我原来的单线程扫描器的改进版(多线程)

// PortScan.cpp : Defines the entry point for the console application.
//

///=============================================================================
/// PortScan - 端口扫描程序
///
/// 2005-7-8 16:49:52
///=============================================================================
#include <winsock2.h>
#include <stdio.h> //printf函数要用的头文件
#pragma comment(lib,"ws2_32.lib")

void Help();
DWORD WINAPI ScanThread(LPVOID lp);
void ReportAPIError();

//保存扫描的主机IP和端口的结构
typedef struct{
 char HostIp[17];
 int ScanPort;
}HostStruct;

long lPortOpen = 0; // 统计开放端口数

int main(int argc, char* argv[])
{
 WORD wVersion = MAKEWORD(2,0); //socket的版本
 WSADATA wsaData;
 int iFromPort;  //开始端口
 int iToPort;  //结束端口
 int iNowPort;  //正在扫描的端口
 int iPortCount;  //端口总数

 //如果命令行下参数不是4个（包括portscan.exe本身），提示正确的用法
 if(argc != 4)
 {
  Help();
  return -1;
 }

 //保存用户输入的要扫描的起始端口和结束端口,由于用户输入的是char型，所以要先转成int型 
 iFromPort = atoi(argv[2]);
 iToPort = atoi(argv[3]);

 //对用户输入的端口进行判断
 if(iFromPort > iToPort || iFromPort < 0 || iFromPort >65535 || iToPort <0 || iToPort >65535)
 {
  printf("起始端口不能大于结束端口，且范围为：1-65535!/n");
  return 0;
 }

 if (WSAStartup(wVersion , &wsaData))
 {
  printf("初始化失败！");
  return -1;
 }

 //要扫描的端口总数
 iPortCount = iToPort - iFromPort + 1;
 printf("端口范围: %d -> %d，共%d个./n",  iFromPort,iToPort , iPortCount);
 printf("/n======= 开始扫描 =======/n");

 // 根据端口数创建线程句柄数
 HANDLE *hThreads = new HANDLE[iPortCount];
 ZeroMemory(hThreads,sizeof(HANDLE)*iPortCount);
 //
 // 根据端口数创建线程参数结构指针，使用它只是为了记录结构指针，用于主线程释放动态内存
 //
 HostStruct** pScanHosts = new HostStruct*[iPortCount];
 ZeroMemory(pScanHosts,sizeof(HostStruct*)*iPortCount);

 //循环连接端口，以判断端口是否开放
 int iThreadCount = 0; // 成功创建的线程数目计数
 int iParamCount = 0;  // 线程句柄数组索引
 for(iParamCount = 0, iNowPort = iFromPort; iNowPort <= iToPort; iParamCount++,iNowPort++)
 {
  // 为单独的线程提供单独的线程参数，此参数不能在局部栈上分配
  pScanHosts[iParamCount] = new HostStruct;
  strcpy( pScanHosts[iParamCount]->HostIp,argv[1]);
  pScanHosts[iParamCount]->ScanPort = iNowPort;
  HANDLE hThread;
  hThread = CreateThread(NULL,NULL,ScanThread,pScanHosts[iParamCount],NULL,NULL);
  if(hThread == NULL)
  {
   ReportAPIError();
   continue;
  }
  else 
   hThreads[iThreadCount++] = hThread;//只统计正常运行的线程
 }

 printf("线程创建完毕！/n");

 //
 // 等待线程执行完毕，这一步是必须的，否则上面分配的动态内存会过早释放，线程执行时参数数据将出现异常
 //
 // WaitForMultipleObjects 所能等待的对象最大不能超过MAXIMUM_WAIT_OBJECTS （64）个，如果超过，进行分组等待
 //
 for(int iGroup = 0; iThreadCount>0; iGroup ++, iThreadCount -= MAXIMUM_WAIT_OBJECTS)
 {
  DWORD  res = WaitForMultipleObjects(
   iThreadCount>MAXIMUM_WAIT_OBJECTS ? MAXIMUM_WAIT_OBJECTS : iThreadCount,
   hThreads+iGroup*MAXIMUM_WAIT_OBJECTS,
   TRUE,
   INFINITE);
 
  if(res == WAIT_FAILED)
  {
   ReportAPIError();
   continue;
  }
 }
 printf("扫描完毕！/n");
 printf("共开放端口: %ld 个 /n",lPortOpen);
 
 // 释放所有动态分配的内存
 delete[iPortCount] hThreads;
 for(int ii=0; ii < iPortCount; ii ++ )
 {
  delete pScanHosts[ii];
 }
 delete[iPortCount] pScanHosts;
 WSACleanup();

 return 0;
}

//==============================================================================
// 线程函数
// 2005-7-8 16:52:41
//==============================================================================
DWORD WINAPI ScanThread(LPVOID lp)
{
 struct sockaddr_in sin;  //sockaddr_in结构
 SOCKET s;   //保存创建socket时的返回值

 //将参数传化成HostStruct结构指针
 HostStruct *lpScanHost=(HostStruct*)lp;

 s = socket(AF_INET,SOCK_STREAM,0);
 if(s == INVALID_SOCKET)
 {
  printf("创建socket()失败！/n");
 // WSACleanup();//这不是你应该在这里做的
 }

 //给结构成员赋值
 sin.sin_family = AF_INET;
 sin.sin_port = htons(lpScanHost->ScanPort);
 sin.sin_addr.S_un.S_addr = inet_addr(lpScanHost->HostIp);

 //建立连接
 if(connect(s,(struct sockaddr*)&sin,sizeof(sin)) == SOCKET_ERROR)
 {
  printf("%s -> %d:未开放/n",lpScanHost->HostIp,lpScanHost->ScanPort);  
 // closesocket(s);//not necessary!
 }
 else
 {
  printf("%s -> %d:开放/n",lpScanHost->HostIp,lpScanHost->ScanPort);
  //iPortOpen ++;
  InterlockedIncrement(&lPortOpen);
  closesocket(s);
 }
 
 return 0;
}

//以下为帮助函数内容
void Help()
{
 printf("/nPortScan V1.0 by:∮明天去要饭/n");
 printf("/nPortScan V1.1 by:meteor135 smith_135@163.com/n");
 printf("Usage:/n");
 printf("  PortScan.exe <TargetIP> <BeginPort> <EndPort>/n");
 printf("Example:/n");
 printf("  PortScan.exe 127.0.0.1 1 445/n"); 
}

//==============================================================================
// 报告API错误
// 2005-7-8 16:52:19
//==============================================================================
void ReportAPIError()
{
 LPVOID lpMsgBuf;
 if (!FormatMessage(
  FORMAT_MESSAGE_ALLOCATE_BUFFER |
  FORMAT_MESSAGE_FROM_SYSTEM |
  FORMAT_MESSAGE_IGNORE_INSERTS,
  NULL,
  GetLastError(),
  MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT), // Default language
  (LPTSTR) &lpMsgBuf,
  0,
  NULL ))
 {
  // Handle the error.
  return ;
 }
 // Display the string.
 printf("%s/n",lpMsgBuf);
 // Free the buffer.
 LocalFree( lpMsgBuf );
}

 现在这个多线程的扫描器，速度是挺快，不过还是有些小问题，以后如果有更好的版本，我会发出来给大家研究的。