转载地址： http://blog.csdn.net/smilestone_322/article/details/18923711
本文主要讲解live555的服务端RTP打包流程,根据MediaServer讲解RTP的打包流程，所以大家看这篇文章时，先看看下面这个链接的内容;
庖丁解牛-----Live555源码彻底解密(根据MediaServer讲解Rtsp的建立过程)
http://blog.csdn.net/smilestone_322/article/details/18923139
在收到客户端的Play命令后，调用StartStream函数启动流
void OnDemandServerMediaSubsession::startStream(unsigned clientSessionId,
void* streamToken,
TaskFunc* rtcpRRHandler,
void* rtcpRRHandlerClientData,
unsignedshort& rtpSeqNum,
unsigned& rtpTimestamp,
ServerRequestAlternativeByteHandler* serverRequestAlternativeByteHandler,
void* serverRequestAlternativeByteHandlerClientData) {
StreamState* streamState = (StreamState*)streamToken;
Destinations* destinations
= (Destinations*)(fDestinationsHashTable->Lookup((charconst*)clientSessionId));
if (streamState != NULL) {
//启动流
streamState->startPlaying(destinations,
rtcpRRHandler, rtcpRRHandlerClientData,
serverRequestAlternativeByteHandler, serverRequestAlternativeByteHandlerClientData);
RTPSink* rtpSink = streamState->rtpSink(); // alias
if (rtpSink != NULL) {
//获取序列号与时间戳
rtpSeqNum = rtpSink->currentSeqNo();
rtpTimestamp = rtpSink->presetNextTimestamp();
}
}
}
接着跟踪streamState类中的startPlaying函数;源码如下：
void StreamState
::startPlaying(Destinations* dests,
TaskFunc* rtcpRRHandler, void* rtcpRRHandlerClientData,
ServerRequestAlternativeByteHandler* serverRequestAlternativeByteHandler,
void* serverRequestAlternativeByteHandlerClientData) {
if (dests == NULL) return;
if (fRTCPInstance == NULL && fRTPSink != NULL) {
// Create (and start) a 'RTCP instance' for this RTP sink:
//用来发送RTCP数据包
fRTCPInstance
= RTCPInstance::createNew(fRTPSink->envir(), fRTCPgs,
fTotalBW, (unsignedchar*)fMaster.fCNAME,
fRTPSink, NULL /* we're a server */);
// Note: This starts RTCP running automatically
}
if (dests->isTCP) {
// Change RTP and RTCP to use the TCP socket instead of UDP:
//使用TCP Socket代替UDP socket，使用什么socket由客户端确定，客户端在Setup时，将socket的连接方式告诉服务端；
if (fRTPSink != NULL) {
fRTPSink->addStreamSocket(dests->tcpSocketNum, dests->rtpChannelId);
RTPInterface
::setServerRequestAlternativeByteHandler(fRTPSink->envir(), dests->tcpSocketNum,
serverRequestAlternativeByteHandler, serverRequestAlternativeByteHandlerClientData);
// So that we continue to handle RTSP commands from the client
}
if (fRTCPInstance != NULL) {
fRTCPInstance->addStreamSocket(dests->tcpSocketNum, dests->rtcpChannelId);
fRTCPInstance->setSpecificRRHandler(dests->tcpSocketNum, dests->rtcpChannelId,
rtcpRRHandler, rtcpRRHandlerClientData);
}
} else {
// Tell the RTP and RTCP 'groupsocks' about this destination
// (in case they don't already have it):
if (fRTPgs != NULL) fRTPgs->addDestination(dests->addr, dests->rtpPort);
if (fRTCPgs != NULL) fRTCPgs->addDestination(dests->addr, dests->rtcpPort);
if (fRTCPInstance != NULL) {
fRTCPInstance->setSpecificRRHandler(dests->addr.s_addr, dests->rtcpPort,
rtcpRRHandler, rtcpRRHandlerClientData);
}
}
if (fRTCPInstance != NULL) {
// Hack: Send an initial RTCP "SR" packet, before the initial RTP packet, so that receivers will (likely) be able to
// get RTCP-synchronized presentation times immediately:
fRTCPInstance->sendReport();
}
if (!fAreCurrentlyPlaying && fMediaSource != NULL) {
if (fRTPSink != NULL) {
//启动流
fRTPSink->startPlaying(*fMediaSource, afterPlayingStreamState,this);
fAreCurrentlyPlaying = True;
} else if (fUDPSink != NULL) {
fUDPSink->startPlaying(*fMediaSource, afterPlayingStreamState,this);
fAreCurrentlyPlaying = True;
}
}
}
下面主要分析:
fRTPSink->startPlaying(*fMediaSource, afterPlayingStreamState, this);
代码;RTPSink* fRTPSink;RTPSink继承自MediaSink，所以fRTPSink调用的是MediaSink中的startPlaying函数;跟踪进入到startPlaying函数;
Boolean MediaSink::startPlaying(MediaSource& source,
afterPlayingFunc* afterFunc,
void* afterClientData) {
// Make sure we're not already being played:
if (fSource != NULL) {
envir().setResultMsg("This sink is already being played");
return False;
}
// Make sure our source is compatible:
if (!sourceIsCompatibleWithUs(source)) {
envir().setResultMsg("MediaSink::startPlaying(): source is not compatible!");
return False;
}
//保存下一些变量
fSource = (FramedSource*)&source;
fAfterFunc = afterFunc;
fAfterClientData = afterClientData;
return continuePlaying();
}
这个函数的内容对于客户端和服务端来说，都差不多，就是Sink跟source要数据，对服务器来说，source就是读文件或读实时流，将数据数据传递到sink，sink负责打包发送，对于客户端来说，source就是从网络上接收数据包，组成帧，而sink就是数据的解码等内容;下面接着跟进到continuePlaying()；
virtual Boolean continuePlaying() = 0;函数在MediaSink类中定义的是一个纯虚函数，实现就是在它的子类里面实现了。跟进代码，看在哪个子类中实现该函数；
Boolean MultiFramedRTPSink::continuePlaying() {
// Send the first packet.
// (This will also schedule any future sends.)
buildAndSendPacket(True);
return True;
}
在MultiFrameRTPSink中找到continuePlaying()函数，该函数很简单，就是调用buildAndSendPacket(True);函数；MultiFrameRTPSink是一个与帧有关的类，它每次从source中获得一帧数据，buildAndSendPacket函数，顾名思义就是打包和发送的函数了。
void MultiFramedRTPSink::buildAndSendPacket(Boolean isFirstPacket) {
fIsFirstPacket = isFirstPacket;
// Set up the RTP header:
//填充RTP包头
unsigned rtpHdr = 0x80000000; // RTP version 2; marker ('M') bit not set (by default; it can be set later)
rtpHdr |= (fRTPPayloadType<<16); //负载类型
rtpHdr |= fSeqNo; // sequence number //序列号
//往包buff中加入rtpHdr
fOutBuf->enqueueWord(rtpHdr);
// Note where the RTP timestamp will go.
// (We can't fill this in until we start packing payload frames.)
fTimestampPosition = fOutBuf->curPacketSize();
//缓冲区中空出一个时间戳的位置，时间戳在以后在填充
fOutBuf->skipBytes(4); // leave a hole for the timestamp
//缓冲区中填入SSRC内容;
fOutBuf->enqueueWord(SSRC());
// Allow for a special, payload-format-specific header following the
// RTP header:
fSpecialHeaderPosition = fOutBuf->curPacketSize();
fSpecialHeaderSize = specialHeaderSize();
fOutBuf->skipBytes(fSpecialHeaderSize);
// Begin packing as many (complete) frames into the packet as we can:
fTotalFrameSpecificHeaderSizes = 0;
fNoFramesLeft = False;
fNumFramesUsedSoFar = 0;
//前面的内容都是填充RTP包头,packFrame就是打包数据了
packFrame();
}
PackFrame函数源码如下:
void MultiFramedRTPSink::packFrame() {
// Get the next frame.
// First, see if we have an overflow frame that was too big for the last pkt
if (fOutBuf->haveOverflowData()) {
//上一帧的数据太大，溢出了
// Use this frame before reading a new one from the source
unsigned frameSize = fOutBuf->overflowDataSize();
struct timeval presentationTime = fOutBuf->overflowPresentationTime();
unsigned durationInMicroseconds = fOutBuf->overflowDurationInMicroseconds();
fOutBuf->useOverflowData();
afterGettingFrame1(frameSize, 0, presentationTime, durationInMicroseconds);
} else {
// Normal case: we need to read a new frame from the source
if (fSource == NULL) return;
//更新缓冲区的位置信息
fCurFrameSpecificHeaderPosition = fOutBuf->curPacketSize();
fCurFrameSpecificHeaderSize = frameSpecificHeaderSize();
fOutBuf->skipBytes(fCurFrameSpecificHeaderSize);
fTotalFrameSpecificHeaderSizes += fCurFrameSpecificHeaderSize;
//再次从source要数据, fOutBuf->curPtr()表示数据存放的起始Buff地址;第2个参数表示Buff可用缓冲区的size，afterGettingFrame为收到一帧数据的回调函数，对该帧数据进行处理；ourHandleClosure在关闭文件时调用该函数；
fSource->getNextFrame(fOutBuf->curPtr(), fOutBuf->totalBytesAvailable(),
afterGettingFrame, this, ourHandleClosure,this);
}
}
GetNextFrame函数就是Source读文件或某个设备(比如IP Camera)中读取一帧数据，读完后返回给Sink，然后调用afterGettingFrame函数；
下面接着讲解getNextFrame函数；
void FramedSource::getNextFrame(unsignedchar* to,unsigned maxSize,
afterGettingFunc* afterGettingFunc,
void* afterGettingClientData,
onCloseFunc* onCloseFunc,
void* onCloseClientData) {
// Make sure we're not already being read:
if (fIsCurrentlyAwaitingData) {
envir() << "FramedSource[" <<this <<"]::getNextFrame(): attempting to read more than once at the same time!\n";
envir().internalError();
}
//保存一些变量
fTo = to;
fMaxSize = maxSize;
fNumTruncatedBytes = 0; // by default; could be changed by doGetNextFrame()
fDurationInMicroseconds = 0; // by default; could be changed by doGetNextFrame()
fAfterGettingFunc = afterGettingFunc;
fAfterGettingClientData = afterGettingClientData;
fOnCloseFunc = onCloseFunc;
fOnCloseClientData = onCloseClientData;
fIsCurrentlyAwaitingData = True;
doGetNextFrame();
}
调用doGetNextFrame()函数取下一帧数据;
H264FUAFragmenter类是H264VideoRTPSink的中调用，为H264VideoRTPSink的一个成员变量，H264VideoRTPSink继承自VideoRTPSink，而VideoRTPSink又继承自MultiFramedRTPSink；MultiFramedRTPSink继承自MediaSink；H264FUAFragmenter类取代了H264VideoStreamFramer成为和RTPSink的source，RTPSink要获取数据帧时，从H264FUAFragmenter获取。
void H264FUAFragmenter::doGetNextFrame() {
if (fNumValidDataBytes == 1) {
// We have no NAL unit data currently in the buffer. Read a new one:
//buff中没有数据,则调用fInputSource->getNextFrame函数从source中获取数据;
//fInputSource为H264VideoStreamFramer，H264VideoStreamFramer的getNextFrame()会调用H264VideoStreamParser的parser(),parser()又调用ByteStreamFileSource获取数据;
fInputSource->getNextFrame(&fInputBuffer[1], fInputBufferSize - 1,
afterGettingFrame, this,
FramedSource::handleClosure, this);
} else {
// We have NAL unit data in the buffer. There are three cases to consider:
// 1. There is a new NAL unit in the buffer, and it's small enough to deliver
// to the RTP sink (as is).
// 2. There is a new NAL unit in the buffer, but it's too large to deliver to
// the RTP sink in its entirety. Deliver the first fragment of this data,
// as a FU-A packet, with one extra preceding header byte.
// 3. There is a NAL unit in the buffer, and we've already delivered some
// fragment(s) of this. Deliver the next fragment of this data,
// as a FU-A packet, with two extra preceding header bytes.
if (fMaxSize < fMaxOutputPacketSize) {// shouldn't happen
envir() << "H264FUAFragmenter::doGetNextFrame(): fMaxSize ("
<< fMaxSize << ") is smaller than expected\n";
} else {
fMaxSize = fMaxOutputPacketSize;
}
fLastFragmentCompletedNALUnit = True; // by default
//1)非分片包
if (fCurDataOffset == 1) { // case 1 or 2
if (fNumValidDataBytes - 1 <= fMaxSize) {// case 1
memmove(fTo, &fInputBuffer[1], fNumValidDataBytes - 1);
fFrameSize = fNumValidDataBytes - 1;
fCurDataOffset = fNumValidDataBytes;
} else { // case 2
// We need to send the NAL unit data as FU-A packets. Deliver the first
// packet now. Note that we add FU indicator and FU header bytes to the front
// of the packet (reusing the existing NAL header byte for the FU header).
//2)为FU-A的第一个包
fInputBuffer[0] = (fInputBuffer[1] & 0xE0) | 28; // FU indicator
fInputBuffer[1] = 0x80 | (fInputBuffer[1] & 0x1F); // FU header (with S bit)
memmove(fTo, fInputBuffer, fMaxSize);
fFrameSize = fMaxSize;
fCurDataOffset += fMaxSize - 1;
fLastFragmentCompletedNALUnit = False;
}
} else { // case 3
// We are sending this NAL unit data as FU-A packets. We've already sent the
// first packet (fragment). Now, send the next fragment. Note that we add
// FU indicator and FU header bytes to the front. (We reuse these bytes that
// we already sent for the first fragment, but clear the S bit, and add the E
//3） bit if this is the last fragment.)
//为FU-A的中间的包，复用FU indicator and FU header,清除掉FU header (no S bit开始标记)
fInputBuffer[fCurDataOffset-2] = fInputBuffer[0]; // FU indicator
fInputBuffer[fCurDataOffset-1] = fInputBuffer[1]&~0x80; // FU header (no S bit)
unsigned numBytesToSend = 2 + fNumValidDataBytes - fCurDataOffset;
if (numBytesToSend > fMaxSize) {
// We can't send all of the remaining data this time:
numBytesToSend = fMaxSize;
fLastFragmentCompletedNALUnit = False;
} else {
// This is the last fragment:
//4）这是FU(分片包28)的最后一个包了，将FU头部的设置成E表示End，方便客户端组帧
fInputBuffer[fCurDataOffset-1] |= 0x40; // set the E bit in the FU header
fNumTruncatedBytes = fSaveNumTruncatedBytes;
}
memmove(fTo, &fInputBuffer[fCurDataOffset-2], numBytesToSend);
fFrameSize = numBytesToSend;
fCurDataOffset += numBytesToSend - 2;
}
if (fCurDataOffset >= fNumValidDataBytes) {
// We're done with this data. Reset the pointers for receiving new data:
fNumValidDataBytes = fCurDataOffset = 1;
}
// Complete delivery to the client:
FramedSource::afterGetting(this);
}
}
该函数的else部分实现RTP数据打包工作;live555只处理2种包;单独的包,比如sps,pps信息,一个包就是一个数据帧,2)包很大，拆包，采用FU-A的方法拆包，参考RTP打包协议！
http://blog.csdn.net/smilestone_322/article/details/7574253
//fInputSource->getNextFrame()后调用回调函数：
void H264FUAFragmenter::afterGettingFrame(void* clientData,unsigned frameSize,
unsigned numTruncatedBytes,
struct timeval presentationTime,
unsigned durationInMicroseconds) {
H264FUAFragmenter* fragmenter = (H264FUAFragmenter*)clientData;
fragmenter->afterGettingFrame1(frameSize, numTruncatedBytes, presentationTime,
durationInMicroseconds);
}
void H264FUAFragmenter::afterGettingFrame1(unsigned frameSize,
unsigned numTruncatedBytes,
struct timeval presentationTime,
unsigned durationInMicroseconds) {
fNumValidDataBytes += frameSize;
fSaveNumTruncatedBytes = numTruncatedBytes;
fPresentationTime = presentationTime;
fDurationInMicroseconds = durationInMicroseconds;
// Deliver data to the client:
doGetNextFrame();
}
doGetNextFrame();获取到一帧数据后，就打包将数据发送给客户端；调用H264FUAFragmenter的doGetNextFrame()函数，对数据进行分析处理;这时走的doGetNextFrame()的else部分；
afterGettingFrame函数的源码如下：
void MultiFramedRTPSink
::afterGettingFrame(void* clientData,unsigned numBytesRead,
unsigned numTruncatedBytes,
struct timeval presentationTime,
unsigned durationInMicroseconds) {
MultiFramedRTPSink* sink = (MultiFramedRTPSink*)clientData;
sink->afterGettingFrame1(numBytesRead, numTruncatedBytes,
presentationTime, durationInMicroseconds);
}
afterGettingFrame又调用afterGettingFrame1来消费数据，afterGettingFrame1我猜是发送数据；
看源码；
void MultiFramedRTPSink
::afterGettingFrame1(unsigned frameSize,unsigned numTruncatedBytes,
struct timeval presentationTime,
unsigned durationInMicroseconds) {
if (fIsFirstPacket) {
// Record the fact that we're starting to play now:
gettimeofday(&fNextSendTime, NULL);
}
fMostRecentPresentationTime = presentationTime;
if (fInitialPresentationTime.tv_sec == 0 && fInitialPresentationTime.tv_usec == 0) {
fInitialPresentationTime = presentationTime;
}
if (numTruncatedBytes > 0) {
unsigned const bufferSize = fOutBuf->totalBytesAvailable();
envir() << "MultiFramedRTPSink::afterGettingFrame1(): The input frame data was too large for our buffer size ("
<< bufferSize << "). "
<< numTruncatedBytes << " bytes of trailing data was dropped! Correct this by increasing \"OutPacketBuffer::maxSize\" to at least "
<< OutPacketBuffer::maxSize + numTruncatedBytes << ", *before* creating this 'RTPSink'. (Current value is "
<< OutPacketBuffer::maxSize << ".)\n";
}
unsigned curFragmentationOffset = fCurFragmentationOffset;
unsigned numFrameBytesToUse = frameSize;
unsigned overflowBytes = 0;
// If we have already packed one or more frames into this packet,
// check whether this new frame is eligible to be packed after them.
// (This is independent of whether the packet has enough room for this
// new frame; that check comes later.)
if (fNumFramesUsedSoFar > 0) {
if ((fPreviousFrameEndedFragmentation
&& !allowOtherFramesAfterLastFragment())
|| !frameCanAppearAfterPacketStart(fOutBuf->curPtr(), frameSize)) {
// Save away this frame for next time:
numFrameBytesToUse = 0;
fOutBuf->setOverflowData(fOutBuf->curPacketSize(), frameSize,
presentationTime, durationInMicroseconds);
}
}
fPreviousFrameEndedFragmentation = False;
//缓冲区太小了，数据帧被截断了，提示用户增加缓冲区大小
if (numFrameBytesToUse > 0) {
// Check whether this frame overflows the packet
if (fOutBuf->wouldOverflow(frameSize)) {
// Don't use this frame now; instead, save it as overflow data, and
// send it in the next packet instead. However, if the frame is too
// big to fit in a packet by itself, then we need to fragment it (and
// use some of it in this packet, if the payload format permits this.)
if (isTooBigForAPacket(frameSize)
&& (fNumFramesUsedSoFar == 0 || allowFragmentationAfterStart())) {
// We need to fragment this frame, and use some of it now:
overflowBytes = computeOverflowForNewFrame(frameSize);
numFrameBytesToUse -= overflowBytes;
fCurFragmentationOffset += numFrameBytesToUse;
} else {
// We don't use any of this frame now:
overflowBytes = frameSize;
numFrameBytesToUse = 0;
}
fOutBuf->setOverflowData(fOutBuf->curPacketSize() + numFrameBytesToUse,
overflowBytes, presentationTime, durationInMicroseconds);
} else if (fCurFragmentationOffset > 0) {
// This is the last fragment of a frame that was fragmented over
// more than one packet. Do any special handling for this case:
fCurFragmentationOffset = 0;
fPreviousFrameEndedFragmentation = True;
}
}
if (numFrameBytesToUse == 0 && frameSize > 0) {
// Send our packet now, because we have filled it up:
//发送数据包
sendPacketIfNecessary();
} else {
// Use this frame in our outgoing packet:
unsigned char* frameStart = fOutBuf->curPtr();
fOutBuf->increment(numFrameBytesToUse);
// do this now, in case "doSpecialFrameHandling()" calls "setFramePadding()" to append padding bytes
// Here's where any payload format specific processing gets done:
doSpecialFrameHandling(curFragmentationOffset, frameStart,
numFrameBytesToUse, presentationTime,
overflowBytes);
++fNumFramesUsedSoFar;
// Update the time at which the next packet should be sent, based
// on the duration of the frame that we just packed into it.
// However, if this frame has overflow data remaining, then don't
// count its duration yet.
//更新时间戳
if (overflowBytes == 0) {
fNextSendTime.tv_usec += durationInMicroseconds;
fNextSendTime.tv_sec += fNextSendTime.tv_usec/1000000;
fNextSendTime.tv_usec %= 1000000;
}
// Send our packet now if (i) it's already at our preferred size, or
// (ii) (heuristic) another frame of the same size as the one we just
// read would overflow the packet, or
// (iii) it contains the last fragment of a fragmented frame, and we
// don't allow anything else to follow this or
// (iv) one frame per packet is allowed:
//1)数据包的size已经是一个恰当的大小了，在往里面打包数据可能造成缓冲区溢出了;
//2)已经包括了分片包的最后一个包了;
//3)容许一帧一个数据包
if (fOutBuf->isPreferredSize()
|| fOutBuf->wouldOverflow(numFrameBytesToUse)
|| (fPreviousFrameEndedFragmentation &&
!allowOtherFramesAfterLastFragment())
|| !frameCanAppearAfterPacketStart(fOutBuf->curPtr() - frameSize,
frameSize) ) {
// The packet is ready to be sent now
//发送数据包
sendPacketIfNecessary();
} else {
// There's room for more frames; try getting another:
//继承打包
packFrame();
}
}
}
下面继续看发送数据的函数：
void MultiFramedRTPSink::sendPacketIfNecessary() {
if (fNumFramesUsedSoFar > 0) {
// Send the packet:
#ifdef TEST_LOSS
if ((our_random()%10) != 0) // simulate 10% packet loss #####
#endif
if (!fRTPInterface.sendPacket(fOutBuf->packet(), fOutBuf->curPacketSize())) {
// if failure handler has been specified, call it
if (fOnSendErrorFunc != NULL) (*fOnSendErrorFunc)(fOnSendErrorData);
}
++fPacketCount;
fTotalOctetCount += fOutBuf->curPacketSize();
fOctetCount += fOutBuf->curPacketSize()
- rtpHeaderSize - fSpecialHeaderSize - fTotalFrameSpecificHeaderSizes;
++fSeqNo; // for next time
}
if (fOutBuf->haveOverflowData()
&& fOutBuf->totalBytesAvailable() > fOutBuf->totalBufferSize()/2) {
// Efficiency hack: Reset the packet start pointer to just in front of
// the overflow data (allowing for the RTP header and special headers),
// so that we probably don't have to "memmove()" the overflow data
// into place when building the next packet:
unsigned newPacketStart = fOutBuf->curPacketSize()
- (rtpHeaderSize + fSpecialHeaderSize + frameSpecificHeaderSize());
fOutBuf->adjustPacketStart(newPacketStart);
} else {
// Normal case: Reset the packet start pointer back to the start:
fOutBuf->resetPacketStart();
}
fOutBuf->resetOffset();
fNumFramesUsedSoFar = 0;
if (fNoFramesLeft) {
// We're done:
onSourceClosure(this);
} else {
// We have more frames left to send. Figure out when the next frame
// is due to start playing, then make sure that we wait this long before
// sending the next packet.
struct timeval timeNow;
gettimeofday(&timeNow, NULL);
int secsDiff = fNextSendTime.tv_sec - timeNow.tv_sec;
int64_t uSecondsToGo = secsDiff*1000000 + (fNextSendTime.tv_usec - timeNow.tv_usec);
if (uSecondsToGo < 0 || secsDiff < 0) {// sanity check: Make sure that the time-to-delay is non-negative:
uSecondsToGo = 0;
}
// Delay this amount of time:
nextTask() = envir().taskScheduler().scheduleDelayedTask(uSecondsToGo, (TaskFunc*)sendNext,this);
}
}
在发送数据的函数中使用延迟任务，为了延迟包的发送，使用delay task来执行下次打包发送任务，看sendNext的代码;
void MultiFramedRTPSink::sendNext(void* firstArg) {
MultiFramedRTPSink* sink = (MultiFramedRTPSink*)firstArg;
sink->buildAndSendPacket(False);
}
它又调用了buildAndSendPacket函数，看下该函数参数的作用，True和False的区别;True表示该帧是第一帧，记下实际Play的时间；在afterGettingFrame1中有如下代码：
if (fIsFirstPacket) {
// Record the fact that we're starting to play now:
gettimeofday(&fNextSendTime, NULL);
}
在MultiFramedRTPSink中数据包和帧的缓冲区队列是同一个，使用了一些标记和对指针的移动来操作数据打包和发送数据帧；注意:如果数据帧溢出，时间戳会计算不准确;
1117
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
