strcat(连接两字符串) |
相关函数
| bcopy,memccpy,memcpy,strcpy,strncpy
|
表头文件
| #include <string.h>
|
定义函数
| char *strcat (char *dest,const char *src);
|
函数说明
| strcat()会将参数src字符串拷贝到参数dest所指的字符串尾。第一个参数dest要有足够的空间来容纳要拷贝的字符串。
|
返回值
| 返回参数dest的字符串起始地址
|
范例
| #include <string.h.> main() { char a[30]="string(1)"; char b[]="string(2)"; printf("before strcat() : %s/n",a); printf("after strcat() : %s/n",strcat(a,b)); }
|
执行
| before strcat () : string(1) after strcat () : string(1)string(2)
|
|
| strchr(查找字符串中第一个出现的指定字符) |
相关函数
| index,memchr,rinex,strbrk,strsep,strspn,strstr,strtok
|
表头文件
| #include<string.h>
|
定义函数
| char * strchr (const char *s,int c);
|
函数说明
| strchr()用来找出参数s字符串中第一个出现的参数c地址,然后将该字符出现的地址返回。
|
返回值
| 如果找到指定的字符则返回该字符所在地址,否则返回0。
|
范例
| #include<string.h> main() { char *s=0123456789012345678901234567890”; char *p; p=strchr(s,'5'); printf("%s/n",p); }
|
执行
| 5.68E+25
|
|
| strcmp(比较字符串) |
相关函数
| bcmp,memcmp,strcasecmp,strncasecmp,strcoll
|
表头文件
| #include<string.h>
|
定义函数
| int strcmp(const char *s1,const char *s2);
|
函数说明
| strcmp()用来比较参数s1和s2字符串。字符串大小的比较是以ASCII 码表上的顺序来决定,此顺序亦为字符的值。strcmp()首先将s1第一个字符值减去s2第一个字符值,若差值为0则再继续比较下个字符,若差值不为0则将差值返回。例如字符串"Ac"和"ba"比较则会返回字符"A"(65)和'b'(98)的差值(-33)。
|
返回值
| 若参数s1和s2字符串相同则返回0。s1若大于s2则返回大于0的值。s1若小于s2则返回小于0 的值。
|
范例
| #include<string.h> main() { char *a="aBcDeF"; char *b="AbCdEf"; char *c="aacdef"; char *d="aBcDeF"; printf("strcmp(a,b) : %d/n",strcmp(a,b)); printf("strcmp(a,c) : %d/n",strcmp(a,c)); printf("strcmp(a,d) : %d/n",strcmp(a,d)); }
|
执行
| strcmp(a,b) : 32 strcmp(a,c) :-31 strcmp(a,d) : 0
|
|
| strcoll(采用目前区域的字符排列次序来比较字符串) |
相关函数
| strcmp,bcmp,memcmp,strcasecmp,strncasecmp
|
表头文件
| #include<string.h>
|
定义函数
| int strcoll( const char *s1, const char *s2);
|
函数说明
| strcoll()会依环境变量LC_COLLATE所指定的文字排列次序来比较s1和s2 字符串。
|
返回值
| 若参数s1和s2字符串相同则返回0。s1若大于s2则返回大于0的值。s1若小于s2则返回小于0 的值。
|
附加说明
| 若LC_COLLATE为"POSIX"或"C",则strcoll()与strcmp()作用完全相同。
|
范例
| 参考strcmp()。
|
|
| strcpy(拷贝字符串) |
相关函数
| bcopy,memcpy,memccpy,memmove
|
表头文件
| #include<string.h>
|
定义函数
| char *strcpy(char *dest,const char *src);
|
函数说明
| strcpy()会将参数src字符串拷贝至参数dest所指的地址。
|
返回值
| 返回参数dest的字符串起始地址。
|
附加说明
| 如果参数dest所指的内存空间不够大,可能会造成缓冲溢出(buffer Overflow)的错误情况,在编写程序时请特别留意,或者用strncpy()来取代。
|
范例
| #include<string.h> main() { char a[30]="string(1)"; char b[]="string(2)"; printf("before strcpy() :%s/n",a); printf("after strcpy() :%s/n",strcpy(a,b)); }
|
执行
| before strcpy() :string(1) after strcpy() :string(2)
|
|
| strcspn(返回字符串中连续不含指定字符串内容的字符数) |
相关函数
| strspn
|
表头文件
| #inclued<string.h>
|
定义函数
| size_t strcspn ( const char *s,const char * reject);
|
函数说明
| strcspn()从参数s字符串的开头计算连续的字符,而这些字符都完全不在参数reject 所指的字符串中。简单地说,若strcspn()返回的数值为n,则代表字符串s开头连续有n个字符都不含字符串reject内的字符。
|
返回值
| 返回字符串s开头连续不含字符串reject内的字符数目。
|
范例
| #include <string.h> main() { char *str="Linux was first developed for 386/486-based pcs."; printf("%d/n",strcspn(str," ")); printf("%d/n",strcspn(str,"/-")); printf("%d/n",strcspn(str,"1234567890")); }
|
执行
| 5 /*只计算到“ ”的出现,所以返回“Linux”的长度*/ 33 /*计算到出现“/”或“-”,所以返回到“6”的长度*/ 30 /* 计算到出现数字字符为止,所以返回“3”出现前的长度*/
|
|
| strdup(复制字符串) |
相关函数
| calloc,malloc,realloc,free
|
表头文件
| #include<string.h>
|
定义函数
| char * strdup( const char *s);
|
函数说明
| strdup()会先用maolloc()配置与参数s字符串相同的空间大小,然后将参数s字符串的内容复制到该内存地址,然后把该地址返回。该地址最后可以利用free()来释放。
|
返回值
| 返回一字符串指针,该指针指向复制后的新字符串地址。若返回NULL表示内存不足。
|
范例
| #include<string.h> main() { char a[]="strdup"; char *b; b=strdup(a); printf("b[ ]=/"%s/"/n",b); }
|
执行
| b[ ]="strdup"
|
|
| strlen(返回字符串长度) |
相关函数
|
|
表头文件
| #include<string.h>
|
定义函数
| size_t strlen (const char *s);
|
函数说明
| strlen()用来计算指定的字符串s的长度,不包括结束字符"/0"。
|
返回值
| 返回字符串s的字符数。
|
范例
| /*取得字符串str的长度*/ #include<string.h> main() { char *str = "12345678"; printf("str length = %d/n", strlen(str)); }
|
执行
| str length = 8
|
|
| strncasecmp(忽略大小写比较字符串) |
相关函数
| bcmp,memcmp,strcmp,strcoll,strncmp
|
表头文件
| #include<string.h>
|
定义函数
| int strncasecmp(const char *s1,const char *s2,size_t n);
|
函数说明
| strncasecmp()用来比较参数s1和s2字符串前n个字符,比较时会自动忽略大小写的差异。
|
返回值
| 若参数s1和s2 字符串相同则返回0。s1 若大于s2则返回大于0的值,s1若小于s2则返回小于0 的值。
|
范例
| #include<string.h> main() { char *a="aBcDeF"; char *b="AbCdEf"; if(!strncasecmp(a,b)) printf("%s =%s/n",a,b); }
|
执行
| aBcDef=AbCdEf
|
|
| strncat(连接两字符串) |
相关函数
| bcopy,memccpy,memecpy,strcpy,strncpy
|
表头文件
| #inclue <string.h>
|
定义函数
| char * strncat(char *dest,const char *src,size_t n);
|
函数说明
| strncat()会将参数src字符串拷贝n个字符到参数dest所指的字符串尾。第一个参数dest要有足够的空间来容纳要拷贝的字符串。
|
返回值
| 返回参数dest的字符串起始地址。
|
范例
| #include <string.h> main() { char a[30]="string(1)"; char b[]="string(2)"; printf("before strnact() :%s/n", a); printf("after strncat() :%s/n", strncat(a,b,6)); }
|
执行
| before strnact() : string(1) after strncat() : string(1) string
|
|
| strncpy(拷贝字符串) |
相关函数
| bcopy,memccpy,memcpy,memmove
|
表头文件
| #include<string.h>
|
定义函数
| char * strncpy(char *dest,const char *src,size_t n);
|
函数说明
| strncpy()会将参数src字符串拷贝前n个字符至参数dest所指的地址。
|
返回值
| 返回参数dest的字符串起始地址。
|
范例
| #inclue <string.h> main() { char a[30]="string(1)"; char b[]="string(2)"; printf("before strncpy() : %s/n",a); printf("after strncpy() : %s/n",strncpy(a,b,6)); }
|
执行
| before strncpy() : string(1) after strncpy() : string(1)
|
|
| strpbrk(查找字符串中第一个出现的指定字符) |
相关函数
| index,memchr,rindex,strpbrk,strsep,strspn,strstr,strtok
|
表头文件
| #include <include.h>
|
定义函数
| char *strpbrk(const char *s,const char *accept);
|
函数说明
| strpbrk()用来找出参数s 字符串中最先出现存在参数accept 字符串中的任意字符。
|
返回值
| 如果找到指定的字符则返回该字符所在地址,否则返回0。
|
范例
| #include <string.h> main() { char *s="0123456789012345678901234567890"; char *p; p=strpbrk(s,"a1 839"); /*1会最先在s字符串中找到*/ printf("%s/n",p); p=strprk(s,"4398");/*3 会最先在s 字符串中找到*/ printf("%s/n",p);
|
执行
| 1.23E+29
|
|
| strrchr(查找字符串中最后出现的指定字符) |
相关函数
| index,memchr,rindex,strpbrk,strsep,strspn,strstr,strtok
|
表头文件
| #include<string.h>
|
定义函数
| char * strrchr(const char *s, int c);
|
函数说明
| strrchr()用来找出参数s字符串中最后一个出现的参数c地址,然后将该字符出现的地址返回。
|
返回值
| 如果找到指定的字符则返回该字符所在地址,否则返回0。
|
范例
| #include<string.h> main() { char *s="0123456789012345678901234567890"; char *p; p=strrchr(s,'5'); printf("%s/n",p); }
|
执行
| 567890
|
|
| strspn(返回字符串中连续不含指定字符串内容的字符数) |
相关函数
| strcspn,strchr,strpbrk,strsep,strstr
|
表头文件
| #include<string.h>
|
定义函数
| size_t strspn (const char *s,const char * accept);
|
函数说明
| strspn()从参数s 字符串的开头计算连续的字符,而这些字符都完全是accept 所指字符串中的字符。简单的说,若strspn()返回的数值为n,则代表字符串s 开头连续有n 个字符都是属于字符串accept内的字符。
|
返回值
| 返回字符串s开头连续包含字符串accept内的字符数目。
|
范例
| #include<string.h> main() { char *str="Linux was first developed for 386/486-based PCs."; char *t1="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ"; printf("%d/n",strspn(str,t1)); }
|
执行
| 5 /*计算大小写字母。不包含“ ”,所以返回Linux的长度。*/
|
|
| strstr(在一字符串中查找指定的字符串) |
相关函数
| index,memchr,rindex,strchr,strpbrk,strsep,strspn,strtok
|
表头文件
| #include<string.h>
|
定义函数
| char *strstr(const char *haystack,const char *needle);
|
函数说明
| strstr()会从字符串haystack 中搜寻字符串needle,并将第一次出现的地址返回。
|
返回值
| 返回指定字符串第一次出现的地址,否则返回0。
|
范例
| #include<string.h> main() { char * s="012345678901234567890123456789"; char *p; p= strstr(s,"901"); printf("%s/n",p); }
|
执行
| 9.01E+21
|
|
| strtok(分割字符串) |
相关函数
| index,memchr,rindex,strpbrk,strsep,strspn,strstr
|
表头文件
| #include<string.h>
|
定义函数
| char * strtok(char *s,const char *delim);
|
函数说明
| strtok()用来将字符串分割成一个个片段。参数s指向欲分割的字符串,参数delim则为分割字符串,当strtok()在参数s的字符串中发现到参数delim的分割字符时则会将该字符改为/0 字符。在第一次调用时,strtok()必需给予参数s字符串,往后的调用则将参数s设置成NULL。每次调用成功则返回下一个分割后的字符串指针。
|
返回值
| 返回下一个分割后的字符串指针,如果已无从分割则返回NULL。
|
范例
| #include<string.h> main() { char s[]="ab-cd : ef;gh :i-jkl;mnop;qrs-tu: vwx-y;z"; char *delim="-: "; char *p; printf("%s ";strtok(s,delim)); while((p=strtok(NULL,delim)))printf("%s ",p); printf("/n"); }
|
执行
| ab cd ef;gh i jkl;mnop;qrs tu vwx y;z /*-与:字符已经被/0 字符取代*/
|