to known values before returning the inode.. * * i_sb, i_ino, i_count, i_state and the lists have * been initialized elsewhere.. */ static void clean_inode(struct inode *inode) { static struct address_space_operations empty_aops; static struct inode_operations empty_iops; static struct file_operations empty_fops; memset(&inode->u, 0, sizeof(inode->u)); inode->i_sock = 0; inode->i_op = &empty_iops; inode->i_fop = &empty_fops; inode->i_nlink = 1; /* NOTE!i_nlink被初始化为1 */ atomic_set(&inode->i_writecount, 0); inode->i_size = 0; inode->i_generation = 0; memset(&inode->i_dquot, 0, sizeof(inode->i_dquot)); inode->i_pipe = NULL; inode->i_bdev = NULL; inode->i_data.a_ops = &empty_aops; inode->i_data.host = inode; inode->i_mapping = &inode->i_data; } (2)get_empty_inode()——从slab分配器中分配一个空的inode对象 该函数通过调用alloc_inode宏从slab分配器中分配一个inode对象,然后把除了I_count引用计数和链接计数I_nlink之外的所有域都初始化为NULL(部分域的初始化通过调用clean_inode函数来完成),并将这个inode对象链入inode_in_use链表中。最后返回这个inode对象的指针,如下所示: struct inode * get_empty_inode(void) { static unsigned long last_ino; struct inode * inode; inode = alloc_inode(); if (inode) { spin_lock(&inode_lock); inodes_stat.nr_inodes++; list_add(&inode->i_list, &inode_in_use); inode->i_sb = NULL; inode->i_dev = 0; inode->i_ino = ++last_ino; inode->i_flags = 0; atomic_set(&inode->i_count, 1); inode->i_state = 0; spin_unlock(&inode_lock); clean_inode(inode); } return inode; } Linux内核模块通常并不会调用这个函数来分配一个inode对象。那些想获取一个没有索引节点号的inode对象的内核模块(如网络层等),以及那些没有任何已知信息的fs,通常会用这个函数来获取一个新的inode对象。 (3) clear_inode()——清除一个inode对象中的内容 在调用destroy_inode()函数释放一个inode对象之前,通常调用该函数来清除该inode对象中内容,如:使inode引用的缓冲区无效、解除对其它对象的引用等。 /** * clear_inode - clear an inode * @inode: inode to clear * * This is called by the filesystem to tell us * that the inode is no longer useful. We just * terminate it with extreme prejudice. */ void clear_inode(struct inode *inode) { if (!list_empty(&inode->i_dirty_buffers)) invalidate_inode_buffers(inode); if (inode->i_data.nrpages) BUG(); if (!(inode->i_state & I_FREEING)) BUG(); if (inode->i_state & I_CLEAR) BUG(); wait_on_inode(inode); if (IS_QUOTAINIT(inode)) DQUOT_DROP(inode); if (inode->i_sb && inode->i_sb->s_op && inode->i_sb->s_op->clear_inode) inode->i_sb->s_op->clear_inode(inode); if (inode->i_bdev) { bdput(inode->i_bdev); inode->i_bdev = NULL; } inode->i_state = I_CLEAR; } 1.3 icache数据结构 Linux通过在inode_cachep slab分配器缓存之上定义各种双向链表来实现inode缓存机制,以便有效地管理内存inode对象。这些链表包括:正在使用的inode链表、未使用的inode链表、inode哈希链表和匿名inode的哈希链表,他们的定义如下: static LIST_HEAD(inode_in_use); static LIST_HEAD(inode_unused); static struct list_head *inode_hashtable; static LIST_HEAD(anon_hash_chain); /* for inodes with NULL i_sb */ 此外,每个超级块对象super_block中还有一条被修改过的、且正在使用的inode双向链表s_dirty。 每一个inode对象都会存在于两个分离的双向链表中: (1)一个就是inode哈希链表inode_hashtable,用来加快inode查找,每个inode对象都通过I_hash指针链入哈希链表中。 (2)另一个就是inode的“类型”链表: l 如果I_count>0、I_nlink>0且该inode不脏,则这个inode就通过其I_list指针链入系统全局的inode_in_use双向链表。 l 如果I_count和I_nlink都大于0,但是这个inode为脏(既I_state域中设置了I_DIRTY标志),则这个inode通过I_list指针链入他所属的super_block对象的s_dirty链表。 l 如果I_count=0,则通过其I_list链入inode_unused链表。 对于那些不属于任何超级块对象(即I_sb=NULL)的匿名inode对象,则通过I_hash指针链入系统全局的匿名inode哈希链表anon_hash_chain。 1.3.1 对inode缓存链表的锁保护 Linux在inode.c中定义了自旋锁inode_lock,来实现对所有inode缓存链表的互斥访问。也即,任何访问任意一条inode缓存链表的代码段,都必须通过调用spin_lock()函数持有该自旋锁,并在结束访问后通过spin_unlock()释放该自旋锁。Inode_lock的定义如下: Spinlock_t inode_lock=SPIN_LOCK_UNLOCKED; NOTE!如果要改变一个正在使用的inode对象的I_state域,也必须先持有该自旋锁。 1.3.2 inode缓存的统计信息 全局变量inodes_stat定义了inode cache的统计信息,主要包括cache中的inode对象总数和其中未使用的inode个数,其定义如下: struct { int nr_inodes; int nr_unused; int dummy[5]; } inodes_stat; 1.3.3 inode哈希链表 inode哈希链表的主要用途是加快在icache中查找一个特定的inode对象。指针inode_hashtable指向一组哈希链表表头,所有哈希函数值(记为h)相同的inode对象都通过I_hash指针作为接口组成双向链表,并挂在inode_hashtable[h]这个哈希链表表头之后。所有哈希链表表头都放在一起组成一个数组,该数组的首地址由指针inode_hashtable所指向。 在Linux中,inode哈希链表表头数组是存放在2order个连续的物理页帧中的,其中,order≥1,且它的值与系统总的物理页帧数num_physpages的值相关。因此,哈希链表表头的个数为:2order*PAGE_SIZE/sizeof(struct list_head)。由于list_head结构类型的大小是8个字节(2个32位指针),因此:inode哈希链表表头的个数可以表示为:2(order+12-3)。 l 哈希链表的初始化 inode cache的初始化工作是由inode_init()函数来完成的,它主要完成两项工作:(1)inode哈希链表的初始化,包括为inode哈希链表表头数组分配物理内存等;(2)创建inode slab分配器缓存。该函数的源代码如下: /* * Initialize the hash tables. */ void __init inode_init(unsigned long mempages) { struct list_head *head; unsigned long order; unsigned int nr_hash; int i; /*计算order的值,但是我不知道为什么要这样计算?:) */ mempages >>= (14 - PAGE_SHIFT); mempages *= sizeof(struct list_head); for (order = 0; ((1UL << order) << PAGE_SHIFT) < mempages; order++) ; do { unsigned long tmp; nr_hash = (1UL << order) * PAGE_SIZE / sizeof(struct list_head); i_hash_mask = (nr_hash - 1); tmp = nr_hash; i_hash_shift = 0; while ((tmp >>= 1UL) != 0UL) i_hash_shift++; inode_hashtable = (struct list_head *) __get_free_pages(GFP_ATOMIC, order); } while (inode_hashtable == NULL && --order >= 0); printk("Inode-cache hash table entries: %d (order: %ld, %ld bytes)/n", nr_hash, order, (PAGE_SIZE << order)); if (!inode_hashtable) panic("Failed to allocate inode hash table/n"); head = inode_hashtable; i = nr_hash; do { INIT_LIST_HEAD(head); head++; i--; } while (i); /* inode slab cache */ inode_cachep = kmem_cache_create("inode_cache", sizeof(struct inode), 0, SLAB_HWCACHE_ALIGN, init_once, NULL); if (!inode_cachep) panic("cannot create inode slab cache"); } 函数注释如下: (1)函数首先计算inode哈希链表表头数组所需的连续物理页帧数(最大可能的order值)。 (2)然后在do…while循环中,尝试分配2order个连续的物理页帧。如果分配失败,则将order减1,然后在重新开始分配。如果直到order=0(既1页)时还是分配失败(inode_hashtable=NULL),则退出do…while循环,并通过panic()函数终止内核初始化过程。 (3)上述每次do…while循环中,在分配物理内存之前,函数都会首先计算哈希链表表头数组的位掩码(I_hash_mask)和位数(I_hash_shift)。其中,位掩码I_hash_mask=nr_hash-1,nr_hash是inode哈西链表表头的个数。而I_hash_shift实际上就等于(order+12-3)。 I_hash_mask和I_hash_shift的定义如下: #define I_HASHBITS i_hash_shift #define I_HASHMASK i_hash_mask static unsigned int i_hash_mask; static unsigned int i_hash_shift; (4)在成功分配物理内存之后,函数开始对inode哈希链表表头数组中的表头进行初始化,也即通过INIT_LIST_HEAD宏将每一个表头中的prev、next指针初始化为指向自己。 (5)最后,函数通过调用kmem_cache_create()函数创建inode对象的slab分配器缓存inode_cachep。 l 计算一个inode对象的哈希散列值 Linux唯一确定一个inode对象的值是二元组(设备号,索引节点号),而设备号与超级块对象是一一对应的,因此,哈希散列值计算函数hash以super_block对象和索引节点号I_ino为参数。如下: static inline unsigned long hash(struct super_block *sb, unsigned long i_ino) { unsigned long tmp = i_ino | ((unsigned long) sb / L1_CACHE_BYTES); tmp = tmp + (tmp >> I_HASHBITS) + (tmp >> I_HASHBITS*2); return tmp & I_HASHMASK; } l 对inode哈希链表的操作函数 与inode哈希链表相关的操作函数有:insert_inode_hash()和remove_inode_hash(),以及find_inode()。 Insert_inode_hash()函数用于将一个未散列的inode对象插入到相应的索引节点哈希链表中: void insert_inode_hash(struct inode *inode) { struct list_head *head = &anon_hash_chain; if (inode->i_sb) head = inode_hashtable + hash(inode->i_sb, inode->i_ino); spin_lock(&inode_lock); list_add(&inode->i_hash, head); spin_unlock(&inode_lock); } remove_inode_hash()函数用于将一个inode对象从他所属的哈希链表中摘除: void remove_inode_hash(struct inode *inode) { spin_lock(&inode_lock); list_del(&inode->i_hash); INIT_LIST_HEAD(&inode->i_hash); spin_unlock(&inode_lock); } 而find_inode()函数则用于在某个链表中查找由(sb,ino)唯一标识的inode对象,如下所示: /* * Called with the inode lock held. * NOTE: we are not increasing the inode-refcount, you must call __iget() * by hand after calling find_inode now! This simplifies iunique and won't * add any additional branch in the common code. */ static struct inode * find_inode(struct super_block * sb, unsigned long ino, struct list_head *head, find_inode_t find_actor, void *opaque) { struct list_head *tmp; struct inode * inode; tmp = head; for (;;) { tmp = tmp->next; inode = NULL; if (tmp == head) break; inode = list_entry(tmp, struct inode, i_hash); if (inode->i_ino != ino) continue; if (inode->i_sb != sb) continue; if (find_actor && !find_actor(inode, ino, opaque)) continue; break; } return inode; } NOTE! 调用find_inode()函数时一定要持有inode_lock锁。 1.4 icache中的inode对象存取接口——iget/iput 1.4.1 iget()——引用一个inode对象 其他内核模块要想访问一个inode对象,必须通过iget()访问接口。该函数会首先在icache的哈希链表中查找相应的inode对象,如果找到,则将该对象的引用计数加1,然后返回该inode对象的指针。如果没有找到,则通过调用get_new_inode()函数分配一个新的inode对象。该函数的源代码如下所示(include/linux/fs.h): static inline struct inode *iget(struct super_block *sb, unsigned long ino) { return iget4(sb, ino, NULL, NULL); } 可以看出,实际的工作是由iget4()函数(带有4个参数的iget函数,所以叫iget4)来完成的,其源码如下(inode.c): struct inode *iget4(struct super_block *sb, unsigned long ino, find_inode_t find_actor, void *opaque) { struct list_head * head = inode_hashtable + hash(sb,ino); struct inode * inode; spin_lock(&inode_lock); inode = find_inode(sb, ino, head, find_actor, opaque); if (inode) { __iget(inode); spin_unlock(&inode_lock); wait_on_inode(inode); return inode; } spin_unlock(&inode_lock); /* * get_new_inode() will do the right thing, re-trying the search * in case it had to block at any point. */ return get_new_inode(sb, ino, head, find_actor, opaque); } NOTE: (1)首先,通过散列函数hash找到该inode对象应该在那个哈希链表中,然后调用find_inode()函数在该哈希链表中查找是否存在该inode对象。。 (2)如果在哈希链表中找到了相应的inode对象(由超级块对象指针sb和索引节点号ino唯一确定),则先调用__iget()函数增加该inode对象的引用计数。然后调用wait_on_inode()函数等待该inode对象被其他内核模块解锁。最后,直接返回这个inode对象的指针。 (3)如果没有找到,则调用get_new_inode()函数分配一个新的inode对象。 内联函数__iget()用来增加一个inode对象的引用计数。该函数首先判断inode对象的I_count的当前值。如果它非0,则将I_count加1后就直接返回。如果它为0,则先将I_count加1,然后就看看这个inode对象当前是否为脏,如果为脏(I_state&I_DIRTY非0),那就什么也不做,让该inode对象继续待在超级块对象的s_dirty链表中。如果不为脏,则将该inode对象从原来的“类型”链表(应该在inode_unused链表中)中删除,并将其连入到inode_in_use链表中。最后将icache统计信息中的未使用inode个数减1。 static inline void __iget(struct inode * inode) { if (atomic_read(&inode->i_count)) { atomic_inc(&inode->i_count); return; } atomic_inc(&inode->i_count); if (!(inode->i_state & I_DIRTY)) { list_del(&inode->i_list); list_add(&inode->i_list, &inode_in_use); } inodes_stat.nr_unused--; } wait_on_inode()函数测试一个inode对象是否已经被加锁,如果是,则调用__wait_on_inode()函数等待该inode被解锁。否则就直接返回: static inline void wait_on_inode(struct inode *inode) { if (inode->i_state & I_LOCK) __wait_on_inode(inode); } get_new_inode()函数用于得到一个新的inode对象。该函数首先调用alloc_inode宏从inode_cachep这个slab分配器缓存中分配一个新的inode对象。如下所示: static struct inode * get_new_inode(struct super_block *sb, unsigned long ino, struct list_head *head, find_inode_t find_actor, void *opaque) { struct inode * inode; inode = alloc_inode(); if (inode) { struct inode * old; spin_lock(&inode_lock); /* We released the lock, so.. */ old = find_inode(sb, ino, head, find_actor, opaque); if (!old) { inodes_stat.nr_inodes++; list_add(&inode->i_list, &inode_in_use); list_add(&inode->i_hash, head); inode->i_sb = sb; inode->i_dev = sb->s_dev; inode->i_ino = ino; inode->i_flags = 0; atomic_set(&inode->i_count, 1); inode->i_state = I_LOCK; spin_unlock(&inode_lock); clean_inode(inode); sb->s_op->read_inode(inode); /* * This is special! We do not need the spinlock * when clearing I_LOCK, because we're guaranteed * that nobody else tries to do anything about the * state of the inode when it is locked, as we * just created it (so there can be no old holders * that haven't tested I_LOCK). */ inode->i_state &= ~I_LOCK; wake_up(&inode->i_wait); return inode; } /* * Uhhuh, somebody else created the same inode under * us. Use the old inode instead of the one we just * allocated. */ __iget(old); spin_unlock(&inode_lock); destroy_inode(inode); inode = old; wait_on_inode(inode); } return inode; } (1)由于在调用get_new_inode函数时,调用者已经释放了inode_lock锁,因此在inode_lock被释放到调用get_new_inode函数期间,其他内核模块有可能已经创建了(sb,ino)所确定的索引节点。所以,get_new_inode函数必须重新调用find_inode函数,以再一次在哈希链表中查找是否已存在相应的inode对象。 (2)如果find_inode()返回一个有效的指针,则说明其它模块已经创建了(sb,ino)这个inode对象,因此就要调用destroy_inode()函数来销毁一开始创建的inode对象,然后调用__iget()函数增加所找到的inode对象的引用计数,然后用wait_on_inode()函数等待他被解锁。 (3)如果find_inode()返回NULL,则对先前所分配的inode对象进行初始化。其中,要调用clean_inode()函数和超级块的s_op->read_inode()方法,以从块设备上读取磁盘索引节点的内容。最后,返回所分配的inode对象的指针。 1.4.2 iput()函数——释放对一个inode对象的引用 当其他内核对象或模块不再需要一个inode对象时,必须通过iput()函数,来解除对该inode对象的引用。 iput()函数将inode对象的引用计数减1。如果减到了0,则将该inode释放。否则就直接返回。 /** * iput - put an inode * @inode: inode to put * * Puts an inode, dropping its usage count. If the inode use count hits * zero the inode is also then freed and may be destroyed. */ void iput(struct inode *inode) { if (inode) { struct super_operations *op = NULL; if (inode->i_sb && inode->i_sb->s_op) op = inode->i_sb->s_op; if (op && op->put_inode) op->put_inode(inode); if (!atomic_dec_and_lock(&inode->i_count, &inode_lock)) return; if (!inode->i_nlink) { list_del(&inode->i_hash); INIT_LIST_HEAD(&inode->i_hash); list_del(&inode->i_list); INIT_LIST_HEAD(&inode->i_list); inode->i_state|=I_FREEING; inodes_stat.nr_inodes--; spin_unlock(&inode_lock); if (inode->i_data.nrpages) truncate_inode_pages(&inode->i_data, 0); if (op && op->delete_inode) { void (*delete)(struct inode *) = op->delete_inode; /* s_op->delete_inode internally recalls clear_inode() */ delete(inode); } else clear_inode(inode); if (inode->i_state != I_CLEAR) BUG(); } else { if (!list_empty(&inode->i_hash)) { if (!(inode->i_state & I_DIRTY)) { list_del(&inode->i_list); list_add(&inode->i_list, &inode_unused); } inodes_stat.nr_unused++; spin_unlock(&inode_lock); return; } else { /* magic nfs path */ list_del(&inode->i_list); INIT_LIST_HEAD(&inode->i_list); inode->i_state|=I_FREEING; inodes_stat.nr_inodes--; spin_unlock(&inode_lock); clear_inode(inode); } } destroy_inode(inode); } } 对该函数的注释如下: (1)函数首先调用超级块对象中的s_op->put_inode()方法(如果有的话)来释放这个inode对象。 (2)通过atomic_dec_and_lock原子操作将I_count减1,并同时对inode_lock进行加锁。如果I_count在减1后还为非0值,则直接返回。否则就进行下面的处理。 (3)如果该inode的i_nlink值为0,则说明文件系统中已经没有任何文件链接到这个inode对象上。对于这种情况,iput()先将这个inode从其所属的哈希链表和“类型”链表中摘除。然后在其i_count中设置I_FREEING标志,表示正在释放这个inode对象。最后,看看是否定义了超级块对象方法s_op->delete_inode(),如果有则调用该方法删除相应的磁盘索引节点,如果未定义该方法,则调用clear_inode()函数来清除这个inode对象。最后,用destroy_inode()将这个内存索引节点释放给inode_cachep slab分配器缓存。 (4)如果该inode的i_nlink不为0,则说明虽然没有人引用这个inode对象,但fs中还有文件链接与这个inode对象相关联,因此这个inode对象有可能再次被引用。对于这种情况,iput()函数首先判断这个inode对象是否正连接在哈希链表中。如果是,则将这个inode对象放到inode_unused链表中(当然,前提是这个inode对象不在s_dirty链表中,如果他在s_dirty链表中,则让他继续待在s_dirty链表中),然后直接返回就可以了。如果不是,则这个inode对象已经不用继续留在icache中了(反正通过哈希链表也找不到他),因此将这个inode对象从其所属的“类型”链表中摘除,然后调用clear_inode()方法清除这个inode对象,最后调用destroy_indoe()将这个内存索引节点释放回inode_cachep slab分配器缓存。注意!这里不能调用超级块对象的delete_inode()方法来删除对应的磁盘索引节点,因为fs中还有文件链接与这个inode相关联。 |