MINA 多路复用协议编解码器工厂一（多路复用协议编码器）

MINA 多路分离解码器实例：[url]http://donald-draper.iteye.com/blog/2375324[/url]
Mina 协议编解码过滤器一（协议编解码工厂、协议编码器）：
[url]http://donald-draper.iteye.com/blog/2376663[/url]
Mina 协议编解码过滤器二（协议解码器）：
[url]http://donald-draper.iteye.com/blog/2376679[/url]
Mina 队列Queue：[url]http://donald-draper.iteye.com/blog/2376712[/url]
Mina 协议编解码过滤器三（会话write与消息接收过滤）：
[url]http://donald-draper.iteye.com/blog/2376818[/url]

/**
 * A composite {@link ProtocolCodecFactory} that consists of multiple
 * {@link MessageEncoder}s and {@link MessageDecoder}s.
 * {@link ProtocolEncoder} and {@link ProtocolDecoder} this factory
 * returns demultiplex incoming messages and buffers to
 * appropriate {@link MessageEncoder}s and {@link MessageDecoder}s. 
 * 多路复用的协议编解码器工厂DemuxingProtocolCodecFactory包含多个消息编码器和解码器，此多路复用编解码器工厂，
 可以返回消息或buffer对应的编解码器，及多路分离。
 * <h2>Disposing resources acquired by {@link MessageEncoder} and {@link MessageDecoder}</h2>
 * <p>消息编解码器需要释放相应的资源。
 * We didn't provide any <tt>dispose</tt> method for {@link MessageEncoder} and {@link MessageDecoder}
 * because they can give you a big performance penalty in case you have a lot of
 * message types to handle.
 * 在消息编解码器中，我们没有提供dispose方法，因为dispose方法可能会对大量消息类型编码的情况下的性能有影响。
 * @author The Apache Directory Project (mina-dev@directory.apache.org)
 * @version $Rev$, $Date$
 * 
 * @see MessageEncoder
 * @see MessageDecoder
 */
public class DemuxingProtocolCodecFactory
    implements ProtocolCodecFactory
{
    private final DemuxingProtocolEncoder encoder = new DemuxingProtocolEncoder();//多路复用的协议编码器
    private final DemuxingProtocolDecoder decoder = new DemuxingProtocolDecoder();//多路复用的协议解码器
    public DemuxingProtocolCodecFactory()
    {
    }
    public ProtocolEncoder getEncoder(IoSession session)
        throws Exception
    {
        return encoder;
    }
    public ProtocolDecoder getDecoder(IoSession session)
        throws Exception
    {
        return decoder;
    }
    ...
}

从上面来看多路复用协议编解码工厂，包含一个多路复用的协议编码器和解码器。在往下看之前，我们先看一下多路复用的协议编码器和解码器。
先来看多路复用的协议编码器DemuxingProtocolEncoder：

public class DemuxingProtocolEncoder
    implements ProtocolEncoder
{
    private final AttributeKey STATE = new AttributeKey(getClass(), "state");
    //消息类型Class与编码器工厂MessageEncoderFactory映射关系CopyOnWriteMap<Class,MessageEncoderFactory>
    private final Map type2encoderFactory = new CopyOnWriteMap();
    private static final Class EMPTY_PARAMS[] = new Class[0];
     public DemuxingProtocolEncoder()
    {
    }
}

来看多路复用的协议编码器添加消息编码器操作：
//根据消息类型和消息编码器类型，添加消息编码器

 public void addMessageEncoder(Class messageType, Class encoderClass)
    {
        if(encoderClass == null)
            throw new IllegalArgumentException("encoderClass");
        try
        {
            encoderClass.getConstructor(EMPTY_PARAMS);//获取编码器无参构造
        }
        catch(NoSuchMethodException e)
        {
            throw new IllegalArgumentException("The specified class doesn't have a public default constructor.");
        }
        boolean registered = false;
	//如果编码器为MessageEncoder，则添加消息与消息编码工厂映射到消息编码器Map映射type2encoderFactory
        if(org/apache/mina/filter/codec/demux/MessageEncoder.isAssignableFrom(encoderClass))
        {
            addMessageEncoder(messageType, ((MessageEncoderFactory) (new DefaultConstructorMessageEncoderFactory(encoderClass))));
            registered = true;
        }
        if(!registered)
            throw new IllegalArgumentException((new StringBuilder()).append("Unregisterable type: ").append(encoderClass).toString());
        else
            return;
 }

来看添加消息类型与消息编码工厂的映射关系

 public void addMessageEncoder(Class messageType, MessageEncoderFactory factory)
    {
        if(messageType == null)
            throw new IllegalArgumentException("messageType");
        if(factory == null)
            throw new IllegalArgumentException("factory");
        synchronized(type2encoderFactory)
        {
	   //将消息类型与消息编码工厂的映射关系添加到type2encoderFactory
            if(type2encoderFactory.containsKey(messageType))
                throw new IllegalStateException((new StringBuilder()).append("The specified message type (").append(messageType.getName()).append(") is registered already.").toString());
            type2encoderFactory.put(messageType, factory);
        }
    }

来看默认构造消息编码工厂DefaultConstructorMessageEncoderFactory

private static class DefaultConstructorMessageEncoderFactory
        implements MessageEncoderFactory
    {
         private final Class encoderClass;//消息编码器类
	 private DefaultConstructorMessageEncoderFactory(Class encoderClass)
        {
            if(encoderClass == null)
                throw new IllegalArgumentException("encoderClass");
            if(!org/apache/mina/filter/codec/demux/MessageEncoder.isAssignableFrom(encoderClass))
            {
                throw new IllegalArgumentException("encoderClass is not assignable to MessageEncoder");
            } else
            {
                this.encoderClass = encoderClass;
                return;
            }
        }
	//生产消息编码器
        public MessageEncoder getEncoder()
            throws Exception
        {
	   //创建消息编码器实例
            return (MessageEncoder)encoderClass.newInstance();
        }
}

从上可以看出，多路复用的协议编码器添加消息编码器，如果参数为消息类型和消息编码器类型，添加消息类型与默认构造消息编码工厂
到消息编码器Map映射type2encoderFactory。
再来看根据消息类型和消息编码器实例添加消息编码器

 public void addMessageEncoder(Class messageType, MessageEncoder encoder)
    {
        //编码器工厂为单例消息编码器工厂
        addMessageEncoder(messageType, ((MessageEncoderFactory) (new SingletonMessageEncoderFactory(encoder))));
    }

//单例消息编码器工厂SingletonMessageEncoderFactory

 private static class SingletonMessageEncoderFactory
        implements MessageEncoderFactory
    {
        private final MessageEncoder encoder;//消息编码器实例
        private SingletonMessageEncoderFactory(MessageEncoder encoder)
        {
            if(encoder == null)
            {
                throw new IllegalArgumentException("encoder");
            } else
            {
                this.encoder = encoder;
                return;
            }
        }
	//获取单例消息解码器
        public MessageEncoder getEncoder()
        {
            return encoder;
        }
    }

从上可以看出，多路复用的协议编码器添加消息编码器，如果参数为消息类型和消息编码器实例，添加消息类型与单例消息编码器工厂
到消息编码器Map映射type2encoderFactory。
下面这几个消息编码器的方法，与上面两类方法无异，很容易理解

public void addMessageEncoder(Iterable messageTypes, Class encoderClass)
    {
        Class messageType;
        for(Iterator iterator = messageTypes.iterator(); iterator.hasNext(); addMessageEncoder(messageType, encoderClass))
            messageType = (Class)iterator.next();

    }
    public void addMessageEncoder(Iterable messageTypes, MessageEncoder encoder)
    {
        Class messageType;
        for(Iterator iterator = messageTypes.iterator(); iterator.hasNext(); addMessageEncoder(messageType, encoder))
            messageType = (Class)iterator.next();

    }
    public void addMessageEncoder(Iterable messageTypes, MessageEncoderFactory factory)
    {
        Class messageType;
        for(Iterator iterator = messageTypes.iterator(); iterator.hasNext(); addMessageEncoder(messageType, factory))
            messageType = (Class)iterator.next();
    }

再来看消息编码：

public void encode(IoSession session, Object message, ProtocolEncoderOutput out)
        throws Exception
    {
        State state = getState(session);//获取会话消息编码器状态
	//获取消息对应的编码器
        MessageEncoder encoder = findEncoder(state, message.getClass());
        if(encoder != null)
	    //编码消息
            encoder.encode(session, message, out);
        else
            throw new UnknownMessageTypeException((new StringBuilder()).append("No message encoder found for message: ").append(message).toString());
    }

编码消息方法有两点要关注
1.

State state = getState(session);//获取会话消息编码器状态

先来看会话编码器状态的定义：

private class State
    {

        private final ConcurrentHashMap findEncoderCache;//消息编码器缓存
        private final Map type2encoder;//消息与消息编码器映射关系
        final DemuxingProtocolEncoder this$0;
        private State()
            throws Exception
        {
            this$0 = DemuxingProtocolEncoder.this;
            super();
            findEncoderCache = new ConcurrentHashMap();
            type2encoder = new ConcurrentHashMap();
            java.util.Map.Entry e;
	    //遍历多路复用协议编码器的消息编码器Map映射type2encoderFactory
	    //将消息类型，与工厂生产的消息编码器映射添加到会话编码器状态State消息与消息编码器映射关系type2encoder
            for(Iterator iterator = type2encoderFactory.entrySet().iterator(); iterator.hasNext(); type2encoder.put(e.getKey(), ((MessageEncoderFactory)e.getValue()).getEncoder()))
                e = (java.util.Map.Entry)iterator.next();

        }
    }

再来看获取会话编码器状态:

private State getState(IoSession session)
        throws Exception
    {
        //从会话获取消息编码器状态，为空，则添加消息编码器状态到会话，否则返回会话编码器状态
        State state = (State)session.getAttribute(STATE);
        if(state == null)
        {
            state = new State();
            State oldState = (State)session.setAttributeIfAbsent(STATE, state);
            if(oldState != null)
                state = oldState;
        }
        return state;
    }

2.

//获取消息对应的编码器
MessageEncoder encoder = findEncoder(state, message.getClass());

//从会话消息编码器状态，获取消息类型对应的编码器

protected MessageEncoder findEncoder(State state, Class type)
    {
        return findEncoder(state, type, null);
    }
    private MessageEncoder findEncoder(State state, Class type, Set triedClasses)
    {
        MessageEncoder encoder = null;
        if(triedClasses != null && triedClasses.contains(type))
            return null;
	//从会话消息编码器状态缓存获取消息编码器
        encoder = (MessageEncoder)state.findEncoderCache.get(type);
	//不为null，则返回
        if(encoder != null)
            return encoder;
	//否则从会话消息编码器状态的消息编码器映射Map中获取消息编码器
        encoder = (MessageEncoder)state.type2encoder.get(type);
        if(encoder == null)
        {
	    //如果编码器为空，则获取消息类型的副接口对应的编码器
            if(triedClasses == null)
                triedClasses = new IdentityHashSet();
            triedClasses.add(type);
            Class interfaces[] = type.getInterfaces();
            Class aclass[] = interfaces;
            int i = aclass.length;
            int j = 0;
            do
            {
                if(j >= i)
                    break;
                Class element = aclass[j];
                encoder = findEncoder(state, element, triedClasses);
                if(encoder != null)
                    break;
                j++;
            } while(true);
        }
        if(encoder == null)
        {
	   //获取消息类型的父类对应的消息编码器
            Class superclass = type.getSuperclass();
            if(superclass != null)
                encoder = findEncoder(state, superclass);
        }
        if(encoder != null)
        {
	   //不为空，则添加消息编码器到会话消息编码器状态findEncoderCache
            state.findEncoderCache.put(type, encoder);
            MessageEncoder tmpEncoder = (MessageEncoder)state.findEncoderCache.putIfAbsent(type, encoder);
            if(tmpEncoder != null)
                encoder = tmpEncoder;
        }
        return encoder;
    }

从上面可以看出，多路复用的协议编码器编码消息，首先从会话获取消息编码器状态，从消息编码器状态获取消息对应的编码器（先从消息编码器查找，没有则从消息编码器映射type2encoder查找），如果没有消息对应的解码，则查找消息父接口和类对应的编码器，编码消息。

//释放会话编码器状态

 public void dispose(IoSession session)
        throws Exception
    {
        session.removeAttribute(STATE);
    }

我们再来消息编码器的定义：
//消息编码器工厂MessageEncoderFactory

public interface MessageEncoderFactory
{
    public abstract MessageEncoder getEncoder()
        throws Exception;
}

//MessageEncoder

public interface MessageEncoder
{
    public abstract void encode(IoSession iosession, Object obj, ProtocolEncoderOutput protocolencoderoutput)
        throws Exception;
}

多路复用的协议解码器DemuxingProtocolDecoder，我们在下一篇文章中再看。
[size=medium][b]总结：[/b][/size]
[color=blue]多路复用的协议编码器添加消息编码器，如果参数为消息类型和消息编码器类型，添加消息类型与默认构造消息编码工厂到消息编码器Map映射type2encoderFactory；如果参数为消息类型和消息编码器实例，添加消息类型与单例消息编码器工厂到消息编码器Map映射type2encoderFactory。多路复用的协议编码器编码消息，首先从会话获取消息编码器状态，从消息编码器状态获取消息对应的编码器（先从消息编码器查找，没有则从消息编码器映射type2encoder查找），如果没有消息对应的解码，则查找消息父接口和类对应的编码器，编码消息。[/color]