华为 vrrp

最新推荐文章于 2021-06-15 21:39:07 发布

__Dong

最新推荐文章于 2021-06-15 21:39:07 发布

阅读量370

点赞数 4

分类专栏： # 路由

本文链接：https://blog.csdn.net/IO_print/article/details/104793093

版权

路由专栏收录该内容

12 篇文章 1 订阅

订阅专栏

拓扑图: 在这里插入图片描述

1.端口配置启用trunk 
[sw1]int g0/0/1
[sw1-GigabitEthernet0/0/1]por l t  
[sw1-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[sw1-GigabitEthernet0/0/1]int g0/0/2
[sw1-GigabitEthernet0/0/2]port link-type trunk 
[sw1-GigabitEthernet0/0/2]port tr a vlan all 

[sw 2]vlan ba 12 13
[sw 2]int g0/0/1
[sw 2-GigabitEthernet0/0/1]port l t 
[sw 2-GigabitEthernet0/0/1]port t a v a
[sw 2-GigabitEthernet0/0/1]int g0/0/2
[sw 2-GigabitEthernet0/0/2]port l t 
[sw 2-GigabitEthernet0/0/2]port t a v a

[sw 3]vlan ba 12 13
[sw 3]int g0/0/3 
[sw 3-GigabitEthernet0/0/3]port l t 
[sw 3-GigabitEthernet0/0/3]port t a v a
[sw 3-GigabitEthernet0/0/3]int g0/0/2
[sw 3-GigabitEthernet0/0/2]port l t 
[sw 3-GigabitEthernet0/0/2]port t a v a

2.接入层划分vlan
//R3  接口划分vlan
[sw 3-GigabitEthernet0/0/4]port l a 
[sw 3-GigabitEthernet0/0/4]port d v 12
[sw 3-GigabitEthernet0/0/4]int g0/0/1
[sw 3-GigabitEthernet0/0/1]po l a
[sw 3-GigabitEthernet0/0/1]po d v 13


//保证心跳线接口联通  (防止STP生成树 关闭接口)
[sw1]stp root primary  
[sw 2]stp root secondary 

3.配置接口 ip
[sw1]int vlan 12
[sw1-Vlanif12]ip add 12.0.0.1 24
[sw1-Vlanif12]int vlan 13       
[sw1-Vlanif13]ip add 13.0.0.1 24

[sw 2]int vlan 12
[sw 2-Vlanif12]ip add 12.0.0.2 24
[sw 2-Vlanif12]int vlan 13     
[sw 2-Vlanif13]ip add 13.0.0.2 24

4.配置 VRRP
[sw1]int vlan 12
[sw1-Vlanif12]vrrp vrid 12 virtual-ip 12.0.0.12
[sw1-Vlanif12]vrrp vrid 12 priority 105   // //默认100  值大者为master,当主设备宕机优先级降10,因此设置成105
[sw1-Vlanif12]int vlan 13 
[sw1-Vlanif13]vrrp vrid 13 virtual-ip 13.0.0.13


[sw 2]int vlan 12
[sw 2-Vlanif12]vrrp vrid 12 virtual-ip 12.0.0.12
[sw 2-Vlanif12]int vlan 13 
[sw 2-Vlanif13]vrrp vrid 13 virtual-ip 13.0.0.13
[sw 2-Vlanif13]vrrp vrid 13 priority 105

dis vrrp bref  //查看vrrp状态