Citrix XenApp 6.5 Administration 1Y0-A20

Exam A
QUESTION 1
Scenario: A XenApp administrator must recommend a database option for the new XenApp 6.5 data store. The new farm will have more than 100 XenApp servers and 500 published resources, support more than 5,000 concurrent users and have two zones separated by a WAN connection.
Which two database options should be administrator recommend? (Choose two.)
A. IBM DB2 9.7 B. Oracle Enterprise 1.1 C. Microsoft SQL Server 2008 D. Microsoft SQL Server Express 2008
Answer: BC
Section: (none)
Explanation/Reference:
SQL Express is a free version that only supports small environments. Obviously 100 xenapp servers, 500 published applications, 5,000 concurrent users is a large environment.
QUESTION 2
Scenario: The administrator of a small XenApp server farm has configured end-to-end encryption between the XenApp servers and user devices by setting up Access Gateway VPX. Session Reliability is enabled in the farm with default settings.
Over which port will published applications be delivered?
A. 80 B. 443 C. 1494 D. 2598
Answer: B
Section: (none)
Explanation/Reference:
I think the answer should be 443 because of the CAG vpx is set up and then all traffic is ported to 443. Also the 2598 traffic is directed to 443.
http://support.citrix.com/servlet/KbServlet/download/2389-102-654859/CitrixPorts_by_Port_1103.pdf
Next article is for CAG8 but the trafficflow is still the same.
http://support.citrix.com/article/CTX113250
QUESTION 3
Scenario: The administrator of a XenApp Enterprise Edition server farm is configuration Single Sign-on for the users of the farm. The Citrix license server was installed with the default vendor daemon and console Web port numbers, but NOT the default license server port number.
Of the port numbers that are in use in the XenApp server farm, which one should the administrator specify for the license server during Single Sign-on configuration?
A. 443 B. 7279 C. 8082 D. 27009
Answer: D
Section: (none)
Explanation/Reference:
v4 - updated
This is a trick question.
By default the daemon and console use ports 7279, and 8082, so answers B and C are incorrect, because you can't have 2 things using the same port
By default the license server uses 27000, and as you can see below, by default SSO uses 27000, but the question says 27000 was NOT used. Since 443 requires certificates and the question doesn't mention that, the only possible port left is 27009
License server port number is 27000
Vendor daemon port number is 7279
Console Web port is 8082
http://support.citrix.com/article/CTX125774
http://support.citrix.com/proddocs/topic/licensing-119/lic-install.html
QUESTION 4
In building out a new XenApp environment, an administrator places the Secure Gateway and Web Interface in the DMZ. What must the administrator do to secure the traffic to the XML Broker?
A. Change the XML traffic port to a non-standard assignment. B. Use the SSL Relay tool to encrypt traffic to the XML Broker in the farm. C. Place the XML Broker in the DMZ and encrypt the traffic between them. D. Use encrypted ICA to communicate between the XML Broker and the Web Interface.
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 5
An administrator needs to install a XenApp 6.5 server to act as an additional dedicated data collector. After installing XenApp on the new server, the next step is to configure it by enabling the __________.
A. Session-host mode only B. Controller and Session-host modes C. data collector and XML Broker host mode D. data collector and XTE Service host mode
Answer: B
Section: (none)
Explanation/Reference:
Only during setup you can set the setup type: select session-host only (doesnt act as a data collector) or controller and session-host. Option C&D are invalid.
QUESTION 6
Scenario: An administrator manages a XenApp farm that uses Citrix Provisioning Services to automate the addition of XenApp servers to the farm. The administrator must implement a solution to automate the addition of new servers to the published resources, load evaluators, Citrix polices and load balancing policies.
Which two should the administrator configure to meet the requirements of the scenario?
(Choose two.)
A. Zones B. Policies C. Worker group D. Load evaluators
Answer: BC
Section: (none)
Explanation/Reference:
A worker group is a list of xenapp servers. Rather than manually adding new servers to a published application, for example, you could simply use a worker group and when you add a new xenapp server to a worker group, it's automatically added to any published applications that use that group.
QUESTION 7
Which Citrix service should an administrator monitor when troubleshooting issues with Session Reliability?
A. IMA B. XML C. XTE D. MFCom
Answer: C
Section: (none)
Explanation/Reference:
Session Reliability is performed by the XTE service
http://support.citrix.com/article/CTX104147
QUESTION 8
Scenario: An administrator has finished installing the first server in a new farm and is now creating the data store. The farm will consist of five servers and needs to support about 50 users. The company wants this installation to be as cost-effective as possible.
What is the best option for a database system that would support this farm effectively?
A. Microsoft Access B. Microsoft SQL Server C. Oracle Database System D. Microsoft SQL Server Express
Answer: D
Section: (none)
Explanation/Reference:
50 users is a small environment, therefore SQL Express would be the best choice. Notice the question asks "most cost-effective" - SQL Express is FREE
http://support.citrix.com/proddocs/topic/xenapp65-planning/ps-planning-datastore-intro-v2.html
Microsoft SQL Server and Oracle are suitable for any size environment and are recommended for all large and enterprise environments. When deploying large farms across a WAN, you can obtain a performance advantage by replicating the data store and distributing the load over multiple database servers. SQL Server and Oracle are suitable for large farms and support replication.
Do not install XenApp on the SQL Server or Oracle database server.
SQL Server Express is suitable for all small and many medium environments located in one physical location, which do not have branch offices across a WAN.
QUESTION 9
In order for an administrator to download a license from the company's mycitrix.com portal, the administrator must be added _________.
A. as a Citrix Administrator in the AppCenter B. into the contacts for the company in mycitrix.com C. to the Purchasing Active Directory group in the company D. as a Domain Administrator in the company's Active Directory
Answer: B
Section: (none)
Explanation/Reference:
http://support.citrix.com/article/CTX130126
You must be logged on to MyCitrix with a user name and password associated to an Administrator of the account where you need to make the restricted toolboxes available to other contacts.
When allowing contacts to access unrestricted toolboxes, all contacts within the account are able to view or use the toolboxes. The system does not allow an administrator to select only certain contacts to view these toolboxes. The access is available to all or to none. If you need to allow only certain contacts access and do not want to provide all contacts access, Citrix recommends that you add such contacts to the Administrators group.
QUESTION 10
Scenario: A farm contains six servers with one shared data collector that has a custom load balancing policy to limit the number of connections. An administrator needs to add more users to the farm, which will result in adding on four more servers for a total of 10. As most users in the farm use a CAD application, the administrator understands that resource needs will increase.
Which step should the administrator take to maintain farm integrity?
A. Dedicate two new servers as data collectors and set them as Most Preferred in the election. B. Dedicated one new server as the dedicated data collector and the current data collector as its backup. C. Dedicate three new servers as shared data collectors and assign Most Preferred in the election panel. D. Dedicate a new server as a second shared data collector and assign Most Preferred in the election panel.
Answer: B
Section: (none)
Explanation/Reference:
The resources a data collector uses increase based on users and servers. Since more users and servers are being added to the farm, a dedicated server should be used just as a data collector.
http://support.citrix.com/proddocs/topic/xenapp65-planning/ps-planning-data-collectors-planning-v2.html
When planning for data collectors, consider:
If you need a dedicated data collector
If you do not need a dedicated data collector, which infrastructure services can share the same server
If you need a zone in each geographic region, which means that you need data collectors for
those regions as well
To maintain consistent information between zones, data collectors relay information to all other data collectors in a farm, creating network traffic.
In general, data collector memory consumption increases as farm size increases. However, it is not significant. For example, the Independent Management Architecture service running on the data collector typically uses 300 MB on a 1000 server farm.
Likewise, CPU usage is not significant. A data collector hosted on a dual-processor server can support over 1000 servers in its zone. In general, CPU usage increases as the number of servers in a zone increases, the number of zones increases, and the number of users launching applications increases.
On most networks, Citrix recommends reducing the number of data collectors and zones. For example, if you have a farm with 100 servers in one location, Citrix recommends having one zone with a dedicated data collector (although you can have backup data collectors).
Citrix recommends installing XenApp on the server you want to host the data collector functionality and, after installing other member servers, configuring a server as the backup data collector.
QUESTION 11
Scenario: An administrator is creating a new XenApp farm. The farm will use hosted applications and applications streamed using Microsoft App-V technology. Both Microsoft Windows and Apple OS X computers are in use in the environment. Management requires an automated process to deliver all necessary clients and plug-ins.
Which two components should the administrator use to automate the process of delivering and updating client plug-in? (Choose two.)
A. Microsoft Group Policy B. Citrix Receiver Updater C. Citrix Merchandising Server D. Apple Enterprise Management Software
Answer: BC
Section: (none)
Explanation/Reference:
Group policy cannot be used for Apple computers, so option A is invalid
Citrix Receiver for Windows, Receiver for Mac, and Merchandising Server are components of the Citrix Delivery Center solution. While Citrix Delivery Center provides the application delivery infrastructure to the IT administrator, Citrix Merchandising Server and Citrix Receiver for Windows work together to streamline the installation and management of application delivery to the user desktops. Merchandising Server provides the administrative interface for configuring, delivering, and upgrading plug-ins for your users' computers.
QUESTION 12
Scenario: A Citrix administrator manages a XenApp farm with 3,000 users. The users run the same set of applications every day. Users complain that Application B takes a long time to launch
after they exit Application A. The administrator is required to implement a solution to speed up application launch.
What should the administrator do in order to ensure that users are able to launch Application B quickly after they exit Application A?
A. Configure Session Linger B. Set Linger Disconnect Time Interval to 0 C. Set Pre-launch Terminate Time Interval to 0 D. Create a Pre-launch session for Application B
Answer: A
Section: (none)
Explanation/Reference:
This question is verifying you know the difference between session linger and pre-launch
pre-launch loads the ICA session when the user logs into the Citrix Receiver, not when they launch an application. However, when the application is closed the session is closed as well. If the application is reopened there is a delay, which is what this question says is happening.
Session linger keeps the session open when an application is closed. If the application is reopened, or if another application is opened, it is much quicker.
A good demonstration of the differences is at http://vimeo.com/33426922
QUESTION 13
Scenario: Users working from a remote branch office using XenApp are reporting that Flash content is NOT displayed on an internal web page. Branch office users have NO direct connection to the internet. Other Intranet sites are unaffected.
Which two steps could the administrator take to resolve the issue without impacting Flash performance? (Choose two.)
A. Upgrading the Receiver client on the users PC to version 13. B. Create a XenApp policy to enable Flash redirection for remote users. C. Downgrade the version of Internet Explorer on the XenApp server to version 7. D. Enable server-server content fetching policy on the client device using the supplied ADM file. E. Add the URL of the intranet site to a Flash server-side content fetching URL list policy setting. F. Uninstall the Flash player on the XenApp server, and install the 10.1 Flash player or later on the client.
Answer: DE
Section: (none)
Explanation/Reference:
The second generation of Flash Redirection can be configured to be backward compatible with its legacy features, supporting user devices with earlier versions of the online plug-in (now the Citrix Receiver). Those devices can access the legacy Flash Redirection features only. This is done by providing two separate virtual channels, one for each generation of Flash Redirection, on the servers and user devices
To use the backward compatibility feature:
On the server running Desktop Studio or AppCenter, enable the Citrix User Policy setting Flash backwards compatibility. On the user device, enable the Enable HDX MediaStream for Flash on the user device setting, selecting the Always or Ask options.
To identify Web sites for server-side content fetching:
Flash Redirection downloads Flash content to the user device where it is played. The Flash server-side content fetching URL list setting allows you to specify Web sites whose Flash content can be downloaded to the server then sent to the user device. While server-side content fetching works with most Internet sites, it is intended for use with Intranet sites and internal Flash applications.
http://support.citrix.com/proddocs/topic/xendesktop-als/hd-flash-configure-server-ad.html
QUESTION 14
Scenario: An administrator needs to prepare a group of XenApp 6.5 servers for a scheduled maintenance window. The servers need to accept connections from users that already have existing sessions but disallow any new connections. The administrator also needs to ensure that the servers remain in maintenance mode after the software updates are performed, which require multiple restarts.
Which setting can the administrator use from the AppCenter?
A. Prohibit logons only B. Drain until next restart C. Allow logons and reconnections D. Prohibit logons until server restart E. Prohibit logons and reconnections
Answer: A
Section: (none)
Explanation/Reference:
v4 changed answer to A
Citrix recommends that you drain the server slowly by denying new logons (rerouting them to other servers), but allowing users to reconnect to disconnected sessions and close applications cleanly, thus preventing loss of user data.
http://support.citrix.com/proddocs/topic/xenapp65-admin/ps-sf-logons-control-v2.html
QUESTION 15
Users of a medical application are complaining of poor quality images when viewing X-ray scans. The administrator should create a XenApp policy to _________.
A. enable image caching B. set the Lossy Compression Level to None C. set the Progressive Compression level to low D. set the Heavyweight Compression level to Disabled
Answer: B
Section: (none)
Explanation/Reference:
http://support.citrix.com/proddocs/topic/xenapp5fp-w2k8/ps-console-policies-rules-speedscreen.html
Compression Level
This setting controls the normal lossy compression level used over client connections that are limited in bandwidth. In such cases, displaying images without compression can be slow. The Compression level setting defines the degree of lossy compression used on images. For improved responsiveness with bandwidth-intensive images, use high compression. Where preserving image data is vital; for example, when displaying X-ray images where no loss of quality is acceptable, you may not want to use lossy compression.
QUESTION 16
Scenario: A user opens a session to Server A to use a word processing application at 18:00. After 45 minutes of working with the word processing application, the user then launches an email client application, which opens a new session on Server B. Upon review of the environment, the administrator confirms that both applications are published with the same parameters for audio,
screen size, color resolution and encryption.
Which three possible reasons could have prevented Session Sharing from occurring? (Choose three.)
A. The email client application is NOT installed on Server A. B. The email client application is only published from Server B. C. The number of instance of the email client application that can be run is limited. D. Server A is reporting a full load, preventing the email client application from launching. E. Server A and Server B are in different vLAN; the vLAN of Server B has more capacity than the vLAN of Server A.
Answer: ABD
Section: (none)
Explanation/Reference:
This question tests your knowledge of Session Sharing
http://support.citrix.com/article/CTX159159
vLans are virtual LANs; each vLAN can be thought of as a seperate domain. If each server was in a different vLan they would be in different XenApp Farms so answer E is incorrect.
happens BEFORE load balencing so answer D is incorrect
QUESTION 17
XenApp users need to be able to move between client devices and reconnect to both active and disconnected sessions.
What action must an administrator take to enable this behavior?
A. Install Web Interface and XenApp with the default settings. B. Disable Workspace Control on each Web Interface server. C. Configure a XenApp policy to enable the Smooth Roaming feature. D. Ensure that the Web Interface server is in the same domain or forest as the XenApp farm.
Answer: A
Section: (none)
Explanation/Reference:
Workstation control (smooth roaming) are enabled by default on the XenApp Website and Services Site.
I could not find a policy for Smooth Roaming.
http://support.citrix.com/proddocs/topic/online-plugin-121-windows/ica-workspace-control-settings-v2.html
QUESTION 18
An application is published to users using the 'Streamed to client' delivery type.
Which two plug-in are required and where are they required for this application? (Choose two.)
A. Online plug-in on the client B. Offline plug-in on the client C. Offline plug-in on the XenApp server D. Online plug-in on the XenApp server
Answer: AB
Section: (none)
Explanation/Reference:
http://support.citrix.com/proddocs/topic/xenapp65-publishing/ps-stream-plugin-decide.html
Streamed to client desktops. With this method, you make available the full set of application streaming features. You can publish applications as "streamed to client" or any other method for streaming. When you stream applications directly to client desktops, some of the application files are cached locally and the application runs using the resources of the user device.
Install both the CitrixReceiverEnterprise.exe and CitrixOfflinePlugin.exe on user devices.
QUESTION 19
Scenario: A company has 10 XenApp servers. The administrator has changed the recovery action of the MS Print Spooler Test of Health Monitoring and Recovery to prohibit logons and
connections to the server. Users report printing problems when connecting to three of the XenApp servers.
Using Health Monitoring and Recovery to allow additional XenApp servers to be excluded from load balancing, the administrator should change the __________.
A. minimum percent of online servers default value of 5 percent B. maximum percent of offline servers default value of 5 percent C. minimum percent of online servers default value of 10 percent D. maximum percent of offline servers default value of 10 percent
Answer: D
Section: (none)
Explanation/Reference:
http://support.citrix.com/proddocs/topic/xenapp6-w2k8-admin/ps-maintain-monitor-server-perf.html
Maximum percent of offline servers (10 percent by default). Use this setting to specify the number of servers that the Health Monitoring and Recovery feature can exclude from load balancing.
QUESTION 20
Scenario: A server farm has three policies using the Client IP address and User filters.
- Policy A (priority 1) prevents client IP address in the 208.29.80.* range from accessing network and optical drivers. All other settings are disabled.
- Policy B (priority 2) prevents client IP address in the 208.29.85.* range from accessing network, client and removable drives. No other settings are configured.
- Policy C (priority 3) allows all domain users to access network, client, optical and removable drives. All other settings are disabled.
Which drives will be available to a domain user accessing the server farm from a client using the 208.29.85.152 IP address?
A. No drives B. Optical drives C. Client and removable drives D. Network, client and removable drives E. Network, client, optical and removable drives
Answer: B
Section: (none)
Explanation/Reference:
Policy B restricts client and removable drives, so that only leaves optical drives
Exam B
QUESTION 1
Scenario: A server farm has three policies applied using the User filter.
- Policy A (priority 1) denies domain users access to client and removable drives. No other settings are configured.
- Policy B (priority 2) allows domain users to access optical drives. No other settings are configured.
- Policy C (priority 3) allows domain users to access network, client and removable drives. No other settings are configured.
Which drives will be available to a domain user in the environment?
A. No drives B. Network drives C. Network and optical drives D. Network, client and removable drives E. Network, client, removable and optical drives
Answer: C
Section: (none)
Explanation/Reference:
Because Policy A denies client and removable drives, the only ones left are network and optical drives.
QUESTION 2
Scenario: Management requires that video conferencing is implemented on all of the desktops, including video, sound and a webcam, in the three training rooms on the education floor of the corporate building. Quality is of very high importance. The IT department decided to implement video conferencing using XenApp. Multimedia conferencing and Windows Media Redirection have been enabled and configured for the XenApp servers. The latest Citrix Receiver for Windows is installed on all of the desktops.
Which three steps should the administrator take to meet the needs of the scenario? (Choose three)
A. Publish Microsoft Office Premium 2007 in the XenApp farm. B. Publish Microsoft Office Communicator 2007 in the XenApp farm. C. Install Microsoft Office Communicator Server 2007 on a XenApp server. D. Install one webcam on each desktop and use the manufacture's drivers. E. Install one webcam on each desktop and let Windows find the appropriate driver. F. Install Microsoft Office Communication Server 2007 on a server that is NOT running XenApp.
Answer: BDF
Section: (none)
Explanation/Reference:
Multimedia Conferencing Policy help file:
Allows or prevents support for video conferencing applications. By default, video conferencing support is enabled.
To use multimedia conferencing, make sure the Windows Media Redirection setting is enabled.
* When using multimedia conferencing, make sure the following items are present:
* Manufacturer-supplied drivers for the web cam used for multimedia conferencing must be installed.
* The web cam must be connected to the client device before initiating a video conferencing session. XenApp uses only one installed web cam at any given time. If multiple web cams are installed on the client device, XenApp attempts to use each web cam in succession until a video conferencing session is created successfully.
* An Office Communicator server must be present in your farm environment.
* The Office Communicator client software must be published on the server.
Related Policies: Windows Media Redirection
QUESTION 3
A Citrix XenApp administrator needs to apply a policy to all users regardless of connection type.
Which type of policy should the administrator create?
A. Unfiltered User policy B. Unfiltered Computer policy C. User policy filtered by worker group D. Computer policy filtered by worker group
Answer: A
Section: (none)
Explanation/Reference:
By default, XenApp provides Unfiltered policies for Computer and User policy settings. The settings added to this policy apply to all connections.
http://support.citrix.com/proddocs/topic/xenapp6-w2k8-admin/ps-policies-applying.html
QUESTION 4
Scenario: A Citrix administrator manages a XenApp farm and applications are delivered through one Web interface. The administrator is required to apply a policy to all users accessing the XenApp farm through the Web Interface.
The administrator should filter the required User policy by ________ .
A. User B. Group C. Client Name D. Worker Group
Answer: C
Section: (none)
Explanation/Reference:
Since the policy needs to be applied to all users, it should be applied to the Domain Users Group, since by default every user will belong to that group. You could also put every user in an OU, but for this question OU is not once of the choices.
You can filter user policies by:
QUESTION 5
Scenario: A XenApp administrator needs to publish an application that will be streamed to traveling users so they launch the application when they are NOT connected to the network. The administrator also needs to provide the published application over an ICA connection. The user devices have been equipped with the appropriate plug-ins.
Which setting should the administrator choose when publishing the application?
A. Streamed to client B. Installed application C. Accessed from a server D. Streamed if possible, otherwise accessed from a server
Answer: D
Section: (none)
Explanation/Reference:
The application has to be streamed to be available offline on the client. Because of the ICA Connection requirement, it also has to be available on the server.
http://support.citrix.com/proddocs/topic/xenapp5fp-w2k3/ps-stream-apps-config-offline-access.html
QUESTION 6
Scenario: A XenApp administrator has been tasked with delivering a new application to the traveling sales force. The sales force will require access to applications even when they do NOT have internal or network access.
Which three steps are required to ensure that the sales force can access their applications at all times? (Choose three.)
A. Install the offline plug-in on the servers. B. Publish the application as streamed to client. C. Install the offline plug-in on the sales force laptops. D. Install the online plug-in on the sales force laptops. E. Publish the application as accessed from a server, streamed to server. F. Publish the application as accessed from a server, installed application.
Answer: BCD
Section: (none)
Explanation/Reference:
The application has to be published as streamed to client for it to be accessible offline. When the laptop has access to the xenapp server it uses the online plugin, when it doesnt it uses the offline plugin.
Before publishing an application to be streamed to client desktops, complete the following tasks:
Install the Offline Plug-in locally, where it runs in the background to enable application streaming.
Install the latest version of online plug-in locally.
To stream to client devices across a network protected by a firewall, configure firewall policies to allow those applications access.
After all of these tasks are complete, publish the application as Streamed to client.
http://support.citrix.com/proddocs/topic/xenapp65-publishing/ps-stream-apps-managing-wrapper.html
QUESTION 7
Scenario: A company has published a CRM application to the Sales staff. The Sale staff consists of people from different countries, and some of the staff uses a localized version of the operating system. When launching the application the users get the following error.
This application is NOT profiled for operating system language <language>
Which action can an administrator take to resolve this issue when profiling the streaming application?
A. Use a localized version of the software. B. Add a target for the particular operating system language. C. Use the `Select files folders' feature in Advanced Installed to copy localized language file into the package. D. Use the `Edit registry' feature in Advanced Installed to change system locale settings in the registry to match the settings Answer: B
Section: (none)
Explanation/Reference:
v4 - updated explanation, answer is the same
At any point you can edit a profile and add a targeted language as shown below:
To support other operating systems and languages, select the check boxes associated with those you want to support. When selecting target operating systems and languages, do not select those languages for which you are going to create separate targets.
http://support.citrix.com/proddocs/topic/xenapp-application-streaming-edocs-v6-0/ps-stream-profile-task-create-profile-yellowtail.html
QUESTION 8
Scenario: Users in an environment connect to the XenApp farm Linux based thin clients. They reported that they are NOT able to access the computer-based training course hosted on the XenApp server in the Microsoft Media Format (MMS). Windows-based users are NOT reporting this issue.
What could the administrator do to resolve this issue?
A. Disable host (server) to client redirection. B. Request the Linux thin clients to use the Java client.
C. Ensure these thin clients have the latest receiver client for Linux. D. Create a XenApp policy to enable HDX Flash redirection for the Linux thin clients.
Answer: A
Section: (none)
Explanation/Reference:
Host to client redirection:
http://support.citrix.com/proddocs/topic/xenapp6-w2k8-admin/ps-pub-content-redirect-server-task-v2.html
These URL types are opened locally when you enable this setting:
* Hypertext Transfer Protocol (HTTP)
* Secure Hypertext Transfer Protocol (HTTPS)
* Real Player and QuickTime (RTSP)
* Real Player and QuickTime (RTSPU)
* Legacy Real Player (PNM)
* Microsoft’s Media Format (MMS)
QUESTION 9
Scenario: An administrator is in the process of profiling a streaming package. The application needs unique user updates on a regular basis. How can the administrator minimize his workload when updating the streaming package?
A. Enable user updates to allow users to download applications from the Internet and store them in the user's root. B. Enable user updates to allow users to send update requests notifications to the administrator building the packages. C. Enable user updates to allow users the ability to update the streaming package with changes they make themselves. D. Enable user updates to allow users to update the main streaming package with changes that other users can benefit Answer: A
Section: (none)
Explanation/Reference:
http://support.citrix.com/proddocs/topic/xenapp-application-streaming-edocs-v6-0/ps-stream-profile-security-yellowtail.html
Select the check box to permit executable files that are accessed through the profiled application to run from the user profile root.
If you profile the application with this setting selected, the application can download vendor-supplied updates over the Internet. Any updates are stored as part of the user root, so they are unique to that user. The next time the user device connects to the profiled application on a server or file share, the streamed application will not overwrite the updates, and the application runs using the updates.
Selecting this setting is recommended for streamed macromedia plug-ins, which download extensions (DLLs) based on the content that is being processed. Also, some applications decompress DLLs during runtime that need to run from the user root.
QUESTION 10
Scenario: A XenApp administrator is tasked with delivering a new application to the XenApp farm. During testing, the administrator finds that the application is incompatible with existing applications installed on the XenApp servers. He CANNOT install the application on the servers.
The administrator is in the process of publishing this application. Click the `Exhibit' button to view a screenshot of the Publish Application window.
Which streaming option should the administrator use to publish the application so that iPhone mobile device users can access the application?
Exhibit:
A. Streamed to client B. Accessed from a server - Streamed to server C. Accessed from a server - Installed application D. Streamed it possible, otherwise accessed from a server
Answer: B
Section: (none)
Explanation/Reference:
v4 - previous answer was A, new answer B
Iphones dont support streamed to client (as far as I could tell), therefore you have to stream to the device by streaming to the xenapp server.
C&D are invalid because you CANNOT install the application on the xenapp server - has to be streamed.
QUESTION 11
Which steps should an administrator take to publish applications that will be accessed through Web Interface and presented in different folders?
A. Publish the applications as Content instead of Applications. B. Create a folder under the Application node and put the specific application in the folder. C. In the application properties, in the location section, change the working directory to match the folder name. D. In the application properties, in the Shortcut presentation section, fill in a name for the Client application folder.
Answer: D
Section: (none)
Explanation/Reference:
Once of the biggest misconceptions people have is that the folder in Appcenter is what users will see. No! To have users see a folder you need to specify it here. The folder in appcenter is only for administration it has no effect on publishing.
QUESTION 12
Users in an environment need to be able to open Microsoft Office documents using the software installed on the XenApp server even if the user has NOT started a Citrix session.
What must the administrator configure to meet the requirements of the scenario?
A. Offline streaming B. File Type Association
C. Host (server) to client redirection D. Client to host (server) redirection
Answer: D
Section: (none)
Explanation/Reference:
Client to Server redirection is what Citrix call it when you redirect the local file associations to the server to open a local file with a published app. You do not need to manauly start an app for this to work. http://support.citrix.com/proddocs/topic/xenapp6-w2k8-admin/ps-pub-content-redirect-client-task-v2.html
QUESTION 13
Scenario: A Citrix administrator manages a mixed environment consisting of desktops, XenApp and XenDesktop. Management desires that:
- login times be decreased
- user profiles are stored in a centralized location
- user changes be saved
- user changes be made available to user sessions accessed from any desktop, XenApp server or XenDesktop connection
Based on these requirements, which type of profile should the administrator implement?
A. Local B. Roaming C. Mandatory D. Citrix Profile Management
Answer: D
Section: (none)
Explanation/Reference:
Mandatory profiles do not allow user changes to be saved, so option C is incorrect
Local does not allow a centralized location, so option A is incorrect
Mandatory profiles are not accessible on desktop, xenapp, and xendesktop, and Mandatory profiles are very slow on login time, so answer C is incorrect
Only citrix profile management fit all options
http://support.citrix.com/servlet/KbServlet/download/19059-102-665944/ProfileMgtCrossPlatformFAQ.pdf
"The short answer is yes. Profile management can apply a profile based on the local
desktop, XenApp, or XenDesktop, or any combination or multiples of these."
QUESTION 14
Scenario: An administrator is setting up access for the User Support team. The administrator
wants to give this team access to manage user sessions so that they can disconnect and either clear or log-off user sessions for troubleshooting purposes.
Which node would the administrator use in order to delegate these permissions in the AppCenter?
A. Policies B. Servers C. Applications D. Administrators
Answer: D
Section: (none)
Explanation/Reference:
To delegate this permission add a new administrator and select custom, as shown below
QUESTION 15
Scenario: An administrator receives word that the IT Manager wants the Domain Admin group to have rights within the XenApp farm to help support the infrastructure. The administrator agrees but wants to restrict them from publishing applications.
In which two ways could the administrator set these permissions? (Choose two.)
A. Map the Domain Admin's Active Directory group to a Custom Administrator's role in the AppCenter and remove the
Application. B. Add Each Domain Admin's Active Directory account to a Full Administrator's role in the AppCenter and remove the Application. C. Map the Domain Admin's Active Directory group to a Full Administrator's role in the AppCenter and uncheck remove Publish Application. D. Create a Custom Administrators group in Active Directory, map that to a Custom Administrator's role in the AppCenter Publish Application.
Answer: AD
Section: (none)
Explanation/Reference:
You can only give custom permission by adding a custom citrix administrator. Full administration does NOT allow you to customize permissions
QUESTION 16
A XenApp administrator discovers that a XenApp server which was previously deleted from the AppCenter is still listed in the console. Which command can the administrate run to force removal of the erroneous server record?
A. dscheck B. dscheck /clean C. dsmaint recover D. dsmaint recreatelhc
Answer: B
Section: (none)
Explanation/Reference:
http://support.citrix.com/proddocs/topic/xenapp5fp-w2k3/ps-commands-dscheck.html
When you run dscheck with the /clean option, the utility runs tests and removes inconsistent data (typically servers and applications) from the data store. Because removing this data can affect the farm’s operation, be sure to back up the data store before using the /clean option.
QUESTION 17
An administrator wants to configure configuration logging for two XenApp farms. Which two tasks must the administrator configure to accomplish this? (Choose two.)
A. Configure separate MS SQL databases for each XenApp farm B. Configure one MS SQL database for both XenApp farms to connect to C. Enable configuration logging for each farm and connect to a single database. D. Enable configuration logging for each farm and connect to two separate databases
Answer: AD
Section: (none)
Explanation/Reference:
You cannot share the same sql configuration database with 2 different farms.
To enable configuration loggin:
1. Open appcenter
2. Right click on the farm name, select farm properties
3. configure the database
QUESTION 18
Scenario: An administrator has published Microsoft Excel on two identical servers and has placed those servers in a worker group. There are 150 users in the environment, and each server must be allowed to accept all 150-user sessions for failover purposes. All users start work at 09:00 in the morning. The administrator also wants to prevent the servers from failing due to excessive connection attempts during this logon time.
What can the administrator do to ensure that the server farm can meet these requirements?
A. Assign the default load evaluator to the worker group. B. Assign the advanced load evaluator to the worker group. C. Create a load balancing policy and assign it to the worker group. D. Create a custom load evaluator and assign it to the worker group.
Answer: D
Section: (none)
Explanation/Reference:
Default and custom load evaluator won't look at application load. Created a custom load evaulator with application user load checked, and type in 150 as shown below. Apply it to the worker group.
This rule allows your load evaluator to calculate a load based on the number of users accessing a specific published application on the attached server.
When the number of users accessing the published application is less than or equal to the threshold value indicated here, Load Manager reports a load percentage based on the threshold value.
The valid range for this rule is 1 to 10000.
QUESTION 19
Scenario: A server farm consists of dual and single processor servers. The administrator wants to ensure that the dual-processor servers receive more sessions than the single-processor servers. In addition the administrator wants to ensure that no server receives more than 100 user sessions.
In order to meet these requirements, the administrator must assign the__________. (Choose the correct option to complete the sentence.)
A. custom load evaluator rule to all servers. B. advanced load evaluator rule to all servers C. custom load evaluator role to all dual processor servers D. advanced load evaluator rule to all dual-processor servers
Answer: A
Section: (none)
Explanation/Reference:
Default Load Evaluator:
- Load Throatling = High - Server User Load = 100 (max number of user sessions) Advanced Load Evaluator: - CPU Utilization, Low = 10, Full = 90 - Load Throatling = High - Memory usage, Low = 10, Full = 90 - Page Swaps, Low = 10, Full = 90 You need a custom load evaluator to decide load based on CPU and with a max number of 100 user sessions. http://support.citrix.com/proddocs/topic/xenapp6-w2k8-loadmgr/lm-using-work-loadevals.html
QUESTION 20
Scenario: An administrator wants users in their two regions to utilize the XenApp servers in their own region to get the best performance from their applications but automatically fail over to the alternate region. The administrator creates an Active Directory group for each region.
The administrator should create___________ and___________ (Choose the correct option to complete the sentence.)
A. one worker group, one load balancing policy B. two worker groups, one load balancing policy C. one worker group, two load balancing policies D. two worker groups, two load balancing policies
Answer: D
Section: (none)
Explanation/Reference:
- One worker group for the servers in each of the two regions means two worker groups. For example all the west coast servers would be in a west coast worker group and the east coast servers in an east coast worker group. - Each region needs to prioritise its own worker group first. For example if there were two regions (east coast and west coast), the east coast region would have priority 1 for the east coast worker group and priority 2 for the west coast worker group. Where as the west coast region would need to have the oposite requirements (ie: priority 1 for the west coast worker group and prioirty 2 for the east coast worker group). Therefore since each region has different priority requirements they must have there own Load Blanacing Policy, which means we need two load balancing polices not one.
Exam C
QUESTION 1
Scenario: An administrator has a server farm with five servers. The administrator wants to limit the number of Microsoft Excel published application sessions that can be run in the server farm.
Which two steps could the administrator take to meet this requirement? (Choose two)
A. Configure the Load Throttling rule. B. Configure the Server User Load rule C. Configure the Application User Load rule D. Assign a load evaluator to the five servers. E. Assign a load evaluator to the published application
Answer: CE
Section: (none)
Explanation/Reference:
In previous versions of XenApp you could apply a load evaluator to a server - no more! You can only apply a load evaluator to 1) published application 2) worker group (by creating a policy). Therefore option D is incorrect.
http://support.citrix.com/proddocs/topic/xenapp65-admin/lm-using-attach-loadval-all.html
Assigning Load Evaluators to Servers and Applications
Updated: 2011-08-04
To participate in load management, each server or published application must have a load evaluator assigned to it. Each server or published application can have only one load evaluator attached.
To assign a load evaluator to a XenApp server, configure the Load Evaluator Name policy setting and filter the policy by worker group. You can assign load evaluators that are available in any XenApp farm. The rules and their settings determine how the load of a particular server or published application is managed.
For example, if you have a published application that uses a significant percentage of a server’s memory and processing capabilities, you can add the Load Evaluator Name setting to a policy, specify the Advanced load evaluator, and filter the policy by the worker group that contains all the XenApp servers hosting the application. XenApp then distributes the available memory and processor demand across the load-managed servers.
When you assign a load evaluator through Citrix policies, XenApp does not validate the load evaluator name when the policy is applied to user sessions. Therefore, if the load evaluator is later renamed or deleted, the load cannot be calculated. Instead, XenApp logs an error to the Event Log and the affected servers report a load index of 10,000 (full load). Additionally, the Usage by Server tab in the middle pane of the AppCenter does not indicate the load evaluator is assigned. To ensure the policy references the correct load evaluator name, modify the Load Evaluator Name policy setting and select the correct load evaluator name from the list of available load evaluators.
If the policy containing the Load Evaluator Name setting is deleted, and no other policy applied to the server specifies an alternate load evaluator, XenApp uses the Default load evaluator instead.
To assign a load evaluator to a server
Create a new Computer policy or select an existing Computer policy you want to modify. Depending on the console you use to manage Citrix policies:
From the AppCenter, select the Policies node and then select the Computer tab.
From the Group Policy Management Editor, select Computer Configuration > Policies > Citrix Policies.
From the settings list, locate the Load evaluator name policy setting and click Add.
Select a load evaluator from the drop-down list and then click OK.
Add the Worker Group filter to the policy and specify the worker group containing the servers to which you want to assign the load evaluator.
To assign a load evaluator to a published application
From the AppCenter, select the Applications node in the left pane.
Select the published application to which you want to attach a load evaluator.
From the Actions pane, select Other Tasks > Attach application to load evaluator.
On the Assign Load Evaluator dialog box, select the load evaluator to attach.
QUESTION 2
Scenario: A server farm has five servers which are members of the FARM worker group. Multiple applications are published on the servers for use by over 100 employees. One of the applications has only 10 licenses.
What could the administrator do to allow only 10 employees to use that specific application at any given time?
A. Set the concurrent logon limit to 10. B. Apply the limit user sessions policy using a filter. C. Assign a load evaluator to the published application. D. Apply the connection access control policy using a filter.
Answer: C
Section: (none)
Explanation/Reference:
Option A is invalid because it would affect ALL published applications, the question is very specific to 1 application.
Option B would apply to ALL users because they all belong to the same worker group
Option C is correct is it only applies to the published application
QUESTION 3
Scenario: A server farm has 12 servers in the FARM worker group with more than 1,000 users and 20 published applications. Two of the published applications perform excessive CPU context switches.
What can the administrator do to ensure that the resource-intensive applications will run optimally in the server farm?
A. Assign a load evaluator to the FARM worker group. B. Assign a load evaluator to both resource-intensive applications. C. Apply the multi-Steam policy to both resource-intensive applications. D. Apply the session importance policy to both resource-intensive applications
Answer: B
Section: (none)
Explanation/Reference:
v4 - answer changed.
Answer should be B, previously was D. A load evaluator can look at cpu context switches, but the default and advanced dont look at that. So you need to create a custom load evaluator with cpu context switches enabled, and apply it to the 2 applications.
QUESTION 4
Which policy should an administrator configure so that if all servers in a worker group go offline, XenApp redirects user connections to a backup worker group?
A. Citrix User B. Load Evaluator C. Load Balancing D. Citrix Computer
Answer: C
Section: (none)
Explanation/Reference:
A load balencing policy can be used with worker groups
QUESTION 5
Scenario: An administrator plans to add printer drivers to the auto-replication list in a XenApp 6.5 environment. The administrator needs to ensure that a specific vendor printer driver is available on all servers in the farm including any new servers that are added at a later date.
How must the administrator add printer drivers to the auto-replication list?
A. Through a Citrix policy B. With a PowerShell cmdlet C. With the PrintCfg.exe tool D. In a per-server registry setting
Answer: B
Section: (none)
Explanation/Reference:
http://support.citrix.com/article/CTX126125
Auto-Replication List
Run the following cmdlet to add a print driver to the auto-replication list. Type Add-XAAutoReplicatedPrinterDriver–DriverName “<name of driver>” –SourceServerName XASource, where <name of driver> is the exact name of the print driver and XASource is the source server and press Enter.
The output should be returned confirming the driver name, source server, and that we do not wish to overwrite the driver if it exists (the default). This is the same output we receive when running the Get-XAAutoReplicatedPrinterDriver cmdlet.
After waiting a moment, type Get-XAPrinterDriver –ServerName XADest, where XADest is the name of a XenApp server that did not originally contain the print driver that was just added to the replication list.
If you should choose to remove a print driver from the auto-replication list, type Remove-XAAutoReplicatedPrinterDriver –DriverName “<name of driver>” –ServerName XASource, where <name of driver> is the exact name of the print driver and XASource is a source server.
QUESTION 6
Scenario: An administrator needs to use the session printers policy to provision network printers from a 32-bit print server to XenApp users. Native Windows drivers are NOT available to these printers.
Which step should the administrator take prior to implementing the session printers policy in this environment?
A. Configure the printer driver mapping and compatibility policy B. Enable the automatic installation of in-box printer drivers policy C. Install the corresponding 32-bit printer driver on the XenApp servers D. Install the corresponding 64-bit printer driver on the XenApp servers
Answer: D
Section: (none)
Explanation/Reference:
Use the printer driver mapping and compatibility policy to map a driver to an existing driver
QUESTION 7
Scenario: A company's Senior Citrix Administrator requested that an administrator reconfigure the printing policies in a test XenApp 6.5 farm. The Citrix Universal Printer Driver will be used exclusively and the number of auto-created printers on the server should be kept to a minimum to conserve resources.
Which two policies should the administrator configure to meet these requirements?
(Choose two.)
A. Disable the client printer redirection policy. B. Enable the policy for the generic universal printer. C. Enable the policy for the printing preview preference. D. Configure the auto-create client printers policy so that client printers are NOT auto-created. E. Configure the printer driver mapping and compatibility policy to map all drivers to the Citrix Universal Printer Driver.
Answer: BD
Section: (none)
Explanation/Reference:
"exclusively" = E
"minimum to conserve resources" = D
QUESTION 8
An administrator performs an installation of XenApp without changing any of the default settings. When a user connects with a client printer that does NOT have a suitable driver installed, but does have a suitable driver available in the driver store, which action will happen?
A. The printer will be mapped using similar provided driver. B. The printer will be mapped using the Citrix Universal Driver. C. The driver will be installed and mapped using the newly installed driver. D. The driver will be installed, and the printer will be mapped using the Citrix Universal Driver.
Answer: C
Section: (none)
Explanation/Reference:
During printer auto-creation, if XenApp detects a new local printer connected to a client device, it checks the server hosting the published application (from which the user is trying to print) for the required printer driver. By default, XenApp automatically installs a native driver if one is not found on the server hosting the published application.
http://support.citrix.com/proddocs/topic/xenapp65-admin/ps-printer-driver-managing.html
QUESTION 9
Which two Citrix printing tools can assist a XenApp administrator when working with printer drivers? (Choose two)
A. Print Migrator B. Stress Printers C. Print Detective D. The Citrix Printing Tool
Answer: BC
Section: (none)
Explanation/Reference:
A and D do not troubleshoot a printer driver
Print Migrator (Windows tool)
Print Migrator provides complete backup, restore and migration operations for Windows NT-based operating systems from Windows NT 4 to Windows 2003.
Stress Printer Tool
This tool can be used to simulate multiple sessions autocreating printers using the same printer driver.
Citrix Printing Tool
Citrix Printing Tool 3.1 helps configuring and troubleshooting the Citrix Printing subsystem on XenApp, XenApp Online Plugin, and XenDesktop.
Print Detective:
Print Detective is an information gathering utility that can be used for troubleshooting problems related to print drivers. It enumerates all printer drivers from the specified Windows machine, including driver specific information. It can also be used to delete specified print drivers. It allows for log file capabilities and provides a command-line interface as well.
Stress Printers & Print Detective are the two tools that a designed to work with drivers, so these should be the correct answers. http://support.citrix.com/article/CTX109374 http://support.citrix.com/article/CTX116474
QUESTION 10
Scenario: For users at remote offices, network printers are defined on their workstations. A print server is located in each remote office. The WAN link speed to the datacenter varies and the administrator would like to ensure the best possible printing performance for these XenApp users.
Which step should the administrator take to address the group of users with minimal required effort?
A. Enable the session printers policy. B. Disable the direct connections to print servers policy. C. Reconfigure the network printers as local printers on the workstations. D. Ensure that the vendor printer driver is installed on all XenApp servers in the farm.
Answer: B
Section: (none)
Explanation/Reference:
Option A is invalid because the question already says the "network printers are defined on their workstations"
Option C is invalud because it says "minimal required effort"
Opton D is invalud because there's no problem with the drivers, the problem is with bandwidth.
Option B is correct.
By default, XenApp routes jobs to network printers from the application server directly to the print server (along the network printing pathway).
Note: Print jobs sent over the network printing pathway are not compressed. When routing printing jobs across a network with limited bandwidth, Citrix recommends routing jobs through the client device so that the ICA protocol compresses the jobs. To do so, disable the Citrix policy setting Direct connection to print servers.
http://forums.citrix.com/thread.jspa?threadID=288722
QUESTION 11
Scenario: The IT administrator at an online education institution manages a XenApp farm that provides access to lectures and other class materials. The students and faculty members connect to the XenApp farm published applications from remote computers that are NOT part of the corporate Active Directory domain. Each student and faculty stuff member is assigned a unique set of Active Directory credentials with a password expiration policy of 15 days. The administrator
needs to allow users to change their passwords from the Web Interface site since the computers are NOT part of the domain.
In order to configure the Web Interface to allow students and faculty members to change their passwords from the Web Interface site, the administrator could allow users to change expired passwords by contacting the ________. (Choose the correct option to complete the sentence.)
A. data store B. server farm C. domain controller directly D. domain controller directly with fallback to the data store.
Answer: B
Section: (none)
Explanation/Reference:
This question is misleading because you can only enable this setting for the services site, NOT the web site. As you see below select the option for "server farm".
http://support.citrix.com/proddocs/topic/web-interface-gransden/wi-configure-password-settings-prompt-gransden.html
QUESTION 12
An administrator would need to add multiple farms to a Web Interface configuration to ______. (Choose the correct two options to complete the sentence.)
A. protect against IMA failure B. load balance the XML Service C. consolidate applications from multiple farms D. increase the performance of application enumeration E. provide a seamless migration path across farm upgrades
Answer: CE
Section: (none)
Explanation/Reference:
QUESTION 13
Scenario: An administrator has configured three Web Interface sites. The sites are configured to fail over to another site if a site failure occurs. After a failure occurs, the failing site is NOT available for connections for one hour. The administrator wants to lessen the amount of time that the failing site is unavailable.
What can an administrator do to lessen the amount of time the site is unavailable?
A. Adjust the `socket timeout' setting. B. Adjust the `bypass any failed server' setting. C. Configure the `disconnected session timer' setting. D. Configure Health Monitoring and Recovery to restart the server upon failure.
Answer: B
Section: (none)
Explanation/Reference:
http://support.citrix.com/article/CTX122029
QUESTION 14
Which step could an administrator take to ensure better SSL performance on three new XenApp farms?
A. Enable load balancing B. Increase XML timeout C. Enable socket pooling D. Increase socket timeout
Answer: C
Section: (none)
Explanation/Reference:
http://support.citrix.com/proddocs/topic/web-interface-gransden/wi-enable-socket-pooling-gransden.html
To enable socket pooling
Updated: 2009-08-15
When socket pooling is enabled, the Web Interface maintains a pool of sockets, rather than creating a socket each time one is needed and returning it to the operating system when the connection is closed. Enabling socket pooling enhances performance, particularly for SSL connections.
Socket pooling is available only for sites created with the authentication points At Web Interface or At Access Gateway. Socket pooling should not be used when the Web Interface is configured
to use one or more servers running XenApp for UNIX.
On the Windows Start menu, click All Programs > Citrix > Management Consoles > Citrix Web Interface Management.
In the left pane of the Web Interface Management Console, click XenApp Web Sites or XenApp Services Sites, as appropriate, and select your site in the results pane.
In the Action pane, click Server Farms.
Click Advanced.
In the Socket Pooling area, select the Enable socket pooling check box.
QUESTION 15
A XenApp administrator has been tasked with providing two factor authentication to a Web Interface server.
Which three types of two-factor authentication are supported by the Citrix Web Interface server by default? (Choose three.)
A. Radius B. Authenex C. Safeword D. SecureStar E. RSA Secure ID
Answer: ACE
Section: (none)
Explanation/Reference:
http://support.citrix.com/proddocs/topic/web-interface-gransden/wi-configure-two-factor-authentication-gransden.html
QUESTION 16
Scenario: Remote users require access to published applications from mobile devices that do NOT use a Windows operating system. To support these users, the administrator has installed and configured an Access Gateway that will secure traffic for the remote users.
In order to allow the remote users to access resources from the Web Interface, which type of site should be configured to integrate with the Access Gateway?
A. XenApp Web site B. XenApp Services site C. XenApp Services with dual-factor authentication D. XenApp Services site with SmartCard Pass-Through
Answer: A
Section: (none)
Explanation/Reference:
http://support.citrix.com/article/CTX121360
QUESTION 17
The IT Director has approved the use of Apple iPad to access the corporate customer database system when the devices are connected to the local wireless network.
Which type of Web Interfae site must be configured to allow iPad users to access the customer database system published on the XenApp servers?
A. XenApp Web site B. XenApp Services site C. XenApp Services with dual-factor authentication only D. XenApp Services site with Pass-Through authentication only
Answer: B
Section: (none)
Explanation/Reference:
v4 - answer changed from B to D
The quesiton has 2 requirements:
1) You can only use an iPad with a services site, NOT a website.
2) Question says "connected to the local wireless network", therefore you need pass-through authentication so users are only authenticated in the local network.
(UPDATED, this makes no sense what so ever as the pass through has nothing to do with wireless but refers to passing the logged on Windows user credentials through to XenApp. Since the person is using an iPad they would not be using Windows Active Directory credentials to pass through. So this is not really an option.) The scenario gives no information about the wireless setup, so to assume that it is single sign is just weird. It's purely a physical method of connecting the iPad to the LAN, since iPads do not have a rj45 ethernet port the logical method of connection to a LAN would be wireless.
http://support.citrix.com/article/CTX121360
QUESTION 18
When using the Gateway Direct secure access method in the Web interface, the XenApp administrator must provide the __________of the Access Gateway server. (Choose the correct option to complete the sentence.)
A. IP address B. SSL certificate
C. NetBIOS name D. Fully Qualified Domain Name (FQDN)
Answer: D
Section: (none)
Explanation/Reference:
http://support.citrix.com/article/CTX121360
QUESTION 19
Scenario: Printing has been configured in a single-server farm. Recently, the help desk has received calls from users starting that they are unable to see their printers. Upon logging into the server, the administrator notices that some auto-created printers are present.
Which three troubleshooting steps should the administrator perform? (Choose three.)
A. Confirm the resultant set of Citrix policies. B. Check the event logs on the XenApp servers. C. Check the event logs on the client workstations. D. Restart the Print Spooler on the XenApp servers. E. Verify that the Citrix Print Manager Server is running.
Answer: ABE
Section: (none)
Explanation/Reference:
Since the issue happened "recently" it's likely a policy is causing the problem. Since the admin can see the printers restarting the spooler service or verifying the print manager service is running wouldn't accomplish anything. Since a policy is causing the problem there should be an error in event viewer on the client and/or server
QUESTION 20
Scenario: An entire Shift of workers arrives at the office at 09:00 AM. Two thousand users turn on their thin client terminals and launch a line of business application within a ten-minute timeframe. The resultant traffic is so intense that it takes 15-20 minutes until everybody is able to start working.
How can the administrator prevent this issue from affecting the user experience?
A. Implement a NetScaler load balancer to distribute the XML traffic B. Configure a Pre-launch application to be started for users before they arrive. C. Upgrade the XenApp farm database server to a cluster with real time replication. D. Configure additional zone data collectors to manage the numerous concurrent logins.
Answer: B
Section: (none)
Explanation/Reference:
A is incorrect because the problem is not load balencing, it's people have to wait for their session to start
C and D won't do anything
B is correct because pre-launch causes the citrix session to be started BEFORE users access an application. This greatly speeds up the wait time.
Exam D
QUESTION 1
Scenario: Users complain that first thing in the morning they receive errors when trying to launch their application and have to re-try many times. At other times of the day, there are NO issues. What could be causing the morning issue?
A. A load throttling load evaluator is limiting the number of concurrent logons. B. A scheduling to load evaluator is restricting the maximum server load at this time. C. A server load evaluator is limiting the number of concurrent users in the farm. D. An application user load evaluator is limiting the maximum number of users allowed to run the application.
Answer: A
Section: (none)
Explanation/Reference:
Since this only happens during the busiest time of the day there's probably restrictions on max concurrent logons
QUESTION 2
Scenario: An administrator is unable to start the IMA Service on a single XenApp server. The administrator suspects another administrator may have changed the contents of the file that holds the connectivity information for the server to the data store server.
Which file should the administrator check to verify the service connectivity information?
A. <install drive>:Program Files\Citrix\Independent Management Architecture\MF20.dsn B. <install drive>:Program Files\Citrix\Independent Management Architecture\MF20.mdb C. <install drive>:Program Files(x86)\Citrix\Independent Management Architecture\MF20.dsn D. <install drive>:Program Files(x86)\Citrix\Independent Management Architecture\MF20.mdb
Answer: C
Section: (none)
Explanation/Reference:
http://support.citrix.com/article/CTX105257
Since you can only install XenApp 6.5 on Server 2008 r2 x64 the location is C:\Program Files (x86)\Citrix\Independent Management Architecture\MF20.dsn
QUESTION 3
Scenario: an administrator is notified that a single XenApp server has an issue with starting the IMA Service. A quick check of all dependent services shows there are NO issues. When the administrator checks the MF20.dsn file using Notepad, the file is unreadable and contains miscellaneous junk.
In order to quickly resolve this issue, the administrator should copy the _________. (Choose the correct option to complete the sentence.)
A. contents only of a working server's IMA folder B. folder and contents from a working server's IMA folder C. MF20.dsn file from another server and reinstall XenApp 6.5
D. MF20.dsn file from another server, renaming the hostname of the XenApp Server
Answer: D
Section: (none)
Explanation/Reference:
A, This will copy over a working version of the currupted file. B, C, This would take to long, the question say to 'quickly resolve' this issue D, Changing the hostname of the server is wrong, because the server name in this file refers to the server that holds the database not the hostname of the XenApp server. If you change this setting the XenApp server would not be able to find the datastore.
QUESTION 4
Scenario: An administrator supports a XenApp farm consisting of 30 servers which should be fitted with the same hardware. Users are connecting to the servers using a published desktop. Some users complain that applications sometimes become slow and unresponsive. Users are spread evenly across all servers. The administrator looks in the AppCenter and discovers that the complaining users are all on the same five servers. After examining the five servers, the administrator discovers that they all are memory swapping.
Which next step should the administrator take to troubleshoot this issue?
A. Use Process Monitor to investigate file usage. B. Check the servers for hardware discrepancies. C. Create a Computer policy that enables Memory Optimization. D. Use Performance Monitor to investigate queue length on disc.
Answer: B
Section: (none)
Explanation/Reference:
A, It's a memory problem not a file usage issue B, The question does not explicitly state that the hardware is identical as the old explantion said, but rather said it 'should be the same'. The first logical step to take is to check that the hardware is as what it is supposed to be. Just because something should be the same doesnt mean you should just assume that it is, it's more than likely that the RAM is less than it should be for what ever reason. eg: Either due to failed hardware (a memory module is faulty) or incorrect setup (eg: hardware vender mis configure the system). C, There is nothing in the question to indicate that these servers are running different polices from the other servers so this seems unlikely to be a solution. D, It's a issue with not enough memory and is only memory swapping because it doesnt have enough RAM, the disk usage is a symtom but not a cause of low memory.
QUESTION 5
Scenario: A company has 20 machines and 20 users. The 20 users are split into two shifts so that only 10 people are connected to the XenApp 6.5 farm at any one time. Now, a third shift of 10 new users is being added.
In order to ensure that the 10 new users can get connected to XenApp 6.5, the administrator must purchase and install 10 additional _________. (Choose the correct option to complete the sentence.)
A. client machines B. XenApp 6.5 concurrent licenses C. Microsoft Remote Desktop Services user client access licenses D. Microsoft Remote Desktop Services machine client access licenses
Answer: C
Section: (none)
Explanation/Reference:
http://support.citrix.com/proddocs/topic/licensing/lic-getting-started.html
QUESTION 6
Scenario: All users are unable to launch applications from the Web Interface. They receive the following error:
An error occurred while making the requested connection.
Which action should the administrator take next to troubleshoot the issue?
A. Restart the XenApp servers B. Restart the client machines C. Restart the Web Interface server D. Review the error logs on the web server E. Review the error logs on the client machines F. Review the error logs on the XenApp servers
Answer: D
Section: (none)
Explanation/Reference:
http://support.citrix.com/article/CTX127053
QUESTION 7
Scenario: Users are receiving the error shown in the attached exhibit when connecting to Notepad on XenApp. The administrator runs the QUERY FARM command on the server and receives results in the second attached exhibit.
Which configuration component is causing the high application load?
A. An Active Directory group policy B. A load balancing preference policy C. A load evaluator applied to the server D. A load evaluator applied to the application
Answer: D
Section: (none)
Explanation/Reference:
This first exhibit should look something like this:
A server load of 20000 means the server is full and will not accept any new connections, and you will see the error in exhibit 2. This is a very common error. Since this is a server error caused by high load, changing the load evaluator could lower it so the server is responsive again.
If you wanted to see the application load you would run qfarm /app, as shown below. This would show you if its just a problem with notepad or a problem with the server
http://support.citrix.com/article/CTX131584
Exam E
QUESTION 1
Scenario: An administrator is hired to implement a new XenApp server farm in an existing network. Because of the existing network security practices, the administrator has to separate the Citrix license server from the XenApp server farm with a firewall.
Which two port should the administrator ask the network security team to configure on the firewall to allow the XenApp servers to contact the Citrix license server? (Choose two.)
A. 2512 B. 2513 C. 7279 D. 8082 E. 27000
Answer: CE
Section: (none)
Explanation/Reference:
QUESTION 2
Which two methods can an administrator use to manually install a third-party printer driver while ensuring that only the core required driver components are present in the XenApp enviornment? (Choose two)
A. The AppCenter B. Print Server Properties C. The XenApp Server Role Manager D. The vendo-supplied setup.exe file E. The Microsoft Print Management Console
Answer: BE
Section: (none)
Explanation/Reference:
QUESTION 3
Scenario: A XenApp administratror has been tasked with building XenApp server as generically as possible. Other than the operating system, required updates, patches and anti-virus software, the servers are to be kept as identical as possible to allow for quick disaster recover should the need arise. Bandwidth is restricted and the client machines run operating systems other than Windows. Therefore, streaming applications to the client machines in NOT possible.
Which setting must the administrator select when publishing the application?
A. Streamed to client B. Accessed from a server, streamed to server C. Accessed from a server, installed application D. Streamed if possible, otherwise accessed from a server
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 4
Scenario: Corporate security policies mandate that NO application can display network information, including domain names. The company has multiple XenApp farms which reside in different Active Directory domains that do NOT have trust relationships between then. The administrator has installed and configured a Web Interface server with a XenApp Web site that aggregates all the different farms into a single point of access.
Based on the corporate security policy restrictions, the administrator could configure the Web Interface to only allow users to authenticate using username format username@domain.name by Authentication Type, Window or NIS (UNIX), ____________. (Choose the correct option to complete the sentence).
A. UPN Only B. Domain Username only C. Domain Username and UPN D. Domain Username and Password
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 5
Scenario: A Citrix XenApp administrator needs to apply a policy to all servers. The administrator needs to ensure that all servers always receive the required policy.
Which type of policy should the administrator create?
A. Unfiltered User Policy B. Unfiltered Computer Policy C. User policy filtered by worker group D. Computer policy filtered by worker group
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 6
Scenario: An administrator manages a XenApp 6.5 fam with one zone. All servers in the zone have identical hardware and software. The zone is configured with a primary data collector with a preference of Most Preferred and a backup data collector with a prefenrece of Preferred. All other XenApp servers in the zone have a preference of Not Preferred.
If both the primary and backup zone data collectors are turned off, the XenApp server in the zone that will be elected the new primary zone data collector is the one ____________.
(Choose the correct option to complete the sentence).
A. with the lowest Host ID number B. with the highest Host ID number C. that reponds last to eh election request D. that reponds first to the election request
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 7
Scenario: An administrator manages a server farm containing nine servers. The servers are organized into three worker wroups based on the geographic location of users accessing the applications. User in all geographic locations are accessing the applications in the server farm 24 hours a day, seven days a week.
The administrator would like to restart the servers on a regular basis.
Which two tasks should the administrator perform to automate the restarting tof the servers without impacting user access? (Choose two).
A. Create zones for the servers in each worker group. B. Configure reboot policies and apply them to the appropriate worker groups. C. Create three worker groups containing a server from each existing worker group. D. Configure the Health Monitoring policy and apply it to the appropriate worker groups. E. Configure the Citrix IMA Service test to restart the servers and apply it to appropriate worker groups.
Answer: BC
Section: (none)
Explanation/Reference:
QUESTION 8
An administrator of a XenApp 6.5 enviornment needs to determine which printer drivers are native to the operating system and which ones are provided by the vendor.
Which two can the administrator user to find this information? (Choose two).
A. AppCenter B. PnPUtil.exe C. Print Detective D. Configuration Logging report
Answer: BC
Section: (none)
Explanation/Reference:
QUESTION 9
Scenario: A server farm has three policies applied with the User filter.
Policy A (priority 1) allows domain users to access network, client and removable drives. No
other settings are configured.
Policy A (priority 2) allows domain users to access optical drives. No other settings are
configured.
Policy A (priority 3) denies domain users access to client and removable drives. No other
settings are configured.
Which drives will be available to domain users in the enviornment?
A. No drives
B. Optical drives
C. Network and optical drives
D. Network, client and removable drives
E. Network, client, removable and optical drives.
Answer: E
Section: (none)
Explanation/Reference:
QUESTION 10
For change management reasons, a XenApp administrator has been tasked with reviewing log
configuration changes made to the XenApp farm.
Click the 'Exhibit' button to view a screenshot of the AppCentre.
Where would the administrator access this data?
Exhibit:
A. Farm node in the AppCenter choosing the History node B. Farm node in the AppCenter choosing the Information tab C. Server node in the AppCenter choosing the Information tab D. Event Viewer in the Operating system under the System node
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 11
Scenario: The User Support Desk will be taking on frontline troubleshooting of the Citrix farms in response to user issues. The administrator wants the Support Desk staff to do basic user troubleshooting without having production server farm permissions. All users are added to an appropriate Active Directory group.
Which step must the administrator take in the AppCenter to meet the requirements of the scenario?
A. Assign Custom permissions B. Assign Full Administration permissions C. Assign the users to Read-Only permissions D. Assign a Custom Group Policy Object to the organizationla unit of the group
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 12
Scenario: A server farm consists of dual- and single-processor servers. The administrator of the farm wants to ensure that the dual-processor servers receive more session than the single-processor servers.
In order to distribute the session load equitably among both types of servers, the administrator must assign the ___________. (Choose the correct option to complete the sentence.)
A. default load evaluator rule to all servers B. advanced load evaluator rule to all servers C. default load evaluator rule to all dual-processor servers D. advanced load evaluator rule to all dual-processor servers
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 13
Scenario: An administrator is setting up his first farm to handle approximately 75 users and decides upon a three server farm. There are two converns. The projected number of logons and log offs each hour may be high. In addition, the decision about whether to dedicate a single server to data collection has NOT been made.
What would be the best option to balance the number of users with using as many resources as possible to facilitate application publication?
A. Set two servers as Most Preferred in the Election Preference tab. B. Set all of the servers' electoin preference to Default Preference in the Election Preference tab. C. Set on server as a dedicated data collector by setting Most Preferred in the Election Preference tab. D. Set one server as Most Preferred in the Election Preference tab and assign a load balancing policy to it so it reads capacity.
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 14
A legacy application installed on the servers in a worker group has a memory leak.
How can the administrator minimize the impact of the memory leak?
A. Stream the application to the servers. B. Restart the servers at regular intervals using a policy. C. Apply the memory optimization policy to the worker group. D. Place the application with the memory leak on a separate XenApp server.
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 15
Scenario: A Citrix administrator manages a XenApp farm with hundreds of task workers. Management desires that user profiles be kept to a minimum size and stored in a centralized location. User changes must NOT be retained at logoff.
Based on there requirement, which type of profile should the administrator implement?
A. Local B. Roaming C. Mandatory D. Citrix Profile Management
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 16
Scenario: An administrator is hired to implement a new XenApp server farm in an existing network. The administrator needs to manage the Citrix license server, which is located behing a firewall.
Which port should the administrator ask the network security team to configure on the firewall to allow the administrator to manage the license server?
A. 135 B. 2513 C. 7279 D. 8082 E. 27000
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 17
Users have requested that their Citrix connections automatically reconnect when they log in to the Citrix Web Interface after they have been disconnected while travelling between sites.
Which Web Interface feature could the XenApp administrator configure to accomplish this task?
A. Persistent URLs B. Session Reliability C. Workspace Control D. Session preferences
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 18
A XenApp administrator does NOT have access to the AppCenter console at the moment and needs to be able to confirm which server in the farm is currently the zone data collector.
Which command line utility would provide the information the administrator needs?
A. qfarm B. qfarm /load C. dsmaint verifylhc D. dsmaint compare
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 19
Which access method must an administrator specify if a Web Interface server is required to provide the actual IP address of a XenApp server to an Access Gateway server?
A. Direct B. Alternate C. Translated D. Gateway Direct E. Gateway Alternate F. Gateway Translated
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 20
Scenario: An administrator needs to deliver an application to 1,500 user devices in the local network. The application will be delivered from a XenApp server farm consisting of 50 XenApp servers. When choosing how to deliver the application, the administrator must keep in mind that the user devices have little hard drive space and limited memory resources, the user devices will always be connected to the network and the application is updated often.
Which setting should the administrator choose when publishing the application?
A. Streamed to client B. Streamed to server C. Installed application D. Streamed if possible, otherwise accessed from a server
Answer: B
Section: (none)
Explanation/Reference:
Exam F
QUESTION 1
Scenario: A company has recently purchased 100 XenApp licenses to deploy a new XenApp farm that will provide the Microsoft Office Suite for remote users. The administrator configures Health Monitoring and Recovery options to ensure that alerts are submitted when the IMA Service is NOT working as expected.
The test queries the service to ensure that the IMA Service is working by ___________. (Choose the correct option to complete the sentence.)
A. enumerating the applications available on the server B. executing all of the applications available on the server C. launching at least one of the applications available on the server D. enumerating the current active sessions available on the server
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 2
Scenario: A server farm has three policies applied using the Client IP address and User filters.
- Policy A (priority 1) prevents client IP addresses in the 208.29.80.* range from accessing client, optical and removable drives. No other settings are configured.
- Policy B (priority 2) allows client IP addresses in the 208.29.80.* range to access network drives. All other settins are disabled.
- Policy C (priority 3) allows all domain users to access client, optical and removable drives. No other settings are configured.
Which drives will be available to a domain user accessing the server farm from a client using the 208.29.50.152 IP address?
A. No drives B. Network drivers C. Client, optical and removable drives D. Network, client and removable drives E. Network, client, optical and removable drives
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 3
Which policy must the administrator configure to enable the XPS data type with the universal printing system?
A. Universal printing B. Universal driver preference
C. Universal printing optimization defaults D. Universal printing EMF processing mode
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 4
Scenario: Ad aministrator recently configured Session Reliablility on a XenApp server which delivers one published application to 20 users on the local network. After configuration Session Reliablity, the administrator ran Microsoft TCPView to monitor a service that Session Reliability uses. The administrator notice that users are connecting to the published application on port 443 but NOT on the default Session Reliability port. The administrator verified that Session Reliabilility is configured and working.
Which two reasons explain why the users are connecting to the published application on port 443? (Choose two.)
A. SSL/TLS is enabled in the published applicatios's properties. B. Data encryption has been enabled using the SSL Relay Configuration tool. C. A policy is enabled to encrypt the session data between the server and user devices. D. The published application is configured to allow connections made through Access Gateway Advanced Edition.
Answer: AB
Section: (none)
Explanation/Reference:
QUESTION 5
Scenario: A XenApp farm consists of 10 XenApp servers divided into two workers groups with five servers in each. Workers Group 1 hosts applications for the Sales group and Worker Group 2 hosts applications for the Marketing group. A new application is introduced only to the Sales department. The application is installed on all servers.
How should the administrator cofigure the Users tab so that only the Sales group has access?
A. Publish the application to Worker Group 1. B. Publish the application to Worker Group 2. C. Publish the application only to the Sales group. D. Publish the application only to the Marketing group.
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 6
Scenario: Three Web Interface sites are configured on different server in a farm. The administrator wants to ensure that users are always able to access their applications through the Citrix Receiver.
How can the administrator configure the Web Interface sites to meet this requirement?
A. Enable site redirection for the sites. B. Configure backup URLs for the sites. C. Configure the direct access method for the sites. D. Configure the 'bypass and failed server for' setting for the sites.
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 7
Scenario: An administrator is setting up a XenApp farm. There are 15 to 25 users in the farm. To ensure high availability, two servers will be installed. The administrator is deciding on the best placement for the Web Interface server. Remote access is NOT going to be considered at this time.
The administrator should install the Web Interface ______________. (Choose the correct option to complete the sentence.)
A. on both servers B. on one of the two servers C. and XenApp on both servers D. and XenApp on one of the servers
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 8
Scenario: Users are receiving the error shown in the attached exhibit when connecting to Notepad on XenApp.
The administrator runs the QUERY FARM command on the server and receives the result shown in the second attached exhibit.
Which three events could the server load value of 10,000 indicate? (Choose three.)
Exhibit:
A. The server is offline. B. The server CANNOT contact the Citrix license server. C. The server has reached its limit of 10,000 running processes. D. A server load evaluator applied by policy indicates the server is at full load. E. The particular server has a problem reading performace counter information. F. The administrator has assigned an invalid load evaluator to the server using a policy.
Answer: DEF
Section: (none)
Explanation/Reference:
QUESTION 9
Scenario: Remote users connect to XenApp published applications using SSL VPN connections provided by an Access Gateway. These users are reporting that it takes more than one minute to authenticate their Active Directory credentials before displaying the list of applications. The most recent change in the enviornment was a set of Windows 2003 domain controllers that were retired from production since the company has already implemented new Windows 2008 domain controllers.
How can the administrator change the configuration of the secure access to allow faster authentication?
A. Disable the option on the Access Gateway that processes authentication with a pre-set dealy to maximize security. B. Modify the time synchronization option of the Access Gateway synchronization to work with the new Windows 2008 controllers. C. Obtain new licenses since the Access Gateway is NOT licensed properly, and it takes one minute to generate user D. Reconfigure the Access Gateway to user the new Window 2008 domain controllers instead of using the retired Windows domain controllers as the primay and seconday DNS servers.
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 10
Scenario: A Citrix administrator is migrating the servers in his farm from XenApp 5 on Windows Server 2003 with HRP3 to XenApp 6.5 for Windows Server 2008 R2. In the XenApp farm, a Zone Preference and Failover policy was used.
Which policy should the administrator use to replace the Zone Preference and Failover policy?
A. Citrix User B. Load Evaluator C. Load Balancing D. Citirix Computer
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 11
Scenario: User from the Sales department have raised complaints to the company's CEO, arguing that launching the CRM application on a XenApp server takes a significant amount of time and is impacting their prodictivity. The IT administrator has been asked to investigate the situation and find a solution to the problem. The administrator concludes that the creation of a session is being critically impacted due to profile loading and logon scripts, resulting in the one- to two-minute individual session creation times for sales users.
Which two steps could the administrator take to resolve the session in order to improve the user experience when connecting to the XenApp environment? (Choose two.)
A. Configure Just-in-Time Pre-launch for users in the Sales department. B. Configure a Scheduled Pre-launch for users launching the CRM application. C. Eliminate User profiles and disable all logon scripts for the users in the Sales department. D. Add additional memory to the end-point computers used by the users in the Sales department to connect to the XenApp application.
Answer: AB
Section: (none)
Explanation/Reference:
QUESTION 12
An administrator wishes to disable the prompt given to users when Flash content is displayed in their XenApp session without impacting the performance of Flash content.
See the attached exhibit to view the prompt window.
What should the administrotor do to achive this?
Exhibit:
A. Un-install the Flash player on the client PC B. Un-install the Flash player on the XenApp server. C. Create a XenApp policy that enables Flash redirection. D. Create a client-side group policy to always user Flash redirection.
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 13
An administrator has configured session printers for a group of XenApp users, but some are compalining that the advanced printer features are NOT available when they print to a particular printer.
Which driver(s) can the administrator install to provide access to the advanced printer features?
A. Citrix Universal Driver on the XenApp servers B. Manufacturer's latest drivers on the users' PCs C. Manufacturer's latest OEM drivers for the printer on the XenApp servers D. Drivers provided in the Windows drivers .CAB database on the XenApp servers
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 14
Scenario: An administrator manages a XenApp farm that uses only hosted applications. All users access the hosted applications through Web Interface using the online plug-in that does NOT require administrator rights to install.
Which method should the administrator user to deliver the required client plug-in with minimal effort?
A. Batch files B. Login scripts C. Citrix Web Interface D. Microsoft Group Policy E. Citrix Receiver Updater F. Citrix Merchandising Server
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 15
Scenario: Employees at company can access Microsoft Outlook 2010 and Adobe Reader offline. These employees complain that they CANNOT view PDF files when they receive emails containing attached PDF files.
Which action can the administrator take to solve this problem?
A. Publish the two applications with the same setting from the AppCenter. B. Precache the two packages on the users' computers instead of streaming them at lauch time. C. Create a new streaming profile to publish that links the Office 2010 streaming package with the Adobe Reader streaming D. When profiling, choose 'Advanced Install - Select files and folders' and copy the application executables from the two into each application profile.
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 16
A Senior Administrator wants to give a Junior Administrator complete rights to a folder of application while restricting some of his permissions to the overall farm.
The Senior Administrator must grant ____________. (Choose the correct option to complete the sentence.)
A. Custom Persmissions at the farm level and folder level B. Read Only Persmissions at the farm level and Full Permissions at the folder level C. Custom Permissions at the farm level, then Full Persmissions within the application folder D. Full Permissions at the farm level and then Custom Permissions within the application folder.
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 17
Scenario: A server farm consists of servers with 8 GB and 16 GB of RAM. The administrator wants to ensure that the servers with 16 GB of RAM receive more sessions then the 8 GB servers.
In order to distribute the session load equitably among both types of servers, the administrator could assign the ____________. (Choose the correct option to complete the sentence.)
A. default load evaluator rule to all servers B. advanced load evaluator rule to all servers C. default load evaluator rule to all 16 GB servers D. advanced load evaluator rule to all 16 GB servers
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 18
Scenario: An administrator configured multiple session printer policies for a group of users. Upon logging into one of the XenApp 6.5 servers, the administrator is NOT able to see any of these network session printers but does see other printers on the server.
Why is the administrator unable to see any of the users' network session printers?
A. Network printers are per-user connections B. The Citrix Printer Manager Service is hung or crashed. C. The Citrix printing policies are configured incorrectly. D. The administrator does NOT have persmission to the printer queues.
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 19
Scenario: A XenApp administrator must recommend a database option for a new XenApp 6.5 data store. The new farm will have multiple zones over WAN connections with low bandwidth and high latency.
Which two database options should the administrator recommend? (Choose two.)
A. Micrsoft SQL Server 2008 B. Micrsoft SQL Server 2008 R2 C. Micrsoft SQL Server 2008 Express D. Micrsoft SQL Server 2008 Express R2
Answer: AB
Section: (none)
Explanation/Reference:
QUESTION 20
Scenario: A company recently upgraded all their Citrix licenses from XenApp Enterprise to XenApp Platinum. The Citrix License Server has been correctly updated and configured with the correct Citrix license files. Now users are NOT able to connect.
Which step should the administrator take to allow users to connect again?
A. Restart the server hosting the Citrix data store. B. Upgrade the Delivery Services Console to the AppCenter. C. Update the XenApp product edition in the Computer policy. D. Restart all Citrix servers reporting 20,000 as their current load.
Answer: C
Section: (none)
Explanation/Reference:
Exam G
QUESTION 1
Scenario: An administrator has published Mircosoft Word on two identical servers in a server farm. There are 75 users in the envirornment, and each server must be allowed to accept all 75 users session for failover purposes. All users start work at 09:00 in the morning. The administrator wants to prevent server failure due to excessive connection attempts during this logon time.
Which option will meet the needs of this scenario?
A. Load balancing policy B. Defailt load evaluator C. Server session policy D. Advanced load evaluator
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 2
Scenario: Users are complaining of poor audio quality from their XenApp applications.They are using version 11 of the online plug-in. XenApp audio policy has been configured using the installation defaults.
What can the administrator do to improve audio quality?
A. Upgrade the users' online plug-in to version 13. B. Set the progressive compression to one level higher than the lossy compression. C. Configure a XenApp bandwidth limit policy and give audio redirection a 100% allocation. D. Create a XenApp Computer policy and increase the Windows Media Redirection buffer size to 10 seconds.
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 3
Scenario: A company has two XenApp 6.5 farms and two Web Interface servers, each hosting a specific business application. Because of legal reasons, the applications CANNOT be delivered from a single farm. Users complain that they often use the wrong URL or do NOT see the application they require.
Which two tasks can an administrator complete to reduce the users' confusion? (Choose two.)
A. Use a load balancer to provide a single URL to both Web Interface servers. B. On each Web Interface server, create a new Web Interface site for the alternate farm. C. On each Web Inferface server, add a second farm that is configured with at least one XML gateway from the alternate D. On each Web Inferface server, modify the existing farm configuration and add at least one XML gateway from the alternate E. Customize the Web Interface footer text on both Web Interface servers to remind the users of which application are
current server.
Answer: AC
Section: (none)
Explanation/Reference:
QUESTION 4
An administrator is using the AppCenter to control the logon settings for a XenApp 6.5 farm.
Which four of the listed options are valid logon control settings for servers in the AppCenter? (Choose four.)
A. Drain B. Prohibit logons only C. Drain until next restart D. Allow logons and reconnections E. Prohibit logons until server restart F. Prohibit logons and reconnections
Answer: BDEF
Section: (none)
Explanation/Reference:
QUESTION 5
Scenario: An administrator wishes to temporarily move users to servers in the disaster recovery site so maintenance can be performed on the production servers. A load balacing policy is used to the production site.
Which change to the load balancing policy should the administrator make to achieve this?
A. Reverse the workers priorities. B. Remove the worker group representing the primay site. C. Deselect the option to connect applications based on worker group preference. D. Apply a temporary filter based on the IP address range of the disaster recovery site.
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 6
Scenario: A company is testing application streaming to allow workers to use their application offline. The application being tested is Adobe Reader. The test is successful and now the administrator need to stream Microsoft Office 2010 also. Users must be able to read PDF files that are attached to emails opened in Microsoft Outlook 2010.
Which action must the administrator take to meet the requirements of the scenario?
A. Publish the two applications with the same settings from the AppCenter. B. Precache the two packages on the users' computer instead of streaming them at launch time. C. Link the Adobe Reader streaming package to the Office 2010 streaming package during profiling of the Office 2010 D. When profiling, choose 'Advance Install - Select files and folders' and copy the application executables from the two to each application profile.
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 7
An administrator needs to ensure that new XenApp servers are automatically added to worker groups.
When creating a worker group, which two options could the administrator select to meet the requirements of the scenario? (Choose two.)
A. Application Folder B. Load Security Group C. XenApp Farm Server Group D. Active Directory Server Group E. Active Directory Organizational Unit
Answer: DE
Section: (none)
Explanation/Reference:
QUESTION 8
Laptop users need to user a XenApp published application when they are disconnected from the corporate network.
Which two plugins should an administrator install and where should they be installed to meet the laptop user requirements? (Choose two.)
A. Citrix offline plug-in on the laptop B. Citrix online plug-in on the laptop C. Citrix streaming profiler on the laptop D. Citrix offline plug-in on the XenApp server E. Citrix online plug-in on the XenApp server F. Citrix streaming profiler on the XenApp server
Answer: AB
Section: (none)
Explanation/Reference: