hpux11.31 磁带备份报错-no space on the LIF volume

硬件环境：hp  superdome 9000 PA

系统环境：hpux 11.31

 

在此环境下，安装完成 oracle11.2.0.3后， 系统根盘做mirror，完成后，进行磁带备份。

备份过程中报错如下：

 

 

cqlsdb#[/tmp]make_tape_recovery -Av -a /dev/rmt/2mn
       * Creating local directories for configuration files and archive.

=======  12/21/12 18:07:42 EAT  Started make_tape_recovery. (Fri Dec 21 18:07:42 EAT 2012)
         @(#)Ignite-UX Revision C.7.13.240
         @(#)ignite/net_recovery (opt) Revision: /branches/IUX_RA1109/ignite/src@83765 Last Modified: 2011-06-14 10:28:20 +0530 (Tue, 14 Jun 2011)

       * Recovery Archive Description = Recovery Archive
        
       * Recovery Archive Location    = /dev/rmt/2mn
        
       * Number of Archives to Save   = 2
        
       * Pax type  = tar
        
       
        In?     dsk/vg  name                    minor#  Associated disks/mountpoints
        2       v       /dev/vg00               0x00    /dev/disk/disk84
                                                /dev/vg00/lvol1 /stand  2
                                                /dev/vg00/lvol2
                                                /dev/vg00/lvol3 /       2
                                                /dev/vg00/lvol4 /tmp    2
                                                /dev/vg00/lvol5 /home   2
                                                /dev/vg00/lvol6 /opt    2
                                                /dev/vg00/lvol7 /usr    2
                                                /dev/vg00/lvol8 /var    2
                                                /dev/vg00/oracle        /oracle 2

        ** 0 - The Volume Group or Filesystem is Not included in the
               System Recovery Archive
        ** 1 - The Volume Group or Filesystem is Partially included in the
               System Recovery Archive
        ** 2 - The Volume Group or Filesystem is Fully included in the
               System Recovery Archive

       * Checking Versions of Ignite-UX filesets
       * Scanning system for IO devices...
       * Boot device is: 0/0/9/0/1.0x9.0x0
       * Creating System Configuration.
       * /opt/ignite/bin/save_config -f /var/opt/ignite/recovery/2012-12-21,18:07/system_cfg vg00
       * Backing Up Volume Group /dev/vg00
       * /usr/sbin/vgcfgbackup /dev/vg00
       * Creating Map Files for Volume Group /dev/vg00
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

       * Creating Control Configuration.
       * Creating Archive File List
       * Creating Archive Configuration

       * /opt/ignite/lbin/make_arch_config -c /var/opt/ignite/recovery/2012-12-21,18:07/archive_cfg -g /var/opt/ignite/recovery/2012-12-21,18:07/flist -n 2012-12-21,18:07 -r pa -b 64 -d
         Recovery\ Archive -t 1 -i 1 -m t
       * Saving the information about archive to /var/opt/ignite/recovery/previews
       * Creating The Tape Archive
       * Checking configuration file for Syntax
make_medialif: ERROR: Cannot lifcp -r -K2 file "/opt/ignite/data/Rel_B.11.31/SYSCMDSIA" to "/var/tmp/uxinstlf.recovery:SYSCMDSIA":
        lifcp: Cannot create SYSCMDSIA ; no space on the LIF volume
ERROR:   System Error, /opt/ignite/bin/make_medialif failed creating boot LIF file.
ERROR:   Failed to generate LIF on tape.

 

 

解决办法：

In /opt/ignite/bin/make_medialif

change LIFVolSize='500000000' to LIFVolSize='750000000'.

there is obviously not enough space in the defined LIF area to hold all the files.

 

 

注：hp superdome  9000 IA   + hpux 11.31  备份不会出现上述问题，  不需要更改。