HDMI Retimer

IT66318 is a single in, single out HDMI 2.0 retiming buffer that supports a signaling rate of up to 6.0 Gbps. 
IT66318是一款单进单出HDMI 2.0重定时缓冲器，支持高达6.0 Gbps的信号速率。

It is compliant to the latest HDMI 2.0d specification and backward compatible to HDMI 1.4 specification. 
它符合最新的HDMI 2.0d规范，并向后兼容HDMI 1.4规范。

With 6.0 Gbps capability, IT66318 can support ultra-high resolution content stream, such as 4K x 2K@60Hz format. 
IT66318具有6.0 Gbps的传输能力，可支持4K x 2K@60Hz格式等超高分辨率内容流。

At extremely high data rate like this, signal quality drops significantly with extended board trace or cable length, making an additional retiming buffer necessary in many systems.
在这样的极高数据速率下，信号质量会随着电路板走线或电缆长度的延长而显著下降，这使得在许多系统中需要额外的重定时缓冲器。

The IT66318 equalizes incoming TMDS signal to optimal and outputs retimed data to downstream sinks. 
IT66318将输入的TMDS信号均衡到最佳状态，并将重新定时的数据输出到下游sink。

The highly acclaimed equalization technology of ITE TECH. INC. provides for support of long or low quality on board PCB trace at even the highest speeds. 
ITE TECH公司广受好评的均衡技术即使在最高速度下也能支持长时间或低质量的板载PCB走线。

Input terminations of the TMDS inputs and output terminations and current levels are both detachable and programmable.
TMDS的输入端和输出端以及电流电平都是可拆卸和可编程的。

Active DDC buffer is employed in IT66318 to completely isolate downstream DDC loading from upstream source, without addecting communication on the DDC bus, including backward Read Request feature defined in HDMI 2.0.
在IT66318中使用有源DDC缓冲器来完全隔离下游DDC负载与上游源，而不需要在DDC总线上添加通信，包括HDMI 2.0中定义的向后读请求功能。

With embedded MCU and Flash, IT66318 can be easily program med through the ISP interface. 
IT66318内置MCU和Flash，可通过ISP接口轻松编程。

The integrated MCU controls IT66318 by itself thus reducing customer development and programming efforts and saving the BoM cost and board size with no external processors needed.
集成的MCU自行控制IT66318，从而减少了客户的开发和编程工作，节省了BoM成本和电路板尺寸，无需外部处理器。