Linux显示系统的诊断信息

Linux显示系统的诊断信息

youhaidong@youhaidong-ThinkPad-Edge-E545:~$ dmesg

[    1.492480] EDD information not available.
[    1.492521] PM: Hibernation image not present or could not be loaded.
[    1.506437] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.818678] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.818687] ACPI: Battery Slot [BAT0] (battery present)
[    1.820081] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    1.820084] Write protecting the kernel read-only data: 12288k
[    1.823447] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[    1.826206] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[    1.841452] systemd-udevd[116]: starting version 204
[    1.875918] rtsx_pci 0000:04:00.0: irq 50 for MSI/MSI-X
[    1.876003] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 50
[    1.876581] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.876595] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.876893] r8169 0000:02:00.0: irq 51 for MSI/MSI-X
[    1.877097] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000477a000, f8:a9:63:55:b2:d5, XID 0c900800 IRQ 51
[    1.877101] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.879040] ahci 0000:00:11.0: version 3.0
[    1.879463] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
[    1.879608] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.879612] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.880173] scsi0 : ahci
[    1.880284] scsi1 : ahci
[    1.880348] ata1: SATA max UDMA/133 abar m2048@0xf044e000 port 0xf044e100 irq 52
[    1.880352] ata2: SATA max UDMA/133 abar m2048@0xf044e000 port 0xf044e180 irq 52
[    1.890404] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    2.084625] usb 2-2: New USB device found, idVendor=04f2, idProduct=b44d
[    2.084629] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.084631] usb 2-2: Product: Integrated Camera
[    2.084633] usb 2-2: Manufacturer: SunplusIT INC.
[    2.194112] tsc: Refined TSC clocksource calibration: 2495.338 MHz
[    2.370053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.370086] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.371062] ata1.00: ATA-9: WDC WD5000LPVX-08V0TT5, 05.01A05, max UDMA/133
[    2.371064] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.371742] ata1.00: configured for UDMA/133
[    2.371967] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-0 05.0 PQ: 0 ANSI: 5
[    2.372120] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.372124] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.372184] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.372234] sd 0:0:0:0: [sda] Write Protect is off
[    2.372237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.372283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.373915] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8E1, 8.00, max UDMA/100
[    2.376285] ata2.00: configured for UDMA/100
[    2.386495] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8E1    8.00 PQ: 0 ANSI: 5
[    2.395730] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.395735] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.395918] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.396009] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.418125] usb 4-1: new full-speed USB device number 2 using ohci-pci
[    2.527962]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[    2.528852] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.596949] usb 4-1: New USB device found, idVendor=105b, idProduct=e065
[    2.596954] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.596956] usb 4-1: Product: BCM43142A0
[    2.596957] usb 4-1: Manufacturer: Broadcom Corp
[    2.596959] usb 4-1: SerialNumber: 142D27F701FE
[    2.733932] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x126c00, board id: 2274, fw id: 1214803
[    2.733942] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.803003] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.837656] usb 7-1: new low-speed USB device number 2 using xhci_hcd
[    2.883914] usb 7-1: New USB device found, idVendor=17ef, idProduct=6050
[    2.883918] usb 7-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.883920] usb 7-1: Product: Lenovo Precision USB Mouse
[    2.884154] usb 7-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.888828] hidraw: raw HID events driver (C) Jiri Kosina
[    2.906806] usbcore: registered new interface driver usbhid
[    2.906810] usbhid: USB HID core driver
[    2.908670] input: Lenovo Precision USB Mouse as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.0/input/input7
[    2.908873] hid-generic 0003:17EF:6050.0001: input,hidraw0: USB HID v1.11 Mouse [Lenovo Precision USB Mouse] on usb-0000:00:10.1-1/input0
[    3.193482] Switched to clocksource tsc
[    3.861594] random: nonblocking pool is initialized
[    5.285665] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    6.487694] init: plymouth-upstart-bridge main process (177) terminated with status 1
[    6.487710] init: plymouth-upstart-bridge main process ended, respawning
[    6.490374] init: plymouth-upstart-bridge main process (191) terminated with status 1
[    6.490389] init: plymouth-ups