网页播放器的参数含义 Windows Media Player 网页播放器

(默认0为否，-1或1为是)
<object classid= "clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95 " id= "MediaPlayer1 " width= "286 " height= "225 ">
<param name= "AudioStream " value= "-1 ">
<param name= "AutoSize " value= "-1 ">
<!--是否自动调整播放大小-->
<param name= "AutoStart " value= "-1 ">
<!--是否自动播放-->
<param name= "AnimationAtStart " value= "-1 ">
<param name= "AllowScan " value= "-1 ">
<param name= "AllowChangeDisplaySize " value= "-1 ">
<param name= "AutoRewind " value= "0 ">
<param name= "Balance " value= "0 ">
<!--左右声道平衡,最左-9640,最右9640-->
<param name= "BaseURL " value>
<param name= "BufferingTime " value= "15 ">
<!--缓冲时间-->
<param name= "CaptioningID " value>
<param name= "ClickToPlay " value= "-1 ">
<param name= "CursorType " value= "0 ">
<param name= "CurrentPosition " value= "0 ">
<!--当前播放进度 -1 表示不变,0表示开头 单位是秒,比如10表示从第10秒处开始播放,值必须是-1.0或大于等于0-->
<param name= "CurrentMarker " value= "0 ">
<param name= "DefaultFrame " value>
<param name= "DisplayBackColor " value= "0 ">
<param name= "DisplayForeColor " value= "16777215 ">
<param name= "DisplayMode " value= "0 ">
<param name= "DisplaySize " value= "0 ">
<!--视频1-50%, 0-100%, 2-200%,3-全屏 其它的值作0处理,小数则采用四舍五入然后按前的处理-->
<param name= "Enabled " value= "-1 ">
<param name= "EnableContextMenu " value= "-1 ">
<!-是否用右键弹出菜单控制-->
<param name= "EnablePositionControls " value= "-1 ">
<param name= "EnableFullScreenControls " value= "-1 ">
<param name= "EnableTracker " value= "-1 ">
<!--是否允许拉动播放进度条到任意地方播放-->
<param name= "Filename " value= "/blog/01.wma " valuetype= "ref ">
<!--播放的文件地址-->
<param name= "InvokeURLs " value= "-1 ">
<param name= "Language " value= "-1 ">
<param name= "Mute " value= "0 ">
<!--是否静音-->
<param name= "PlayCount " value= "10 ">
<!--重复播放次数,0为始终重复-->
<param name= "PreviewMode " value= "-1 ">
<param name= "Rate " value= "1 ">
<!--播放速率控制,1为正常,允许小数-->
<param name= "SAMIStyle " value>
<!--SAMI样式-->
<param name= "SAMILang " value>
<!--SAMI语言-->
<param name= "SAMIFilename " value>
<!--字幕ID-->
<param name= "SelectionStart " value= "-1 ">
<param name= "SelectionEnd " value= "-1 ">
<param name= "SendOpenStateChangeEvents " value= "-1 ">
<param name= "SendWarningEvents " value= "-1 ">
<param name= "SendErrorEvents " value= "-1 ">
<param name= "SendKeyboardEvents " value= "0 ">
<param name= "SendMouseClickEvents " value= "0 ">
<param name= "SendMouseMoveEvents " value= "0 ">
<param name= "SendPlayStateChangeEvents " value= "-1 ">
<param name= "ShowCaptioning " value= "0 ">
<!--是否显示字幕,为一块黑色,下面会有一大块黑色,一般不显示-->
<param name= "ShowControls " value= "-1 ">
<!--是否显示控制,比如播放,停止,暂停-->
<param name= "ShowAudioControls " value= "-1 ">
<!--是否显示音量控制-->
<param name= "ShowDisplay " value= "0 ">
<!--显示节目信息,比如版权等-->
<param name= "ShowGotoBar " value= "0 ">
<!--是否启用上下文菜单-->
<param name= "ShowPositionControls " value= "-1 ">
<!--是否显示往前往后及列表,如果显示一般也都是灰色不可控制-->
<param name= "ShowStatusBar " value= "-1 ">
<!--当前播放信息,显示是否正在播放,及总播放时间和当前播放到的时间-->
<param name= "ShowTracker " value= "-1 ">
<!--是否显示当前播放跟踪条,即当前的播放进度条-->
<param name= "TransparentAtStart " value= "-1 ">
<param name= "VideoBorderWidth " value= "0 ">
<!--显示部的宽部,如果小于视频宽,则最小为视频宽,或者加大到指定值,并自动加大高度.此改变只改变四周的黑框大小,不改变视频大小-->
<param name= "VideoBorderColor " value= "0 ">
<!--显示黑色框的颜色, 为RGB值,比如ffff00为黄色-->
<param name= "VideoBorder3D " value= "0 ">
<param name= "Volume " value= "0 ">
<!--音量大小,负值表示是当前音量的减值,值自动会取绝对值,最大为0,最小为-9640-->
<param name= "WindowlessVideo " value= "0 ">
<!--如果是0可以允许全屏,否则只能在窗口中查看-->
</object>

上面的这个播放器是老式的那种，6.4版本！新式播放器是在MediaPlayer9.0以后出现的，也就是说只有装了9.0或9.0以上的播放器才能正常使用的。

-------------------------------------------------------------------------------

下面是新式播放器代码，相对以前的来说要简单很多：
<object id= "player " height= "64 " width= "260 " classid= "CLSID:6BF52A52-394A-11d3-B153-00C04F79FAA6 ">
<param NAME= "AutoStart " VALUE= "-1 ">
<!--是否自动播放-->
<param NAME= "Balance " VALUE= "0 ">
<!--调整左右声道平衡,同上面旧播放器代码-->
<param name= "enabled " value= "-1 ">
<!--播放器是否可人为控制-->
<param NAME= "EnableContextMenu " VALUE= "-1 ">
<!--是否启用上下文菜单-->
<param NAME= "url " value= "/blog/1.wma ">
<!--播放的文件地址-->
<param NAME= "PlayCount " VALUE= "1 ">
<!--播放次数控制,为整数-->
<param name= "rate " value= "1 ">
<!--播放速率控制,1为正常,允许小数,1.0-2.0-->
<param name= "currentPosition " value= "0 ">
<!--控件设置:当前位置-->
<param name= "currentMarker " value= "0 ">
<!--控件设置:当前标记-->
<param name= "defaultFrame " value= " ">
<!--显示默认框架-->
<param name= "invokeURLs " value= "0 ">
<!--脚本命令设置:是否调用URL-->
<param name= "baseURL " value= " ">
<!--脚本命令设置:被调用的URL-->
<param name= "stretchToFit " value= "0 ">
<!--是否按比例伸展-->
<param name= "volume " value= "50 ">
<!--默认声音大小0%-100%,50则为50%-->
<param name= "mute " value= "0 ">
<!--是否静音-->
<param name= "uiMode " value= "mini ">
<!--播放器显示模式:Full显示全部;mini最简化;None不显示播放控制,只显示视频窗口;invisible全部不显示-->
<param name= "windowlessVideo " value= "0 ">
<!--如果是0可以允许全屏,否则只能在窗口中查看-->
<param name= "fullScreen " value= "0 ">
<!--开始播放是否自动全屏-->
<param name= "enableErrorDialogs " value= "-1 ">
<!--是否启用错误提示报告-->
<param name= "SAMIStyle " value>
<!--SAMI样式-->
<param name= "SAMILang " value>
<!--SAMI语言-->
<param name= "SAMIFilename " value>
<!--字幕ID-->
</object>