Linux: netstat command

About netstat

The netstat command is used to print network connections, routing tables, interface statistics, masquerade connections, and multicast memberships.

---

Examples

List All Ports (both listening and non listening ports)

List all ports using netstat -a

# netstat -a | more
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address          Foreign Address         State
tcp        0      0 localhost:30037        *:*                     LISTEN
udp        0      0 *:bootpc               *:*                                

Active UNIX domain sockets (servers and established)
Proto RefCnt Flags       Type       State         I-Node   Path
unix  2      [ ACC ]     STREAM     LISTENING     6135     /tmp/.X11-unix/X0
unix  2      [ ACC ]     STREAM     LISTENING     5140     /var/run/acpid.socket

List all tcp ports using netstat -at

# netstat -at
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 localhost:30037         *:*                     LISTEN
tcp        0      0 localhost:ipp           *:*                     LISTEN
tcp        0      0 *:smtp                  *:*                     LISTEN
tcp6       0      0 localhost:ipp           [::]:*                  LISTEN

List all udp ports using netstat -au

# netstat -au
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
udp        0      0 *:bootpc                *:*
udp        0      0 *:49119                 *:*
udp        0      0 *:mdns                  *:*

---

List Sockets which are in Listening State

List only listening ports using netstat -l

# netstat -l
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 localhost:ipp           *:*                     LISTEN
tcp6       0      0 localhost:ipp           [::]:*                  LISTEN
udp        0      0 *:49119                 *:*

List only listening TCP Ports using netstat -lt

# netstat -lt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 localhost:30037         *:*                     LISTEN
tcp        0      0 *:smtp                  *:*                     LISTEN
tcp6       0      0 localhost:ipp           [::]:*                  LISTEN

List only listening UDP Ports using netstat -lu

# netstat -lu
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
udp        0      0 *:49119                 *:*
udp        0      0 *:mdns                  *:*

List only the listening UNIX Ports using netstat -lx

# netstat -lx
Active UNIX domain sockets (only servers)
Proto RefCnt Flags       Type       State         I-Node   Path
unix  2      [ ACC ]     STREAM     LISTENING     6294     private/maildrop
unix  2      [ ACC ]     STREAM     LISTENING     6203     public/cleanup
unix  2      [ ACC ]     STREAM     LISTENING     6302     private/ifmail
unix  2      [ ACC ]     STREAM     LISTENING     6306     private/bsmtp

---

Show the statistics for each protocol

Show statistics for all ports using netstat -s

# netstat -s
Ip:
    11150 total packets received
    1 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    11149 incoming packets delivered
    11635 requests sent out
Icmp:
    0 ICMP messages received
    0 input ICMP message failed.
Tcp:
    582 active connections openings
    2 failed connection attempts
    25 connection resets received
Udp:
    1183 packets received
    4 packets to unknown port received.
.....

Show statistics for TCP (or) UDP ports using netstat -st (or) -su

# netstat -st
# netstat -su

---

Display PID and program names in netstat output using netstat -p

netstat -p option can be combined with any other netstat option. This will add the “PID/Program Name” to the netstat output. This is very useful while debugging to identify which program is running on a particular port.

# netstat -pt
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        1      0 ramesh-laptop.loc:47212 192.168.185.75:www        CLOSE_WAIT  2109/firefox
tcp        0      0 ramesh-laptop.loc:52750 lax:www ESTABLISHED 2109/firefox

---

Don’t resolve host, port and user name in netstat output

When you don’t want the name of the host, port or user to be displayed, use netstat -n option. This will display in numbers, instead of resolving the host name, port name, user name.

This also speeds up the output, as netstat is not performing any look-up.

# netstat -an

If you don’t want only any one of those three items ( ports, or hosts, or users ) to be resolved, use following commands.

# netsat -a --numeric-ports
# netsat -a --numeric-hosts
# netsat -a --numeric-users

---

Print netstat information continuously

netstat will print information continuously every few seconds.

# netstat -c
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 ramesh-laptop.loc:36130 101-101-181-225.ama:www ESTABLISHED
tcp        1      1 ramesh-laptop.loc:52564 101.11.169.230:www      CLOSING
tcp        0      0 ramesh-laptop.loc:43758 server-101-101-43-2:www ESTABLISHED
tcp        1      1 ramesh-laptop.loc:42367 101.101.34.101:www      CLOSING

^C

---

Find the non supportive Address families in your system

netstat --verbose

At the end, you will have something like this.

netstat: no support for `AF IPX' on this system.
netstat: no support for `AF AX25' on this system.
netstat: no support for `AF X25' on this system.
netstat: no support for `AF NETROM' on this system.

---

Display the kernel routing information using netstat -r

# netstat -r
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.1.0     *               255.255.255.0   U         0 0          0 eth2
link-local      *               255.255.0.0     U         0 0          0 eth2
default         192.168.1.1     0.0.0.0         UG        0 0          0 eth2

Note: Use netstat -rn to display routes in numeric format without resolving for host-names.

---

Find out on which port a program is running

# netstat -ap | grep ssh
(Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.)
tcp        1      0 dev-db:ssh           101.174.100.22:39213        CLOSE_WAIT  -
tcp        1      0 dev-db:ssh           101.174.100.22:57643        CLOSE_WAIT  -

Find out which process is using a particular port:

# netstat -an | grep ':80'

---

Show the list of network interfaces

# netstat -i
Kernel Interface table
Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg
eth0       1500 0         0      0      0 0             0      0      0      0 BMU
eth2       1500 0     26196      0      0 0         26883      6      0      0 BMRU
lo        16436 0         4      0      0 0             4      0      0      0 LRU

Display extended information on the interfaces (similar to ifconfig) using netstat -ie:

# netstat -ie
Kernel Interface table
eth0      Link encap:Ethernet  HWaddr 00:10:40:11:11:11
      UP BROADCAST MULTICAST  MTU:1500  Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
      Memory:f6ae0000-f6b00000

---

Reference

http://www.thegeekstuff.com/2010/03/netstat-command-examples/
http://www.computerhope.com/unix/unetstat.htm